Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Fri May 06, 2016 10:55 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED

If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 19 posts ]  Go to page 1 2 Next
Author Message
PostPosted: Fri May 25, 2012 10:41 am 
Offline

Joined: Fri Nov 20, 2009 4:31 pm
Posts: 32
http://road.cc/content/news/58978-campa ... hlon-range

This was a nice surprise this morning!

I like the chainset - who else thinks that Valvpiti will debut this at the TdF?

F.


Top
   
PostPosted: Fri May 25, 2012 11:03 am 
Offline
User avatar

Joined: Sat Jun 26, 2010 11:43 am
Posts: 452
The bora chainset is awesome. Whoever designs the bullet graphics need to find a different job, they are bloody horrible.

_________________
Planet-X Nanolight HM - 5.63kg


Top
   
PostPosted: Fri May 25, 2012 11:15 am 
Offline
User avatar

Joined: Sat Jun 23, 2007 12:41 am
Posts: 1554
astranoc wrote:
The bora chainset is awesome. Whoever designs the bullet graphics need to find a different job, they are bloody horrible.


:noidea: Who care about the graphics...I'm impressed with the cranks, they look so much better than FSA etc...

_________________
"It never gets easier, you just go faster..." - Greg Lemond

"I enjoy climbing...I enjoy seeing people disappear behind me." - Robert Millar


Top
   
PostPosted: Fri May 25, 2012 1:42 pm 
Offline

Joined: Wed Jun 10, 2009 2:16 pm
Posts: 363
Location: Austin, Texas
I care about the graphics - and the bullet model could have been better, for sure.

Good:
Image

Bad:
Image

The new timetrial stuff is very interesting.

Is it just me or do the EPS bar-end shifters seem . . . bulky? I would expect an electronic component such as this to be a bit more svelte.

Image


Top
   
PostPosted: Fri May 25, 2012 2:25 pm 
Offline

Joined: Sun Apr 24, 2011 6:23 am
Posts: 643
Location: Melbourne, Australia
I quite like the look of the EPS TT kit. Bullet graphics are a bit gauche but I like the raw carbon and the fat crank arms.

natiedean24 wrote:
Is it just me or do the EPS bar-end shifters seem . . . bulky? I would expect an electronic component such as this to be a bit more svelte.

I think it only looks bulky because of the shorter lever compared to the mechanical bar end shifter.

_________________
Slam your stem.


Top
   
PostPosted: Fri May 25, 2012 3:22 pm 
Offline
User avatar

Joined: Thu Nov 10, 2005 5:31 pm
Posts: 3667
Location: Surrey B.C. Canada
I have said this before but will say it again. Graphics can be easily changed and should never really be a concern since they can be changed but the overall design well that is another story. I would love to get a pair of these for my bike if I was using Campy and I have to say this might be the reason to change. These cranks could be changed and looks so damn good with just a bit of work.

_________________
BIG DADDY B FLOW
AERO & LIGHT is RIGHT

Cervelo SLC 5960g/13.13 lbs


Top
   
PostPosted: Fri May 25, 2012 3:52 pm 
Offline
User avatar

Joined: Sat Jun 26, 2010 11:43 am
Posts: 452
True enough that you can easily change the graphics, but it lowers the resale value and secondly it will void your warranty.

_________________
Planet-X Nanolight HM - 5.63kg


Top
   
PostPosted: Fri May 25, 2012 4:14 pm 
Offline
User avatar

Joined: Thu Nov 10, 2005 5:31 pm
Posts: 3667
Location: Surrey B.C. Canada
All issues that I am not concerned with but I am not sure I agree with you on the resale value.

_________________
BIG DADDY B FLOW
AERO & LIGHT is RIGHT

Cervelo SLC 5960g/13.13 lbs


Top
   
PostPosted: Fri May 25, 2012 7:12 pm 
Offline
User avatar

Joined: Sat Dec 06, 2008 10:14 am
Posts: 1023
Location: Sweden
Excuse my language, but OMFG(!) on the crankset! So glad I'm building a TT bike this coming winter and havent't got a crankset picked out yet, cause this is the one!

