stem

Moderator: Moderator Team

Page 1 of 1

[ 10 posts ]

Previous topic | Next topic

Author	Message
cycleforlife	Post subject: stem Posted: Mon Jun 04, 2012 11:23 pm
Joined: Mon Apr 21, 2008 6:35 pm Posts: 103 Location: MASS	looking for a lightweight mt stem in 100mm any suggestions thanks
Top

Weenie	Post subject: stem Posted: Mon Jun 04, 2012 11:23 pm
Top

TheRedMantra	Post subject: Re: stem Posted: Tue Jun 05, 2012 12:17 am
Joined: Sun Oct 13, 2002 3:51 pm Posts: 229	25.4 or 31.8? Length/rise? Rotor s3x is pretty sweet. Are you on a budget?
Top

cycleforlife	Post subject: Re: stem Posted: Tue Jun 05, 2012 2:22 am
Joined: Mon Apr 21, 2008 6:35 pm Posts: 103 Location: MASS	31.8 sorry for got the info ,100 mm 0 degrees. budget is not to important prefer quality...
Top

skyshine	Post subject: Re: stem Posted: Tue Jun 05, 2012 8:19 am
Joined: Tue May 29, 2012 4:27 am Posts: 17	31.8, 100mm? i know yishun have, but i don't know quality! And i found a strange thing, the weight of alloy stem is 115g/pcs, but the weight of full carbon stem is 140g/pcs, does full carbon not lightweight than alloy one ? http://www.shop-yishunbike.com/components/stems" onclick="window.open(this.href);return false;
Top

limba	Post subject: Re: stem Posted: Tue Jun 05, 2012 4:15 pm
Joined: Tue Dec 16, 2003 4:24 am Posts: 955	Rotor, New Ultimate, Easton EC90, Ritchey, Syntace...
Top

project3	Post subject: Re: stem Posted: Wed Jun 06, 2012 3:03 am
Joined: Tue Jul 14, 2009 2:18 am Posts: 210	Kcnc
Top

xuelan	Post subject: Re: stem Posted: Wed Jun 06, 2012 8:36 am
Joined: Tue May 22, 2012 3:59 am Posts: 16	cycleforlife wrote: 31.8 sorry for got the info ,100 mm 0 degrees. It's said a 0 degree stem rise is when the protruding part of the stem that clamps to the bars is exactly at right angles to the verticle shaft of the stem?
Top

ratherbeintobago	Post subject: Re: stem Posted: Sat Jun 09, 2012 1:31 pm
Joined: Sat Apr 30, 2011 9:26 am Posts: 70 Location: The High Pennines	xuelan wrote: It's said a 0 degree stem rise is when the protruding part of the stem that clamps to the bars is exactly at right angles to the verticle shaft of the stem? Yes, that's right. Andy
Top

Zen Cyclery	Post subject: Re: stem Posted: Mon Jun 11, 2012 2:02 am
Shop Owner Joined: Tue Mar 10, 2009 5:27 am Posts: 1244 Location: McCall, ID	The Enve stems are super nice. They are respectably light and they look very clean. _________________ http://www.zencyclery.com
Top

Weenie	Post subject: Re: stem Posted: Mon Jun 11, 2012 2:02 am
Top

skyshine	Post subject: Re: stem Posted: Mon Jun 11, 2012 10:54 am
Joined: Tue May 29, 2012 4:27 am Posts: 17	“If beauty is in the eye of the beholder, the ENVE carbon stem wouldn't be out of place in the Louvre.” really like this advertisement, but Enve stems really expensive
Top

Display posts from previous: All posts1 day7 days2 weeks1 month3 months6 months1 year Sort by AuthorPost timeSubject AscendingDescending

Page 1 of 1

[ 10 posts ]