Hey guys, first post here. Just got the new 2012 Cannondale CAAD 10 5 105 with SRAM S80 wheel set. Everything else is stock. It's actually my first bike. Hoping this forum can help me with what new parts/upgrades I should go with. Will post more pix with each upgrade. Thanks in advance WW community


Shot at 2012-06-09

Nice looking ride!! Check the CAAD thread.....tons of ideas for upgrades! Welcome!

_________________
2012 Fuji Altamira SE - 6.42kg

viewtopic.php?f=10&t=111416" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;

Wheels and cranks, many more options for stiffer and lighter.

Depends on your budget. Want lightweight? Hollowgram cranks. SRAM Red. Lighter wheels. New stem, bars, seatpost and saddle. Basically everything. Probably better to ride the bike as is or buy a 2nd frame and start from scratch as a 2nd bike.

_________________
"Let's plunge ourselves into the roar of time, the whirl of accident; may pain and pleasure, success and failure, shift as they will -- it's only action that can make a man."

Ride the hell out of it and when you find a part that you find "flawed" you replace it. Until then, keep riding.

before you do anything--clipless pedals and some road shoes. sure, you'll lose the ability to walk around off the bike, but with such a flashy bike i wouldn't leave it locked up anywhere for any period of time (regardless of the type of lock).

that said, you will notice a huge (and i mean HUGE) improvement in your riding. no wasted energy on shoes flexing. there's a bit of a learning curve if you've never used them before, but its worth your time to do it.

i have the speedplay light action pedal and a pair of pearl izumi kicks (can't remember the specific model, but they're a few years old). i'm quite happy with those. they fit well and the pedals are very secure with good adjustment and float.

word of advice and/or oppinion, if you're trying to upgrade on a budget, spend more on shoes and less on pedals. its better to have a rockin pair of shoes that fit well with good adjustability (ie, a ratchet with velcro straps than just velcro) than have a stupid light pedal with shoes that cause blisters and hotspots.

as far as the rest of the bike, i wouldn't worry too much about the upgrading at this point if this is your first bike. just run it into the ground haha after you've been riding for a while and built up your knowledge base on cycling equipment, then you can decide what you want to upgrade.

anyway.

seatpost, saddle and bars are a good place to go from there. the cannondale branded stuff weighs about as much as a lead brick... i have a ritchey WCS one-bolt carbon post and matching aluminium bars and stem on my CAAD 9. i'm quite pleased with those. when you go for the stem and bars, it will probably be a good idea to get professionally fitted while you're at it.

cranks are another spot to seriously consider upgrading--you'll drop weight obviously, but you'll get improved front shifting as well. i have a SRAM Force BB30 crank, which was an excellent upgrade from the gossamer BB30. if you've got the budget, go for for the cannondale hollogram SI.

but the drivetrain... run that into the ground without question. from there, you can decide if you want to go for dura-ace, or switch to sram or campagnolo.

personally, i would ditch the S80s unless your locale is flat as a pancake. i would have gone for a much lighter set of wheels, but it's pretty hilly around these parts, so rotational mass is a big concern of mine. if you've only got flat roads, aerodynamic performance might be a higher priority.

and of course, spend as much time as you can on here before you do anything. this forum is fantastic.

Agreed. No need to upgrade brand new parts on a first time road bike after just getting into the sport. Ride the bike. Ride it some more. Then when parts break, then upgrade. Unless you have money just sitting around the house.

_________________
"Let's plunge ourselves into the roar of time, the whirl of accident; may pain and pleasure, success and failure, shift as they will -- it's only action that can make a man."

Clipless pedals and brakes. Stock Cannondale brakes are shite. Once you've done that; ride it, race it, crash it and love it! Work out what sort of position works best for you and then once you've got that down pat just upgrade things one by one.

_________________
CAAD10 Di2

You've got yourself a fine first bike. Get yourself clipless pedals/shoes and be done with it for now, and probably get some form of fitting done if you haven't already been. It's not a blingy upgrade, but by far one of the most important since you won't enjoy riding if you're uncomfortable.

Upgrade pieces as you go along and you'll learn to appreciate the differences between bike parts and where you're getting value from. It's the fun part of making your bike customized to yourself.

_________________
Flickr
2012 Cannondale CAAD10

Wow, first off thanks to all for taking the time with the great advice, I now know what this forum is capable of.

A majority of the replies stated pedals and shoes so I think I'll start with that and ride the bike to hell and back before tweaking it some more.

Haha tcurtbike I hope I don't crash it, but riding in NYC it's highly probable.

And jcconnox, it's not too hilly in the areas I ride so I'll play around with the S80s for a while and go lighter on my next wheelset.

Thanks again WW pplz, more pix to come.