_________________

The Shivenge


Top
   
PostPosted: Fri May 25, 2012 7:27 pm 
Offline

Joined: Thu Dec 01, 2011 4:59 pm
Posts: 58
I'm personally a huge fan of campag stuff but this just looks wrong, its hideous. What does everyone find so appealing ??

Also whats the differece between bora and ultra chain set other than the ultra showing a little more chain ring ? (is it less/more aero that way ?)


Top
   
PostPosted: Fri May 25, 2012 8:48 pm 
Offline

Joined: Tue Jan 10, 2012 8:10 pm
Posts: 65
Location: Up north
weeshuggy wrote:
Also whats the differece between bora and ultra chain set other than the ultra showing a little more chain ring ? (is it less/more aero that way ?)


Bullet cranks are aimed for Tri - they weigh more, don't have very big rings (55+) and probably cost less. Probably don't have titan spindle while Bora version has?

The graphics on Bullets do look ugly - looks like they hired the same blind designer who did Colnago frames in 90's :)

_________________
'14 Parlee Z1 (Super Record, Enve, AX-Lightness, Bora etc.)
... and many others.


Last edited by llhh on Fri May 25, 2012 8:56 pm, edited 3 times in total.

Top
   
PostPosted: Sat May 26, 2012 2:32 am 
Offline
Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1980
Location: NoVA/DC
bullet cranks also get the PowerTorque connection, bora cranks get UltraTorque. ti axle.
i think it's the second coming of the VumaChrono, and i like it!


Top
   
PostPosted: Sat May 26, 2012 3:11 am 
Offline
User avatar

Joined: Sat Jun 23, 2007 12:41 am
Posts: 1554
I think they look better fitted...

Image

_________________
"It never gets easier, you just go faster..." - Greg Lemond

"I enjoy climbing...I enjoy seeing people disappear behind me." - Robert Millar


Top
   
PostPosted: Sat May 26, 2012 5:19 am 
Offline

Joined: Sat Aug 27, 2011 3:26 am
Posts: 395
Location: Sydney, Australia
I think its pretty pathetic that they would resort to putting power torque on the cheaper one just for the sake of differentiation. The cost of the tools required to work on the cheaper crankset eats into the price difference.

Dont get me wrong, i like the bora cranks. Its just frustrating to see such blatant use of an inferior system to induce people to buy the more expensive option.


Top
   
PostPosted: Sat May 26, 2012 6:11 am 
Offline

Joined: Sun Apr 24, 2011 6:23 am
Posts: 643
Location: Melbourne, Australia
jsinclair wrote:
I think its pretty pathetic that they would resort to putting power torque on the cheaper one just for the sake of differentiation. The cost of the tools required to work on the cheaper crankset eats into the price difference.

Dont get me wrong, i like the bora cranks. Its just frustrating to see such blatant use of an inferior system to induce people to buy the more expensive option.

Well, there are always the standard Campagnolo cranks...

_________________
Slam your stem.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 19 posts ]  Go to page 1 2 Next

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Campagnolo 2015 chainset combos

[ Go to page: 1 2 ]

in Road

0w3n

17

1765

Mon Jun 22, 2015 2:07 pm

graeme_f_k View the latest post

There are no new unread posts for this topic. Attachment(s) Campagnolo Record 10 Speed Ultra Torque Chainset

[ Go to page: 1 2 3 4 ]

in Road

cmcdonnell

50

1153

Fri Feb 12, 2016 2:41 am

Tenlegs View the latest post

There are no new unread posts for this topic. Ultegra 6800 chainset with Campagnolo shifters and mech

in Road

solarider

14

1026

Tue Nov 24, 2015 11:22 pm

sawyer View the latest post

There are no new unread posts for this topic. aero handlebars vs aero wheels vs aero frame

in Road

spectastic

7

832

Mon Mar 28, 2016 3:34 pm

RyanH View the latest post

There are no new unread posts for this topic. Aero+ Caliper Brakes VS Non Aero + Disc Brake Road Bikes

in Road

Jmdesignz2

7

804

Wed Oct 14, 2015 11:35 pm

BeeSeeBee View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Baidu [Spider], Bing [Bot], chrisdrewery, KCookie, MSNbot Media and 22 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited