This is my updated timetrial bike for this spring. I replaced my old cannondale slice alu frame with this one and also a new crankset and a 3T bar. I only struggled with the cable routing, when the snow is gone I am going to testride it to see if everything fits.

Most excellent! I haven't seen many Merida although I'm really liking what I see. Are those your tt wheels or trainers for the bike?

_________________
-For my next trick I will set myself on fire!
-This board and the world in general would be a much nicer place if everyone could just take themselves a little less seriously.
-Sticky Fingers John Rockefeller
-First one over the cliff wins!

these are my TT wheels for four years. I wand a closed rear wheel but I don`t like the feel of the wind blowing against it.

This is the first TT Merida in the forum I guess.
Very nice.

Im not the most expert one, but isnt the front derailleur cable doing a wrong route on the steer tube?

_________________
ciclismo-espresso.com

I`ve tried several cable routings but none of them works maybe because it is not a complete intergrated TT bar. I wanted the cable routing trough the bar to my shifter. If i change my shiftcables to front right and rear left the routing is better but then it is difficult to remember witch shifts what.
And I am going to try this setup first on the road then all is differend. after that I make a deccision.

WOW.

That is stunning!

_________________
http://www.hackracer.com/

After some paint cracks and 6 months of waiting for a warranty frame,
Merida gave me a Black Night 2011 including top tube cable routing.
The frame was well equipped with a piece of foam to put around the top tube for clamping in a workstand
an 2 spacers to increase the headtube, two trp brakes, adjustable seatpost.
I`ve got a DT swiss rrc1300 disk wheel in order and will post a pic with that also.

holy molly! Black is outstanding...it needs disc rear wheel

_________________
http://kavitec.blogspot.com/

click this! http://www.youtube.com/watch?v=jqfFdCWAH5I&list=UUEtgd6K9EDGmoSE2YYipQgQ&index=20

Updated my TT bike with:
Front wheel DT DICUT 66 clincher 742g
Rear wheel DT RRC 1300 disk clincher
Pulley`s carbon ceramic
Bottombracket full ceramic
Chainring FSA TT 53t
Tires specialized turbo s-works 21mm

It appears the bottom of the down tube extends low enough to push the wind away from the bottom mounted brake, is this correct/

BTW Very nice replacement!

_________________
-For my next trick I will set myself on fire!
-This board and the world in general would be a much nicer place if everyone could just take themselves a little less seriously.
-Sticky Fingers John Rockefeller
-First one over the cliff wins!

Yes that is correct and there the brake cable comes out too.
I,m currently awaiting on the Continental TT LTD tires.

New toy arrived: Zipp vuka stealth small. Assembly next weekend.

Upgrades:
Zipp Vuka Stealth
Zipp Vuka straight extensions carbon
FSA TT 42t alu chainring
Prologo CPC Zero TT Nack
No quickrelease for the wheels just hexa bolts.
Better cable routing

Specialized Fuelbox fitted on my Merida

looks very nice