Tillquist's kitchen!

Discuss light weight issues concerning road bikes & parts.
Posts: 383
Joined: Thu Feb 03, 2011 2:28 pm

by Privateer

i'll take two.

Any idea of price and when it might be available?

by Weenie

User avatar
Posts: 304
Joined: Sat Oct 23, 2004 6:42 pm
Location: Stockholm,Sweden

by skogling

Is it ready yet ? ;)

Posts: 13
Joined: Tue Mar 09, 2010 10:20 pm

by bolizous

I think he is just teasing us. :)

Posts: 38
Joined: Sun Aug 27, 2006 2:58 am
Location: SF, CA

by A C

Beautiful! :thumbup:

I'd like one in silver and one in black when you start making them please.

Let us know.

Colnago Zabel Master - Parlee Z5 - Cannondale Tandem - Ibis Mojo - Civia Loring w/wood fenders

User avatar
Posts: 422
Joined: Tue Apr 10, 2007 7:38 pm
Location: Sweden

by Fuchspk

:thumbup: looks really nice

User avatar
Posts: 963
Joined: Sat Feb 18, 2012 11:49 pm
Location: Netherlands

by Liggero

I love this mount. it's even better than bar fly and quark... pity I use syntace f109 stem and not gonna change it... could you produce a version for the syntace? i measure the bolt separation and it's about 26,5-27mm. Also with the f109 you have no space for a horizontal plate over the stem clamp, just vertical space downwards. Don't know if i explained this clear but i think you get it and you could modify the model easily to machine one for the f109. Looking forward to it. You could have a very nice business with these accessories. Sign me up for a few ones.
Happy Trails !!!

Posts: 5
Joined: Mon Apr 27, 2009 9:12 pm

by njroadie

The handlebar computer mount is great. Might I make 2 suggestions to improve the design to make it more universal?

1. Have it mount on 1 bolt instead of 2. That way, it should fit on any stem with a standard bolt. The challenge would be to make it tight enough to discourage twisting while not damaging the handlebars. Perhaps a rubber washer like that on a locknut would help?

2. Have a break in the middle of the mount with a serrated section and through bolt. The purpose would be to allow a variation of the angle relative to the stem to allow different stem angles to be used.

I'll bet with these "universal" type modifications you could sell a ton of these.

Posts: 293
Joined: Wed Jun 09, 2010 10:44 am

by WeightySteve

Why mount it to the stem at all? Fit it directly on fork, like a spacer, under the stem.

Edit: Stupid idea, the "arm" would need to be as long as the stem + computer (15cm+). Too long.

User avatar
Posts: 1486
Joined: Thu Feb 26, 2004 7:35 pm
Location: Middle of nowhere, EU

by mrowkoob

Great design Tillquist, chapeau!
The unbearable wallet lightness of being a weightweenie

Posts: 443
Joined: Sun Mar 27, 2011 8:16 pm

by Dammit

How about a curved section that follows the arc of the bar, and the underside of the stem face plate as one half of the mount?

i.e. in a similar fashion to a shim, it would fit underneath the stem face plate, and be clamped between it and the bars.

The "USS Enterprise" section would then mount to that, and as it would be a curved piece one could adjust the angle relative to the ground by simply moving it up or down, then clamping it in place.

It would mount to any stem, irrespective of the number/position of the bolts, as long as the stem face plate was within a certain width.

User avatar
Posts: 1
Joined: Tue Apr 17, 2012 2:44 am

by mikedavey

Tillquist, your mount looks fantastic!! I'm definitely interested if/when you go into production.

Posts: 10
Joined: Mon Mar 09, 2009 1:35 am
Location: Minneapolis, MN

by TheDano

Count me in for two in anodized black also. Genius!

User avatar
Posts: 232
Joined: Sun Oct 17, 2010 8:45 pm
Location: London

by Dov

I'd be happy to pay for one or two of these too!
Felt F1 DA Di2
Cinelli Supercorsa
Cielo Classic Sportif
Concorde Shopper
Nagasawa Fixie Skid Machine
Cannondale CAAD 10 Track [custom]

Employee of Rapha

Posts: 144
Joined: Sun Nov 26, 2006 5:36 pm

by literider

Really slick, count me in.

by Weenie

Posts: 20
Joined: Mon Nov 01, 2010 3:53 am

by preludervtec

Count me in for a anodized black mount also! I've already got a 3T stem on my bike, which would make this solution perfect for me.

Post Reply