fixed pic links. photobucket sucks.

_________________
Neo Cycles

Exile Plus, Exile Ultimate and the new Exile II are all made by Carbotec

_________________
Neo Cycles

I called Enve and a guy that answered told me that they have had a ton a requests from builders asking for a carbon road fork with disc tabs because their customers are asking for it instead of the cyclocross disc fork.

I somehow doubt that cross riders will be using those disc 4-spoke wheels.

_________________
Norwood & Adelaide Uni CC

Who's bike is that supposed to be? Certainly not one of Hoogerland's 2011 TdF bikes, he's 5 ft 10 in (1.79 m). Here's his actual KOM bike...

_________________
And if I ever meet an aardvark, I'm going to step on its damn protruding nasal implement until it couldn't suck up an insect if its life depended on it.

yeah, the disc world is happening, slowly.

There's a few forks on the go - 3T, Enve

and some disc frames (mainly CX) - Dedaccia

but only two proper road frames that I know of - Volagi and Colnago. Volagi's are available for sale, not sure about the Colnago, and Volagi should be applauded for getting something to market, even though it's not my cup of tea design-wise.

My point was that this is an OPPORTUNITY for smaller/newer manufacturers (or at least designers/stickerers?) to become known in the marketplace by creating something new and funky. Instead they all seem to want to do the same old same old curvy tubed carbon frames.... [insert fast asleep smiley here]

The beauty of bikes is that new designs can come in relatively quickly and change the landscape - think of all the developments over the years - STI, clipless pedals, aheadsets, carbon, tubeless, discs etc. Okay, the thick-headed riders take a decade to get their heads round half the stuff but all we need is some decent disc-brake road frames and rim brakes and non-disc wheels could be on the way out......

I've already gone hydro discs on my commuter and it really is significantly better than rim brakes. Now we just need some decent roadie frames.

Bricks were shat.

It's depressing how brazen companies like Malak are about ripping off Pinarello.

Thanks for the pictures! But could you turn off the date stamp please?

Actually, Pinarello did not create the curvy stays / fork so they do not own the rights to that.

There are some other disc road frames out there, ex: Salsa, Raleigh, Kona, but these are more touring type of road bikes. I agree that there should be more pure road bikes with disc brakes. I think the big holdup is getting a true carbon road disc fork, not a cyclocross or touring fork. Rumors are that Enve and possibly Easton are working on a carbon road fork with disc tabs.

Come on. The Malak looks as much a rip-off as any Chinarello. They've copied pretty much every curve and bump!:

To me, it looks similar, but not exactly the same, but I can see how people might mistake it for a Pinarello. After all, the Pinarello is distinctively ugly.

I hope they've built the McLaren bike better than the stand.

Really, really poor design by Wilier on the drive-side chainstay cable exit point of the rear shift cable. The exit point should be at the top or back of the chainstay, not below it. Look at it. The cable interferes with fast wheel changes. This would have been avoided if Wilier did the exit point at the top or back of the chainstay like they did on their other carbon road frame. Just stupid.

May I ask where the Hyper is/was made?

_________________
Exp001