What freehub is this?

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

Post Reply
Rokkala
Posts: 98
Joined: Sat Dec 19, 2009 11:58 pm

by Rokkala

Ordered a wheelbuild, specifying I needed a campag freehub and ended up with this:

Image

What brand of cassette would fit that? Sure ain't campag...

critracer26
Posts: 560
Joined: Tue Nov 14, 2006 11:23 pm
Location: New York, NY

by critracer26

have you tried to put a campy cassette on there? sure looks weird. could you take a pic of the side of it and the whole hub.

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



User avatar
bikerjulio
Posts: 1900
Joined: Fri Dec 11, 2009 10:38 pm
Location: Welland, Ontario

by bikerjulio

It's the WW version of a Campy hub :D
There's sometimes a buggy.
How many drivers does a buggy have?

One.

So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.

http://www.youtube.com/watch?v=GekiIMh4ZkM

Rokkala
Posts: 98
Joined: Sat Dec 19, 2009 11:58 pm

by Rokkala

Another couple of pics:

Image
Image

Campag cassette will slide on, but you just have a ridiculous amount of slack, can move the cassette round from one spline to the other, so a good inch or so.

User avatar
Frankie - B
Admin - In the industry
Posts: 6573
Joined: Mon Jun 02, 2003 8:17 am
Location: Drenthe, Holland

by Frankie - B

Dude, that is a tune hub, right? It is THE WW version of a campagnolo body.

Sent from my HTC.
'Tape was made to wrap your GF's gifts, NOT hold a freakin tire on.'
If you want to see 'meh' content of me and my bike you can follow my life in pictures here!

Rokkala
Posts: 98
Joined: Sat Dec 19, 2009 11:58 pm

by Rokkala

Extralite SLX.

So what, the cassette is supposed to be able to move around when installing it, and you just rely on the lockring to ensure the cassette doesn't move back round on the freehub?

User avatar
breezerboy
Shop Owner
Posts: 279
Joined: Fri Jun 22, 2007 8:14 pm
Location: Bristol, UK

by breezerboy

Yes, basically.

Rotate the sprockets until they stop (in the drive direction) when installing, the lockring and drive torque will stop them moving. Unless you're trying to run this fixed why would they rotate backwards in use? The freewheeling of the hub stops any reverse torque.

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Post Reply