it feeling* and it being* are too different things. just go by your critcal measurements

Current build is:
Frame = 2012 CAAD10 54cm
Fork = 2012 CAAD10
Headset = OEM
Brakes = SRAM Force
FD = SRAM Force
RD = SRAM Force
Cables = Yokozuna Reaction
Chain = KMC X10-SL Gold
Cassette = Ultegra 6700 12 - 25
Seatpost = Bontrager Race light carbon
Saddle = Prologo
Crankset = 2012 Force BB30 53/39
Pedals = Speedplay Zero Cr-Mo
Cages = Elite
Wheels = Dura Ace WH-7850-SL
Tyres = Schwable Ultremo
Tubes = Vittoria
Handlebars = Ritchey WSC EVO Curve wet white
Stem = 115mm Ritchey WSC 4 Axis wet white
Levers = SRAM Force
Tape = Fizik Microtek Black

Weight as you see it = 7.4kgs

_________________
2012 CAAD10 SRAM Force

Where did you get the stem?.I did´nt know that Ritchey made "Half" sizes...?

Ritcheys and Eastons often measure 5mm +/- what the marked length actually is. Same with 3T -17 stems.

From memory I ordered it as a 110mm measures 115mm, I always assumed I received the wrong one.

Cheers
Dave.

_________________
2012 CAAD10 SRAM Force

I could use a 105mm.I have contacted several shops and dealers to hear if they could help...That would off course involve some unpacking and measuring which none of them were interested in doing .I also contacted Ritchey Europe and they promised that i would be contacted by the national distributor to hear if they could help but i never heard from them.I guess there are a few options regarding a 105mm stem out there...But i would like to keep bar,stem and seatpost to the same brand.I´m on the lookout for a Ritchey WCS 44 or the c260 in wet black...Either a "Short" 110mm or a "Long" 100mm

There is a CAAD10 in this picture, on the Gavia yesterday.

Record/Chorus 10, Neutron Ultras, Newton Shallows, black Hollowgram Si SL

That's a beautiful picture and good looking bike. Nice spec

_________________
/jonas l
http://cerrol.wordpress.com (my cyclingblog)

Caad 10 63cm, Super Record, Extralite Stem, KCNC Post, Schmolke Bar..

_________________
Caad10, Supersix, CaadX, Lynskey Pro29, Rocky Altitude 29

Judging by the cut steerer I'd say you have your fit dialed in... but that saddle to bar drop looks huge.
Very nice bike and choice of components, the black parts really set of the frame

_________________

2011 Cannondale Flash F1
2010 Cannondale Caad9
2000 Cannondale Caad 4 aero
1999 Cannondale Caad1
???? Concorde SS

Agree!! Awesome looking set-up! That saddle/bar drop is PRO.

_________________
2012 Fuji Altamira SE - 6.42kg

viewtopic.php?f=10&t=111416" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;

Not sure if this is the right place to post this but I recently purchased a 2011 CAAD10 frame (frame only) and was wondering if an 09 SuperSix fork would work with it? Didn't want to start a new thread but if need be I can make one. Any help would be cool, thanks.

The supersix fork is 1,5" and the caad10 is 1,25" in the bottom so won't work in any way. If you want a lighter fork an Evofork will fit

_________________
/jonas l
http://cerrol.wordpress.com (my cyclingblog)

Thanks for the response. I'll keep an eye out for one or if anyone has a black 2011 CAAD10 fork they are looking to sell I'd be interested.

This is my very first post! I've been looking around for quite some time now.

My roadie is a CAAD 10 as well, but it's not quite up to WW standards yet.

Anyway, great forum!