problem with my seatpost fuji sst 3.0

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

Forum rules
Post Reply
jasonliliong
Posts: 6
Joined: Wed May 09, 2012 5:24 pm

by jasonliliong on Mon Jun 11, 2012 2:56 pm

when the bolt is fully tightened, my seatpost continues to fall down...

So what is the solution to solve this problem ???

Anybody's help.

Thanks
Top

by Weenie on Mon Jun 11, 2012 2:56 pm


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com


Top
drmutley
Posts: 338
Joined: Fri Feb 11, 2011 4:23 am

by drmutley on Mon Jun 11, 2012 3:16 pm

Carbon paste
Top
artray
Posts: 1347
Joined: Fri Oct 07, 2011 2:08 pm

by artray on Mon Jun 11, 2012 8:29 pm

If your seatpost still slips with carbon paste, just put some clear coat round the seatpost, so it becomes a tight fit into the frame and clamp as normal and it will not slip, plus you will not need to tighten so much.
Top
drmutley
Posts: 338
Joined: Fri Feb 11, 2011 4:23 am

by drmutley on Wed Jun 13, 2012 4:41 am

artray wrote:If your seatpost still slips with carbon paste, just put some clear coat round the seatpost, so it becomes a tight fit into the frame and clamp as normal and it will not slip, plus you will not need to tighten so much.


+1
Resist the temptation to over tighten as those fujis from experience have a tendency to crack
Top
Post Reply

Return to “Road”