problem with my seatpost fuji sst 3.0

Discuss light weight issues concerning road bikes & parts.
Post Reply
jasonliliong
Posts: 6
Joined: Wed May 09, 2012 5:24 pm

by jasonliliong

when the bolt is fully tightened, my seatpost continues to fall down...

So what is the solution to solve this problem ???

Anybody's help.

Thanks

by Weenie


drmutley
Posts: 344
Joined: Fri Feb 11, 2011 4:23 am

by drmutley

Carbon paste

artray
Posts: 1365
Joined: Fri Oct 07, 2011 2:08 pm

by artray

If your seatpost still slips with carbon paste, just put some clear coat round the seatpost, so it becomes a tight fit into the frame and clamp as normal and it will not slip, plus you will not need to tighten so much.

drmutley
Posts: 344
Joined: Fri Feb 11, 2011 4:23 am

by drmutley

artray wrote:If your seatpost still slips with carbon paste, just put some clear coat round the seatpost, so it becomes a tight fit into the frame and clamp as normal and it will not slip, plus you will not need to tighten so much.


+1
Resist the temptation to over tighten as those fujis from experience have a tendency to crack

Post Reply
  • Similar Topics
    Replies
    Views
    Last post