Integrate - Shimano XTR Race Brake M985
Moderator: Moderator Team
-
- Posts: 3
- Joined: Sun Apr 29, 2012 10:50 pm
Very solid brakes, but not as powerful as my R1's. I have a set of these on my Santa Cruz TRc and want to integrate the shifter and brake like on my XX's. Anyone seen any hardware to do this?
What shifters are you using? If XTR then you need SM-SL98-A
http://techdocs.shimano.com/media/techdocs/content/cycle/EV/bikecomponents/SL/EV-SL-M980-A-3310_v1_m56577569830799993.pdf
http://techdocs.shimano.com/media/techdocs/content/cycle/EV/bikecomponents/SL/EV-SL-M980-A-3310_v1_m56577569830799993.pdf
-
- Posts: 3
- Joined: Sun Apr 29, 2012 10:50 pm
crohnsy wrote:What shifters are you using? If XTR then you need SM-SL98-A
http://techdocs.shimano.com/media/techdocs/content/cycle/EV/bikecomponents/SL/EV-SL-M980-A-3310_v1_m56577569830799993.pdf
I am using both Shimano XTR Race Brake M985 and XTR shifters. From that document, I don't see where the shifters integrate with the brakes using only a single mount?
-
- Posts: 80
- Joined: Tue Sep 16, 2008 11:20 pm
- Location: Burbank, CA
R2.5 / R3 / S-Works 29er (20 lbs) / S-Works SL4 Di2 (14.7 lbs)
CerveloMikey wrote:You need these iSpec brackets...
http://www.pricepoint.com/detail/22758- ... s-Pair.htm" onclick="window.open(this.href);return false;
Just like I told him.
These brackets attach directly to the brake clamp
-
- Posts: 80
- Joined: Tue Sep 16, 2008 11:20 pm
- Location: Burbank, CA
crohnsy wrote:CerveloMikey wrote:You need these iSpec brackets...
http://www.pricepoint.com/detail/22758- ... s-Pair.htm" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;
Just like I told him.
These brackets attach directly to the brake clamp
Yeah what he said... Look at the center box on the tech doc. Item number 7 is the bolt and nutsert that slips into the brake lever mounting band/clamp. Swap out the top of the shifter, remove the brake lever mounting bolt, push the safety button and swing the clamp open, put the nutsert in the band, close the clamp, tighten the brake lever clamp then attach the shifter to the clamp and tighten.
R2.5 / R3 / S-Works 29er (20 lbs) / S-Works SL4 Di2 (14.7 lbs)
-
- Posts: 3
- Joined: Sun Apr 29, 2012 10:50 pm
I see it now, thanks everyone! $82 is a lot of dough for 10mm of extra handlebar space!
-
- Posts: 80
- Joined: Tue Sep 16, 2008 11:20 pm
- Location: Burbank, CA
lowpsihighspeed2 wrote:I see it now, thanks everyone! $82 is a lot of dough for 10mm of extra handlebar space!
I got mine here... $65
http://www.chainreactioncycles.com/Mode ... elID=54860
R2.5 / R3 / S-Works 29er (20 lbs) / S-Works SL4 Di2 (14.7 lbs)
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1 Replies
- 338 Views
-
Last post by bm0p700f
Sun Oct 08, 2017 10:06 pm
-
- 4 Replies
- 771 Views
-
Last post by CallumRD1
Wed Jun 14, 2017 1:25 am
-
-
SHIMANO 9100 VS 8000 SPECIALLY RIM BRAKE AND CRANK SET
by apricotwalnut » Sun Feb 18, 2018 4:15 pm » in Road - 7 Replies
- 585 Views
-
Last post by moyboy
Fri Feb 23, 2018 4:02 pm
-
-
- 4 Replies
- 387 Views
-
Last post by JayUK
Mon Oct 30, 2017 4:04 pm
-
- 3 Replies
- 685 Views
-
Last post by sanrensho
Wed Oct 11, 2017 12:24 am