Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Sun May 01, 2016 12:07 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed
- Tapatalk connection is currently broken

Those bugs will be fixed ASAP (next few days) as they are unfortunately more serious than expected.

If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 8 posts ] 
Author Message
 Post subject: ENVE Seatpost cap
PostPosted: Tue Apr 17, 2012 2:50 am 
Offline

Joined: Tue Apr 17, 2012 2:45 am
Posts: 1
I am building a ISP cappy using enve seatpost hardware. Can someone with and enve seatpost measure the ID of the hole the clamping hardware sits in and its width? Enve sold me the hardware but didnt tell me the dimensions.
Thanks


Top
   
 Post subject: Re: ENVE Seatpost cap
PostPosted: Fri Oct 10, 2014 6:15 am 
Offline

Joined: Fri Jan 07, 2011 6:58 am
Posts: 1151
Location: 604
Bump because I have the same question! Anyone?


Top
   
 Post subject: Re: ENVE Seatpost cap
PostPosted: Fri Oct 10, 2014 2:28 pm 
Offline

Joined: Mon Aug 30, 2010 10:18 pm
Posts: 45
It's around 32mm (1.25") wide and the ID is around 30.5mm. Would get a better measurement if I could find my calipers...


Top
   
 Post subject: Re: ENVE Seatpost cap
PostPosted: Fri Oct 10, 2014 3:12 pm 
Offline

Joined: Wed Jan 10, 2007 10:56 pm
Posts: 1114
Location: Canada
I used my calipers. Did not remove the insert, but measured its outside diameter in a couple of places (which should equal the ID of the hole). It was 31.04 mm one way, 31.06 the other way. I would guess its 31 mm.


Top
   
 Post subject: Re: ENVE Seatpost cap
PostPosted: Fri Oct 10, 2014 3:57 pm 
Offline

Joined: Fri Jan 07, 2011 6:58 am
Posts: 1151
Location: 604
Thanks so much for the help guys!

I realized that I also need to know not just the diameter but also the width of the hole (from one side to the other) too in order to get the correct tube length. Would really appreciate if someone could post that.

:beerchug:


Top
   
 Post subject: Re: ENVE Seatpost cap
PostPosted: Fri Oct 10, 2014 4:16 pm 
Offline

Joined: Mon Aug 30, 2010 10:18 pm
Posts: 45
Width is 32mm/1.25"


Top
   
 Post subject: Re: ENVE Seatpost cap
PostPosted: Fri Oct 10, 2014 6:13 pm 
Offline

Joined: Wed Jan 10, 2007 10:56 pm
Posts: 1114
Location: Canada
I measured 31.7 mm using micrometer in two places.


Top
   
 Post subject: Re: ENVE Seatpost cap
PostPosted: Sat Oct 11, 2014 1:24 am 
Offline

Joined: Mon Aug 30, 2010 10:18 pm
Posts: 45
goodboyr wrote:
I used my calipers. Did not remove the insert, but measured its outside diameter in a couple of places (which should equal the ID of the hole). It was 31.04 mm one way, 31.06 the other way. I would guess its 31 mm.


The clamp OD is bulged at the ends where you may have been measuring...curious what the actual ID is. A 30.9mm seatpost will not fit inside the hole.

I need to buy some calipers.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 8 posts ] 

All times are UTC+01:00


Who is online

Users browsing this forum: Bing [Bot], Exabot [Bot], Google [Bot] and 32 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited