di2 internal battery connector

View unanswered posts | View active topics

Board index » Discussion » Road

di2 internal battery connector

Page 1 of 1

[ 13 posts ]

Print view

Previous topic | Next topic

Author

Message

daryl1

Post subject: di2 internal battery connector

Posted: Fri Jun 01, 2012 2:52 am

Joined: Wed Oct 01, 2008 7:00 am
Posts: 98
Location: bay area, CA

To anyone who did an internal di2 battery, what connector are you using?

I have a tenergy airsoft battery I am going to use with my build, but am a bit unsure whether I should stick with the mini tamiya connector or not. Is there a lot of concern with water entering the plug? I figure I can dab some silicone in the exposed areas and heatshrink the entire assembly after connected.

Top

drmutley

Post subject: Re: di2 internal battery connector

Posted: Fri Jun 01, 2012 8:06 am

Joined: Fri Feb 11, 2011 4:23 am
Posts: 174

just cut the shimano connector off the battery mount and splice this onto the LiPo battery.... red to red... black to black... then connect as usual.... then u dont have to worry bout compatibility issues, or waterproofness....

Top

daryl1

Post subject: Re: di2 internal battery connector

Posted: Fri Jun 01, 2012 6:24 pm

Joined: Wed Oct 01, 2008 7:00 am
Posts: 98
Location: bay area, CA

How do I charge the battery without cutting and soldering every time then? :shock:

Top

drmutley

Post subject: Re: di2 internal battery connector

Posted: Sat Jun 02, 2012 12:43 am

Joined: Fri Feb 11, 2011 4:23 am
Posts: 174

daryl1 wrote:

How do I charge the battery without cutting and soldering every time then? :shock:

On the tenergy I used, there were 2 connectors, one generic, and one for charging...
Cut the generic off and solder/heat shrink the shimano connector on... The charging connector remains to allow easy charging....

Top

markc

Post subject: Re: di2 internal battery connector

Posted: Sat Jun 02, 2012 1:41 am

Joined: Thu May 17, 2007 2:23 am
Posts: 188

Internal routing on a P3C using JST connectors on the power leads for me.

Top

daryl1

Post subject: Re: di2 internal battery connector

Posted: Sat Jun 02, 2012 4:30 am

Joined: Wed Oct 01, 2008 7:00 am
Posts: 98
Location: bay area, CA

I don't have the original di2 battery, that's probably why I was confused

Looks like I'll just stick with the mini tamiya connector and shrink wrap the connection

Top

drmutley

Post subject: Re: di2 internal battery connector

Posted: Sun Jun 03, 2012 12:18 pm

Joined: Fri Feb 11, 2011 4:23 am
Posts: 174

Not the battery, just the battery mount... It is standard with the internal wiring harness.... Just cut the mount off the harness and join the battery on at this point, leaving the charging connector in place

Top

Dammit

Post subject: Re: di2 internal battery connector

Posted: Sun Jun 03, 2012 12:30 pm

Joined: Sun Mar 27, 2011 8:16 pm
Posts: 262

http://www.amazon.co.uk/gp/product/B005 ... 05_s00_i00

Top

daryl1

Post subject: Re: di2 internal battery connector

Posted: Sun Jun 03, 2012 8:07 pm

Joined: Wed Oct 01, 2008 7:00 am
Posts: 98
Location: bay area, CA

drmutley wrote:

Ah thanks a lot, makes sense. I was a bit confused because I don't have a balance charger, just a generic lipo battery charger (2 pin setup). Gonna see if I can exchange it for a 3 pin balance charger, this seems like the cleanest solution

Top

petemilligan

Post subject: Re: di2 internal battery connector

Posted: Tue Jun 05, 2012 11:45 am

Joined: Mon Feb 27, 2012 9:58 pm
Posts: 2

Dammit wrote:

http://www.amazon.co.uk/gp/product/B005 ... 05_s00_i00" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;

Here's version two the battery. Now with 18mm carbon fibre tube & capped with resin/micro-balloon slurry. weight is down to 60g.

Top

daryl1

Post subject: Re: di2 internal battery connector

Posted: Thu Jun 07, 2012 12:23 am

Joined: Wed Oct 01, 2008 7:00 am
Posts: 98
Location: bay area, CA

Just got the internal harness in today. Lucky I ordered the harness that has an extra long wire for the seatpost battery

looks like it will fit perfectly.

Cut off the battery wire and I see there are two red two black. I'm assuming there are 2x positive/negative from the same power source, is that correct? If so it looks like all I have to do is solder the positive and negative to the battery 2 leads to one. Seems logical, just wanna be 100% sure!

Thanks for the help guys

Top

Dammit

Post subject: Re: di2 internal battery connector

Posted: Thu Jun 07, 2012 1:15 pm

Joined: Sun Mar 27, 2011 8:16 pm
Posts: 262

Version 2 looks good Pete, when can I get my hands on one?

Top

drmutley

Post subject: di2 internal battery connector

Posted: Thu Jun 07, 2012 3:07 pm

Joined: Fri Feb 11, 2011 4:23 am
Posts: 174

daryl1 wrote:

Just got the internal harness in today. Lucky I ordered the harness that has an extra long wire for the seatpost battery

Yep

Top

Page 1 of 1

[ 13 posts ]

Board index » Discussion » Road

Who is online

Users browsing this forum: Bing [Bot], martroy, petal666, tonytourist and 56 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

	Author	Replies	Views	Last post
Internal battery for Di2 ultegra DIY in Road	Kingston	1	438	Wed Feb 13, 2013 5:28 pm Cyklus
Any news on Campy EPS Internal Battery? in Road	morrisond	4	548	Tue Jan 29, 2013 5:24 am Powerful Pete
2013 Giant TCR Advanced SL internal Di2 battery in Road	torebb	1	345	Wed Apr 03, 2013 3:12 pm Horacio
Shimano 9070 internal battery harness in Road	Bely	4	466	Sun Apr 14, 2013 12:19 am thisisatest
Shimano Di2 9070 Internal Battery BTR2 in a Thomson seatpost in Road	steveorocks	9	813	Mon Apr 22, 2013 7:11 pm steveorocks