How is a square tapered(JIS)BB spindloe length measured?

cyclemanpat · **Posted:** Wed Feb 25, 2004 3:16 am

that's why I asked about spindle lengths......I am having trouble finding the right length for my BB to work perfect with my CAT cranks. I had a 110mm BB and it was a bit too long, so I am going to try an Action-Tec 107mm BB, should work. Complete bike with the Action-Tec BB(141 grams) and CAT cranks should be around 12.2 lbs!!! Can't wait, I will post pics then

:-) · **Joined:** Thu Nov 06, 2003 9:37 pm **Posts:** 79

Florian wrote:

:-) wrote:

you may aswell delete the post.... talk about poor moderating!

I just found this on the net:

Quote:

Rule #1 for moderating:
The moderator is always right. Even if the moderator says that he/she is wrong, the moderator is still right.

we use those rules on the forum i moderate :lol:

& i also think the :roll:

emoticon basically translates too *how stupid are you!!*

:shock:

maybe im wrong

Weenie · **Posted:** Wed Feb 25, 2004 5:45 am

:-) · **Joined:** Thu Nov 06, 2003 9:37 pm **Posts:** 79

cyclemanpat wrote:

that's why I asked about spindle lengths......I am having trouble finding the right length for my BB to work perfect with my CAT cranks. I had a 110mm BB and it was a bit too long, so I am going to try an Action-Tec 107mm BB, should work. Complete bike with the Action-Tec BB(141 grams) and CAT cranks should be around 12.2 lbs!!! Can't wait, I will post pics then

that sounds a bit hit & miss to me, its also only 1.5 mm shorter each side... which if the 110mm is visually too long then you may need even shorter than 107mm

there is a bit on chainline here http://www.sheldonbrown.com/gloss_ca-m.html#chainline

cadence90 · **Joined:** Sun Dec 14, 2003 1:52 am **Posts:** 1610

How to find spindle length:
"I have "x" cranks which I want to mount on a "y" frame with "z" type(s) of bottom bracket(s): what is the advised spindle length for this setup?"

How to use emoticons:
"I'm when you and I'm when we argue. I'm , and that you act so sometimes, but I'm and when you me. I'm when I'm , but that doesn't mean you need to be or . Sometimes is a . If I have a or an I WeightWeenies Forum. If you're not don't be , just post
!!!"

http://www.amazon.com/gp/reader/020530902X/ref=sib_dp_pt/102-3804769-7766567#reader-link

cyclemanpat · **Posted:** Wed Feb 25, 2004 3:31 pm

Cadence........not sure if that mess was directed to me, if it was not sure what you were saying?

cadence90 · **Joined:** Sun Dec 14, 2003 1:52 am **Posts:** 1610

No Cyclemanpat, it was not directed at you specifically at all...it was a joke in general re: the way people seem to comment so much on other's wording, etc. instead of just answering the questions posed. And then things go way OT, but I'm guilty of it too sometimes....Sorry if you took offence....

Florian · **Posted:** Wed Feb 25, 2004 4:58 pm

Since the original question has been answered, I'll close this topic.

	Author	Replies	Views	Last post
Enve Tapered Fork on GIANT TCR in Road	brian51574	3	866	Sat Jan 04, 2014 10:15 pm barsook77
Wanted: Tapered Integraded Headset under $50 FOUND in Road	RiverCityKid	1	170	Fri Jan 24, 2014 3:04 am Valbrona
Servicing Square taper BB bearings (Token Tiramic) in Road	Grimpeur	1	223	Mon Nov 04, 2013 11:02 pm eric
What is the spindle length for Vector? in Road	Causidicus	1	251	Mon Oct 28, 2013 12:30 pm jockalldrick
New chain length difference in Road	pdlpsher1	2	415	Tue Sep 10, 2013 3:38 am pdlpsher1

How is a square tapered(JIS)BB spindloe length measured?

Who is online