Dogma 2 Electronic BB shell

View unanswered posts | View active topics

Board index » Discussion » Road

Dogma 2 Electronic BB shell

Page 1 of 2

[ 16 posts ]

Go to page 1, 2 Next

Print view

Previous topic | Next topic

Author

Message

ParisCarbon

Post subject: Dogma 2 Electronic BB shell

Posted: Sun Jun 10, 2012 4:38 am

Joined: Mon Feb 05, 2007 5:39 am
Posts: 644
Location: Winnipeg Canada

If anyone has a Dogma2 Electronic would you be able to tell me if there is anyway to mount an SRM cadence sensor under there without gluing (ie is there a threaded screw hole for a traditional cable guide) Picture would be nice too if you could!
Many thanks in advance!

Top

ilvwhtgrls

Post subject: Re: Dogma 2 Electronic BB shell

Posted: Sun Jun 10, 2012 6:21 am

Shop Owner

Joined: Tue Feb 08, 2011 7:56 am
Posts: 130
Location: California

We have used the stock SRM style mount but used double sided tape. It sounds pretty hokey but it's secure.

Top

RobyDogma

Post subject: Re: Dogma 2 Electronic BB shell

Posted: Sun Jun 10, 2012 10:58 am

Joined: Mon Mar 12, 2012 8:05 pm
Posts: 20
Location: Stockholm Sweden

Have used double sided tape on my dogma for 6 months without any problems, go for it!

/Roberto

Top

ParisCarbon

Post subject: Re: Dogma 2 Electronic BB shell

Posted: Sun Jun 10, 2012 1:06 pm

Joined: Mon Feb 05, 2007 5:39 am
Posts: 644
Location: Winnipeg Canada

Thanks guys... just exploring some options.... another site I found recommended 3M Marine Sealant as well..
Did you guys just use plain old double sided tape then?? Nothing extreme??

Top

RobyDogma

Post subject: Sv: Dogma 2 Electronic BB shell

Posted: Sun Jun 10, 2012 1:16 pm

Joined: Mon Mar 12, 2012 8:05 pm
Posts: 20
Location: Stockholm Sweden

Yupp!

Nothing special just standard tape.

Skickat från min GT-I9100 via Tapatalk 2

Top

ParisCarbon

Post subject: Re: Dogma 2 Electronic BB shell

Posted: Sun Jun 10, 2012 1:47 pm

Joined: Mon Feb 05, 2007 5:39 am
Posts: 644
Location: Winnipeg Canada

Thanks!!!

Top

RobyDogma

Post subject: Re: Dogma 2 Electronic BB shell

Posted: Sun Jun 10, 2012 1:48 pm

Joined: Mon Mar 12, 2012 8:05 pm
Posts: 20
Location: Stockholm Sweden

No problems

Top

maxxevv

Post subject: Re: Dogma 2 Electronic BB shell

Posted: Sun Jun 10, 2012 2:54 pm

Joined: Wed Feb 09, 2005 4:51 am
Posts: 1555

If you want peace of mind, can always opt for the 3M VHB tape. Look for the "outdoors" application version that's grey in colour.

I used it to glue the normal cadence sensor to my crank. Has held for the past 4 years! :thumbup:

Top

Geoff

Post subject: Re: Dogma 2 Electronic BB shell

Posted: Sun Jun 10, 2012 4:32 pm

Joined: Sat Dec 13, 2003 2:25 am
Posts: 3947
Location: Canada

Why would you not toss the SRM thing and just glue-on a rare-earth magnet to the frame?

Top

ParisCarbon

Post subject: Re: Dogma 2 Electronic BB shell

Posted: Sun Jun 10, 2012 5:04 pm

Joined: Mon Feb 05, 2007 5:39 am
Posts: 644
Location: Winnipeg Canada

Saw the 3M tape as well in a search.

I don't want to glue personally.. but thats just me... it is a valid option though!

Just tossing around a build right now and looking at how much the bank account would suffer!!

Top

MoreRideTime

Post subject: Re: Dogma 2 Electronic BB shell

Posted: Mon Jun 11, 2012 2:54 pm

Joined: Sun Sep 17, 2006 9:09 pm
Posts: 52
Location: Canada

I remember seeing a photo of Wiggin's time trial bike a while back. It showed a rare earth magnet glued to the down tube for the SRM. Looked to be a very clean setup. Here's the photo:

Attachment:

wiggins_sky_graal_srm_magnet_600.jpg [ 31.57 KiB | Viewed 574 times ]

Top

ParisCarbon

Post subject: Re: Dogma 2 Electronic BB shell

Posted: Mon Jun 11, 2012 5:12 pm

Joined: Mon Feb 05, 2007 5:39 am
Posts: 644
Location: Winnipeg Canada

Hmm that with the 3M tape would be even better....

Top

Geoff

Post subject: Re: Dogma 2 Electronic BB shell

Posted: Tue Jun 12, 2012 12:41 am

Joined: Sat Dec 13, 2003 2:25 am
Posts: 3947
Location: Canada

No, it wouldn't.

If you don't want to have any glue residue on the frameset, just steal your wife/gf's hot glue gun and use that. Make sure you have a good bit of a 'bead' around the magnet and it will stay-put just fine. It will come-off without any affect to your frameset.

Top

maxxevv

Post subject: Re: Dogma 2 Electronic BB shell

Posted: Tue Jun 12, 2012 2:21 am

Joined: Wed Feb 09, 2005 4:51 am
Posts: 1555

Geoff wrote:

Sounds like you have not used VHB tape before ??

Top

Geoff

Post subject: Re: Dogma 2 Electronic BB shell

Posted: Tue Jun 12, 2012 3:39 am

Joined: Sat Dec 13, 2003 2:25 am
Posts: 3947
Location: Canada

The VHB tape is too sticky. You need to be able to glue-on the magnet, test it and reposition it, if necessary...

Top

Page 1 of 2

[ 16 posts ]

Go to page 1, 2 Next

Board index » Discussion » Road

Who is online

Users browsing this forum: Bing [Bot], Dbfire, fio, Google [Bot], Grill, jmilliron, MoreRideTime, tommasini, wingguy and 81 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

	Author	Replies	Views	Last post
68mm campag ultra torque in 72 mm shell? in Road	SupaSubi	2	328	Fri Aug 10, 2012 8:45 pm SupaSubi
why aren't electric shift batteries located in the bb shell? in Road	fivethirtyonepm	2	396	Mon Dec 31, 2012 1:42 pm freeloader
Going electronic on a budget in Road	billstr	3	797	Mon Jan 28, 2013 5:46 pm billstr
Shimano Electronic - Considering DI2 in Road	photocycler	11	764	Wed Jun 12, 2013 9:14 pm eliflap-scalpel
Tiso 12 speed electronic is here in Road	artray	12	1726	Fri Dec 14, 2012 3:16 am Privateer