Race Plate Holder

Discuss light weight issues concerning road bikes & parts.
Post Reply
surlaplaque
Posts: 10
Joined: Thu Oct 27, 2011 4:00 pm

by surlaplaque

Hey yall,

how do you put your race number on your bike? This forum probably has nice solutions with the DIY happening.

Pics please!!!!!

by Weenie


bones
Posts: 414
Joined: Sun Aug 23, 2009 10:38 am

by bones

LOL! Race plate?! Listen buddy. If you are good enough to have a race number that attaches to your frame, then you let your team mechanic do it.

User avatar
STARNUT
Posts: 3424
Joined: Sun Jun 19, 2005 6:43 am
Location: Hilly, Hot, and Windy

by STARNUT

I've seen it done with pannier mount hardware behind the rear brake.

Bones, you've been on a tear lately between here and the conspiracy theories in the BB30 frame thread. I know of several large local crit series that assign rider numbers for the series. Seen several guys with a small little number attached in such a way as I described above.

Starnut
"Don't pedal harder, pedal faster!"
Q-FACTOR IS A RED HERRING

BB30.COM

racermech
Posts: 214
Joined: Sun Aug 30, 2009 7:31 pm

by racermech

I made a very simple one that mounted behind the brake caliper. I took a thin strip of aluminum I found at work. Maybe 1/8" thick about 1/2" wide. I took a torch heated it up a little bit and twisted it 90 degrees. Drilled a hole in the top and bottom. Bottom was for the brake bolt, top hole was for a 5mm bolt and a wing nut. Bent it just a little bit to clear the frame.

I could of trimmed it down a little bit to save a few grams. Later on after this pic I did grind down the mount area just a little bit. I had a few threads of engagement, but I want just a little more.

Image

User avatar
carbon2329
Posts: 852
Joined: Thu Aug 21, 2008 1:13 am
Location: Utah

by carbon2329

http://predatorcycling.com/product/razorback/

This is what I use. It's been good so far.

Geoff
Posts: 5013
Joined: Sat Dec 13, 2003 2:25 am
Location: Canada

by Geoff

Most of the World Tour bikes in my collection in the last few seasons that do not have a 'brazen-on fitting' for the number plate under the front of the toptube have a fabricated part similar to the one that racermech has made. Team Highroad made a really neat, tiny carbon thing a few seasons back just for the hell of it...

User avatar
DMF
Posts: 1062
Joined: Sat Dec 06, 2008 10:14 am
Location: Sweden

by DMF

BBB just came out with a new one that attaches to your seatpost with large o-rings, kind of like a computer mount, that looks really nice. Haven't got time to find a pic, but do a search or look up their website. Easily the cleanest looking solution IMO.

User avatar
btompkins0112
Posts: 2693
Joined: Fri Feb 11, 2011 3:04 am
Location: Mississippi

by btompkins0112

carbon2329 wrote:http://predatorcycling.com/product/razorback/" onclick="window.open(this.href);return false;

This is what I use. It's been good so far.


An it even "improves aerodynamics"!!! :smartass:

Really nice looking actually. :beerchug: :thumbup:

artray
Posts: 1365
Joined: Fri Oct 07, 2011 2:08 pm

by artray

Pipe cleaner , no screws, minimum weight .

by Weenie


DartanianX
Posts: 490
Joined: Sun Nov 13, 2011 6:00 am

by DartanianX

I saw a really nice one at a race in belg last weekend. Used the rotating thread insert that the bolt threads into on a seat post clamp and was made from replacing the insert with a longer custom made one that extended down and bent backwards with a hole drilled in the end for a bolt to go through to attach the number onto. I'll get a picture if I see one again. Would do it on my BMC SLR01 but the bolt is on the front of the seat post not the rear.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post