Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Mon May 02, 2016 12:23 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED

If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 11 posts ] 
Author Message
PostPosted: Mon May 07, 2012 12:49 am 
Offline

Joined: Wed Dec 07, 2011 1:26 am
Posts: 414
Location: California's country side
does anyone know anything about the Zipps with powertap, I think it is built by a company called handspun, and they use DT aerolite spokes.
Not sure if I should go with it or use wheelbuilder.com, wheelbuilder about $400 more for me. I don't think the handspun one is going to fall apart though?

On the Zipp website they are no longer listed and they just redirect you to wheelbuilder.com.. so does anyone have experience with wheels made by handspun.


Top
   
PostPosted: Mon May 07, 2012 1:14 am 
Offline

Joined: Thu Dec 09, 2004 1:57 pm
Posts: 245
I bought the powertap closeout deal Competitive Cyclist was running a few months ago. 32 spoke PT built up with Open Pro rim built by Handspun.

The wheel went badly out of true the first ride. I trued it so I could ride and it happened again (and again, every ride). Finally after the 5th ride, I took it to my shop. We noticed that Handspun had used a variety of different length spokes (per side). Maybe this is why it was a closeout? In the end I had it rebuilt with new spokes (the proper length, haha!) and it has worked fine, but I don't think the Handspun build was very good. Personally I won't be buying wheels built by them anytime soon, but maybe someone else has a better experience?

I also have a rear wheel built by wheelbuilder.com, 4 years ago that has only needed minor truing with close to 12,000 miles on it. Go with wheelbuilder.com.


Top
   
PostPosted: Mon May 07, 2012 2:15 am 
Offline

Joined: Wed Dec 07, 2011 1:26 am
Posts: 414
Location: California's country side
scary story, I wonder if they use the same crew to build the more expensive wheels, we are talking about $1600-$2000. If I take it to a shop to have them check the tension would it be that bad?


Top
   
PostPosted: Mon May 07, 2012 4:47 am 
Offline

Joined: Sat Oct 10, 2009 7:13 am
Posts: 964
Location: 93306
My wheelset on my road bike was built up by Wheelbuilder.com, I've had them right at three years and thousands of trouble free miles. I had a slight wobble last year and I took them to my lbs for a true and snapped a spoke on the next ride. I sent them back to wheelbuilder for a spoke replacement and true and all has been fine since. Highly recommended!


Top
   
PostPosted: Mon May 07, 2012 6:42 am 
Offline

Joined: Sun Mar 27, 2011 10:01 pm
Posts: 96
I have a Zipp 808 PT that was built by handspun with DT Aerolites. After about 100 miles it was massively out of true (it happened slowly, but I didn't fix it as I mainly rode TTs). Took it to my LBS and it's been true ever since, so I guess it was handspun doing a bad job? No sign of different length spokes though.


Top
   
PostPosted: Mon May 07, 2012 6:50 am 
Offline

Joined: Wed Dec 07, 2011 1:26 am
Posts: 414
Location: California's country side
If I have a shop check the work and tension before I ride will it be OK? We are talking about 20 spokes.. shouldn't be too bad to get this right.

I like what I see at wheelbuilder, but it goes for over $350 more and I cannot justify that cost.


Top
   
PostPosted: Mon May 07, 2012 2:37 pm 
Offline

Joined: Thu Dec 09, 2004 1:57 pm
Posts: 245
My advice, if you choose to take it is, buy the best and cry once. Go with Wheelbuilder.com You won't have to worry about whether or not you'll have any problems, you won't.


Top
   
PostPosted: Mon May 07, 2012 4:04 pm 
Offline

Joined: Sat Jun 06, 2009 7:28 am
Posts: 480
Get a powertap wheel built into something that you can actually use all the time. Better yet, get a crank-based power meter. You only get the full benefits of power based training if you do it all the time, and can measure TSS, among other things.

Spend the money on a crank based system.


Top
   
PostPosted: Mon May 07, 2012 4:22 pm 
Offline

Joined: Wed Dec 07, 2011 1:26 am
Posts: 414
Location: California's country side
true with wheelbuilder I can get a 24 spoke zipp which can't be bought else where. Thinking of the 101 though so it's a ride everywhere wheel.


Top
   
PostPosted: Tue May 08, 2012 4:06 am 
Offline

Joined: Wed Jun 09, 2010 4:23 am
Posts: 18
Wheelbuilder .com all the way. You get what you pay for and the guys at WB know their craft inside and out. They stand behind their service 100% and the quality of their lacing and quality control is second to none. I've bought an Enve 45 and Zipp 404 FC wheelsets from them and I'm actually getting ready to purchase a third. If you're a repeat customer, they will even give you a discount.

_________________
2010 Pinarello Dogma 60.1


Top
   
PostPosted: Tue May 08, 2012 4:17 am 
Offline

Joined: Thu Sep 29, 2011 1:19 am
Posts: 102
Handspun = Quality Bicycle Products in house brand. Would not hesitate one bit to have them build a wheel.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 11 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Garmin Bike Computer with multiple Powertap Wheels

in Road

SgtRock

4

341

Wed Jul 01, 2015 1:17 am

pdlpsher1 View the latest post

There are no new unread posts for this topic. Zipp 303 or 404 for Do-it-All Wheels

[ Go to page: 1 2 3 ]

in Road

ryanw

44

1807

Sun Apr 24, 2016 2:53 am

eric01 View the latest post

There are no new unread posts for this topic. advice on some wheels : Zipp 202 versus Ksyrium SL

in Road

altdrumz

6

661

Wed Mar 16, 2016 3:15 am

Wookski View the latest post

There are no new unread posts for this topic. Ceramic bearings for Zipp Wheels Worth Doing? Best Source?

in Road

Jmdesignz2

6

817

Mon Jul 06, 2015 10:19 am

davidalone View the latest post

There are no new unread posts for this topic. Which Logo & Brand? Help!

in Road

ridebikereadbook

3

514

Thu Jul 23, 2015 6:01 pm

jano View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: ho9, Narrowbars, pyrahna, shk1 and 32 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited