Your second bike is better than most peoples first bike.

_________________
BIG DADDY B FLOW
AERO & LIGHT is RIGHT

Cervelo SLC 5890g/12.98 lbs

I like that Masi. Do you know what it is?

_________________
- 2012 Specialized Tarmac w/ Force
- 2012 Cannondale CAAD 10-5 w/ Ultegra

Thanks. Some photographer got an awesome action shot of me in my crit race yesterday. I was suffering bad at this point.

_________________
Cervelo S2(5888g)
Cervelo P3(7850g and dropping fast)
Trek 5200(7050g)

Masi 3VC Volumetria

_________________
Cervelo S2(5888g)
Cervelo P3(7850g and dropping fast)
Trek 5200(7050g)

Nice. After seeing the setup on your bikes I always wondered what your position on the bike was.

You don't look as hunched over as I would have imagined and actually looks like a good riding position...

If only my legs were like that.

_________________
- 2012 Specialized Tarmac w/ Force
- 2012 Cannondale CAAD 10-5 w/ Ultegra

Yep, I have a very short torso, and long arms, and legs. It makes my saddle to bar drop possible, and actually comfortable.

As for the legs, I wish the right one wasn't all scared up from the BMX pedal slip up I had last fall. They always tell me things I don't want to hear as well. Stupid legs!

_________________
Cervelo S2(5888g)
Cervelo P3(7850g and dropping fast)
Trek 5200(7050g)

Is there a final build list?

_________________
Baum Ristretto, Baum Mondrian Corretto & the '89 Merckx! | "If you could eat it in one sitting, hold your line." | twitter.com/Tinea_Pedis

I suppose it is time to do that. I kinda neglected to do that since it is my B bike, it gets neglected as usual. Here it goes:

Frame: 2001 Trek 5200 56cm raw carbon clear coated
Fork: Renoylds Ouzo Aero
Headset: Extralite The Head w/ Syntace top cap, and black aluminum bolt
Stem: Syntace F119 100mm logos removed with Ti bolts
Bars: Syntace Racelite Carbon 44cm
Bartape: Fizik Microtex Glossy Black
Shifters: SRAM Force first gen
Front Derailleur: SRAM Force with red aluminum bolts
Rear Derailleur: SRAM Force with red aluminum bolts
Brakes: SRAM Force
Crankset: SRAM Force 170mm compact with black FSA 50/34 rings, and red chainring bolts
Bottom Bracket: Chris King Black
Pedals: Speedplay Zero Chromo
Seatpost: KCNC Ti ProLite 27.2
Saddle: Selle Italia SLR Kit Carbonio Flow
Seatpost Collar: Thomson
Wheels: Spinergy Stealth FCC carbon clinchers logos removed
Tires: Kenda Kaliente Pro 23mm
Skewers: Zipp Beyond Black stainless steel
Cassette: SRAM Force 11-23
Chain: KMC X10SL

Nothing real light, just normal heavy reliable everyday parts. My Spinergy Skewers snapped the other day, so I decided SS over Ti. I had a KCNC seatpost collar at one point, and it broke too, so the heavier Thomson was installed. The wheels are my training set, but those are what is usually on it. My Cervelo S2 in my sig, is much more of a WW build.

_________________
Cervelo S2(5888g)
Cervelo P3(7850g and dropping fast)
Trek 5200(7050g)

Yep, haven't missed the previous dozen mentions of it being your 'B bike'. However like some have mentioned, it's certainly good enough for a lot of people's 'A bike'.

Any chance, even though it's your B bike, of a final weight please? And the cages that you're using? They look light.

_________________
Baum Ristretto, Baum Mondrian Corretto & the '89 Merckx! | "If you could eat it in one sitting, hold your line." | twitter.com/Tinea_Pedis

Haha, yep I enjoyed it's days as my A bike too. I am pretty sure I could make it lighter than my S2 if I wanted too. The bars are 40g lighter than the Vuka Sprints on the S2, and a round post combo would be lighter than my aero combo. I've thought about making it a dedicated light climbing bike, but I think I was doing that, I would go with a lighter frame to start.

I've changed a few parts since I weighed it last, but I think it was 16.5lbs the last time I weighed it. I don't have a scale, but I'll ride it to the LBS next week and get you a definite weight on it. I knew I was forgetting something on that build list. They are "Edge" brand cages I got off of ebay. They started out at 21g I think each, and the stoppers at the bottom broke off, and then I started playing with them. I drilled holes, and removed parts of them, and got them down to 16g each. They hold Camelbak podium bottles securely, but all my Specialized bottles slip though w/o the stoppers.

_________________
Cervelo S2(5888g)
Cervelo P3(7850g and dropping fast)
Trek 5200(7050g)

Great final weight for a bike with still potential to shed more.


Very nice.

_________________
Baum Ristretto, Baum Mondrian Corretto & the '89 Merckx! | "If you could eat it in one sitting, hold your line." | twitter.com/Tinea_Pedis

Thanks. I'll get a definite weight one day this week.

_________________
Cervelo S2(5888g)
Cervelo P3(7850g and dropping fast)
Trek 5200(7050g)

Took the Trekster to the LBS today. Came in at 15.54lbs, 7050g, so lighter than I thought. This was with the Spinergy clinchers, Garmin speed/cadence sensor and computer mount too, but no computer. If I put my Zipps on it would be UCI illegal. I kinda want to get it under 7000g now. I kinda would like narrower spindles for my pedals so I might just order some Ti spindles for them. That would get me about 62g lighter.

_________________
Cervelo S2(5888g)
Cervelo P3(7850g and dropping fast)
Trek 5200(7050g)

I just stumbled into this thread. Nice job. I'll read everything later.

Lookin good

_________________
Super Sagan!