Dogma 2 Electronic BB shell

Page 1 of 2

[ 16 posts ]

Go to page 1, 2  Next

Print view Previous topic | Next topic

Author	Message
ParisCarbon	Post subject: Dogma 2 Electronic BB shell Posted: Sun Jun 10, 2012 4:38 am
Joined: Mon Feb 05, 2007 5:39 am Posts: 644 Location: Winnipeg Canada	If anyone has a Dogma2 Electronic would you be able to tell me if there is anyway to mount an SRM cadence sensor under there without gluing (ie is there a threaded screw hole for a traditional cable guide) Picture would be nice too if you could! Many thanks in advance!
Top

ilvwhtgrls	Post subject: Re: Dogma 2 Electronic BB shell Posted: Sun Jun 10, 2012 6:21 am
Shop Owner Joined: Tue Feb 08, 2011 7:56 am Posts: 130 Location: California	We have used the stock SRM style mount but used double sided tape. It sounds pretty hokey but it's secure.
Top

RobyDogma	Post subject: Re: Dogma 2 Electronic BB shell Posted: Sun Jun 10, 2012 10:58 am
Joined: Mon Mar 12, 2012 8:05 pm Posts: 18 Location: Stockholm Sweden	Have used double sided tape on my dogma for 6 months without any problems, go for it! /Roberto
Top

ParisCarbon	Post subject: Re: Dogma 2 Electronic BB shell Posted: Sun Jun 10, 2012 1:06 pm
Joined: Mon Feb 05, 2007 5:39 am Posts: 644 Location: Winnipeg Canada	Thanks guys... just exploring some options.... another site I found recommended 3M Marine Sealant as well.. Did you guys just use plain old double sided tape then?? Nothing extreme??
Top

RobyDogma	Post subject: Sv: Dogma 2 Electronic BB shell Posted: Sun Jun 10, 2012 1:16 pm
Joined: Mon Mar 12, 2012 8:05 pm Posts: 18 Location: Stockholm Sweden	Yupp! Nothing special just standard tape. Skickat från min GT-I9100 via Tapatalk 2
Top

ParisCarbon	Post subject: Re: Dogma 2 Electronic BB shell Posted: Sun Jun 10, 2012 1:47 pm
Joined: Mon Feb 05, 2007 5:39 am Posts: 644 Location: Winnipeg Canada	Thanks!!!
Top

RobyDogma	Post subject: Re: Dogma 2 Electronic BB shell Posted: Sun Jun 10, 2012 1:48 pm
Joined: Mon Mar 12, 2012 8:05 pm Posts: 18 Location: Stockholm Sweden	No problems
Top

maxxevv	Post subject: Re: Dogma 2 Electronic BB shell Posted: Sun Jun 10, 2012 2:54 pm
Joined: Wed Feb 09, 2005 4:51 am Posts: 1548	If you want peace of mind, can always opt for the 3M VHB tape. Look for the "outdoors" application version that's grey in colour. I used it to glue the normal cadence sensor to my crank. Has held for the past 4 years!
Top

Geoff	Post subject: Re: Dogma 2 Electronic BB shell Posted: Sun Jun 10, 2012 4:32 pm
Joined: Sat Dec 13, 2003 2:25 am Posts: 3908 Location: Canada	Why would you not toss the SRM thing and just glue-on a rare-earth magnet to the frame?
Top

ParisCarbon	Post subject: Re: Dogma 2 Electronic BB shell Posted: Sun Jun 10, 2012 5:04 pm
Joined: Mon Feb 05, 2007 5:39 am Posts: 644 Location: Winnipeg Canada	Saw the 3M tape as well in a search. I don't want to glue personally.. but thats just me... it is a valid option though! Just tossing around a build right now and looking at how much the bank account would suffer!!
Top

MoreRideTime	Post subject: Re: Dogma 2 Electronic BB shell Posted: Mon Jun 11, 2012 2:54 pm
Joined: Sun Sep 17, 2006 9:09 pm Posts: 51 Location: Canada	I remember seeing a photo of Wiggin's time trial bike a while back. It showed a rare earth magnet glued to the down tube for the SRM. Looked to be a very clean setup. Here's the photo: Attachment: wiggins_sky_graal_srm_magnet_600.jpg [ 31.57 KiB | Viewed 543 times ]
Top

ParisCarbon	Post subject: Re: Dogma 2 Electronic BB shell Posted: Mon Jun 11, 2012 5:12 pm
Joined: Mon Feb 05, 2007 5:39 am Posts: 644 Location: Winnipeg Canada	Hmm that with the 3M tape would be even better....
Top

Geoff	Post subject: Re: Dogma 2 Electronic BB shell Posted: Tue Jun 12, 2012 12:41 am
Joined: Sat Dec 13, 2003 2:25 am Posts: 3908 Location: Canada	No, it wouldn't. If you don't want to have any glue residue on the frameset, just steal your wife/gf's hot glue gun and use that. Make sure you have a good bit of a 'bead' around the magnet and it will stay-put just fine. It will come-off without any affect to your frameset.
Top

maxxevv	Post subject: Re: Dogma 2 Electronic BB shell Posted: Tue Jun 12, 2012 2:21 am
Joined: Wed Feb 09, 2005 4:51 am Posts: 1548	Geoff wrote: No, it wouldn't. If you don't want to have any glue residue on the frameset, just steal your wife/gf's hot glue gun and use that. Make sure you have a good bit of a 'bead' around the magnet and it will stay-put just fine. It will come-off without any affect to your frameset. Sounds like you have not used VHB tape before ??
Top

Geoff	Post subject: Re: Dogma 2 Electronic BB shell Posted: Tue Jun 12, 2012 3:39 am
Joined: Sat Dec 13, 2003 2:25 am Posts: 3908 Location: Canada	The VHB tape is too sticky. You need to be able to glue-on the magnet, test it and reposition it, if necessary...
Top

Display posts from previous: All posts1 day7 days2 weeks1 month3 months6 months1 year Sort by AuthorPost timeSubject AscendingDescending

Page 1 of 2

[ 16 posts ]

Go to page 1, 2  Next