Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Thu Dec 14, 2017 11:35 pm

All times are UTC+01:00





Post new topic  Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Mon May 07, 2012 4:50 pm 
Offline

Joined: Tue Apr 12, 2011 8:08 am
Posts: 2292
Location: Pedal Square
I took apart a bike and found the Ultegra rear mech upper cog to have lateral play of about 3-5mm. The bike was in quite regular use for a few years. Is that play normal, or should I be looking out to replace parts? Thanks.

_________________
Bikes: Raw Ti, 650b flatbar CX


Top
   
Posted: Mon May 07, 2012 4:50 pm 


Top
   
 
PostPosted: Mon May 07, 2012 5:41 pm 
Offline

Joined: Sat May 07, 2011 12:23 am
Posts: 188
Yes this is normal. The pulley is designed to have some lateral movement to negate any small misalignment between the cassette and derailleur. Unless there is damage to the bushing/bearing, or wear to the pulley teeth, you can probably re-use it.


Top
   
PostPosted: Mon May 07, 2012 7:14 pm 
Offline

Joined: Tue Apr 12, 2011 8:08 am
Posts: 2292
Location: Pedal Square
Thanks. Interestingly the Tiso pulleys I have checked against on another, unused RD don't have any play.

_________________
Bikes: Raw Ti, 650b flatbar CX


Top
   
PostPosted: Tue May 08, 2012 3:54 am 
Offline
Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1980
Location: NoVA/DC
that's what makes tiso, and most other aftermarket pulleys, inferior. best upper pulley is dura ace. ball bearings AND floating.


Top
   
PostPosted: Tue May 08, 2012 12:21 pm 
Offline

Joined: Sat Jul 29, 2006 2:36 am
Posts: 1353
Location: UK
Isn't 3-5mm play a bit excessive? I thought about 1mm was the norm for Shimano?


Top
   
PostPosted: Tue May 08, 2012 12:57 pm 
Offline
in the industry
User avatar

Joined: Wed Jan 19, 2011 11:14 am
Posts: 1772
Location: SYD
5mm is way to much... 1mm total is ok.. I say it's new pully time..
I just replaced a set of DA pullys on a friends bike that had that kinda play with some spare ( second hand ) extralite pullys I had... It didn't shift so well before now it's like butter....

_________________
Skunkworks Bikes


Top
   
PostPosted: Wed May 09, 2012 3:15 am 
Offline
Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1980
Location: NoVA/DC
im assuming the measurements given are exaggerated. if the play is purely lateral, it's fine. if the play allows the pulley to "roll" (top goes left, bottom goes right), then it needs to be replaced.


Top
   
Posted: Wed May 09, 2012 3:15 am 


Top
   
 
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 7 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Attachment(s) Mid-length mech cage for DA9070 rear mech?

[ Go to page: 1 2 ]

in Road

TheDarkInstall

18

1357

Wed Jul 05, 2017 7:34 pm

LeviR View the latest post

There are no new unread posts for this topic. Ciamillo rear brake servicing - removing excess play

in Road

Slimtim

7

1005

Wed Dec 21, 2016 4:08 pm

Slimtim View the latest post

There are no new unread posts for this topic. Campag SR rear mech

in Road

Timujin

8

1011

Fri Apr 28, 2017 8:40 pm

mattr View the latest post

There are no new unread posts for this topic. eTap rear mech Issues??

in Road

Adamchinnyb

2

406

Mon Jul 17, 2017 4:27 pm

sungod View the latest post

There are no new unread posts for this topic. Di2 Rear Mech | 9070 to 9150.

in Road

p3dalfaster

2

568

Wed Jul 05, 2017 7:29 pm

LeviR View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Baidu [Spider], Chris3g, jbattermann, maquisard, TobinHatesYou, yltman and 40 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited