Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Sun Jul 24, 2016 4:14 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 24 posts ]  Go to page 1 2 Next
Author Message
PostPosted: Fri Mar 23, 2012 6:32 pm 
Offline
User avatar

Joined: Tue Oct 12, 2010 4:00 pm
Posts: 498
Location: MY
Anyone experience this on a Sram red setup. The chain seems like jumping whenever i put load on it.

On the bike stand it shift well. please guide me though this. :noidea:

_________________
Passoni Mirror

Passoni Xxti


Top
   
PostPosted: Fri Mar 23, 2012 6:43 pm 
Offline

Joined: Mon Oct 26, 2009 10:19 pm
Posts: 94
Location: Norcal
The liner should be slightly shorter than the links so it's not being compressed...otherwise it should work fine.
Make sure the RD hanger is aligned and the tension in the cable is correct. Tune the cable tension in the 2nd and middle gears to make sure the pulleys are centered below the cogs. In other words, add enough tension that it wants to jump to the next gear then back off until it is smooth.


Top
   
PostPosted: Fri Mar 23, 2012 7:32 pm 
Offline
User avatar

Joined: Sat Apr 16, 2005 6:08 pm
Posts: 2832
Location: Boulder, Colorado
I also shoot a bit of ptfe lubricant inside the housing before i run the cable. Keeps the friction on the cable to almost nil.

As far as problems from using Nokons, they don't operate any differently than any other cable when adjusted properly, so there must be an adjustment problem with your R.Der. Follow the advice above...

_________________
___________________________________________________

"Organization is for the simple-minded, the Genius controls the chaos." - Jens


Top
   
PostPosted: Sat Mar 24, 2012 1:45 am 
Offline
User avatar

Joined: Tue Oct 12, 2010 4:00 pm
Posts: 498
Location: MY
ok so how about the rear cable length? is that any issue for too short or too long ? mine seems like not enought tension, too soft.

_________________
Passoni Mirror

Passoni Xxti


Top
   
PostPosted: Sat Mar 24, 2012 5:57 am 
Offline
Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1980
Location: NoVA/DC
if the chain is jumping under pressure, when not involved in a shift, then i doubt it's the housing.
is the chain new, possibly on an old cassette?


Top
   
PostPosted: Sat Mar 24, 2012 6:50 am 
Offline
User avatar

Joined: Tue Oct 12, 2010 4:00 pm
Posts: 498
Location: MY
thisisatest wrote:
if the chain is jumping under pressure, when not involved in a shift, then i doubt it's the housing.
is the chain new, possibly on an old cassette?


yes, the cassate is used and the chain is new. any problem ?

_________________
Passoni Mirror

Passoni Xxti


Top
   
PostPosted: Sat Mar 24, 2012 6:53 am 
Offline

Joined: Sun Oct 12, 2008 5:39 am
Posts: 48
Yes that means your cassette is toast. New cassette.


Top
   
PostPosted: Sat Mar 24, 2012 7:29 am 
Offline
User avatar

Joined: Tue Oct 12, 2010 4:00 pm
Posts: 498
Location: MY
why? i dont really understand.. how about a used chain ? or maybe i try to change the cable back to standard gore ride on.

_________________
Passoni Mirror

Passoni Xxti


Top
   
PostPosted: Sat Mar 24, 2012 7:56 am 
Offline
User avatar

Joined: Sun Dec 05, 2010 12:00 pm
Posts: 574
Location: Aarhus, Denmark
Your casette and chain wear "together". This means that you cant change either one if they have been ridden for a longer period of time.

New cassette and everything should work just fine.




---
I am here: http://tapatalk.com/map.php?d1jmzt

_________________
"Stay cool and try to survive" A. Klier to the other members of the Garmin classics squad the night before P-R.


Top
   
PostPosted: Sat Mar 24, 2012 9:02 am 
Offline
User avatar

Joined: Tue Oct 12, 2010 4:00 pm
Posts: 498
Location: MY
Is that the only reason with old cassate that nothing to do with the nokon ? i try it on workstand and i dont have any jumping gear problem its perfect shifting. its only jump when you ride it and there is a load while sprinting uphill .

_________________
Passoni Mirror

Passoni Xxti


Top
   
PostPosted: Sat Mar 24, 2012 9:57 am 
Offline
User avatar

Joined: Sun Dec 05, 2010 12:00 pm
Posts: 574
Location: Aarhus, Denmark
Sounds exactly like a differently worn cassete and chain.

_________________
"Stay cool and try to survive" A. Klier to the other members of the Garmin classics squad the night before P-R.


Top
   
PostPosted: Sat Mar 24, 2012 10:27 am 
Offline
User avatar

Joined: Tue Oct 12, 2010 4:00 pm
Posts: 498
Location: MY
i also suspect other problem than cassate, although is used, but its still in very top condition.

unless i test with standard cable, if problem remains, then its the cassate.

_________________
Passoni Mirror

Passoni Xxti


Top
   
PostPosted: Sat Mar 24, 2012 11:56 am 
Offline

Joined: Sun Oct 12, 2008 5:39 am
Posts: 48
Dude, I don't know why you're even debating this.

If you change your chain before it gets too worn then you'll get better life from your cassette. If you stretch the chain too much, as in 12 links pin to pin get out to around 12 1/8" inches, then regardless of the age of the cassette you've probably ruined it. Visually inspecting it won't tell you much, but if you put a new chain on and it's jumping then you need to replace it.

Ultimately you should be replacing the chain at or before 12 1/16", you don't do this, you'll be replacing more cassettes than is necessary.

It has absolutely nothing to do with your cables. You want validation, put your old chain back on and it'll all work just fine. It's 20 minutes of your life you'll never get back though.


Top
   
PostPosted: Sat Mar 24, 2012 6:09 pm 
Offline
User avatar

Joined: Tue Oct 12, 2010 4:00 pm
Posts: 498
Location: MY
sideshow_bob wrote:
Dude, I don't know why you're even debating this.

If you change your chain before it gets too worn then you'll get better life from your cassette. If you stretch the chain too much, as in 12 links pin to pin get out to around 12 1/8" inches, then regardless of the age of the cassette you've probably ruined it. Visually inspecting it won't tell you much, but if you put a new chain on and it's jumping then you need to replace it.

Ultimately you should be replacing the chain at or before 12 1/16", you don't do this, you'll be replacing more cassettes than is necessary.

It has absolutely nothing to do with your cables. You want validation, put your old chain back on and it'll all work just fine. It's 20 minutes of your life you'll never get back though.


I brought the groupset new without the cassate and i found one used cassate on forum thats all, Basically everything is new and i dont have a used chain with me.

I just need to get some info before i purchaase a new cassate as if it still jump around i will be wasting my money.

_________________
Passoni Mirror

Passoni Xxti


Top
   
PostPosted: Sat Mar 24, 2012 7:21 pm 
Offline

Joined: Fri Oct 07, 2011 2:08 pm
Posts: 1365
I have red with nokon ,no issues . I think its your cassette. If there is a problem with your cable set up, you wil feel it and see the issues easy on a work stand , really sounds like it's your cassette to me. New chain and cassette and your problem will be solved. Simple
Good luck


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 24 posts ]  Go to page 1 2 Next

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Putting Sram Red 10 speed levers back together. Sluggish shifting. Fixed

in Road

chris14

1

347

Thu Jun 09, 2016 4:30 pm

chris14 View the latest post

There are no new unread posts for this topic. Shifting woes

in Road

Gregorio

8

644

Wed Jun 15, 2016 4:48 pm

audiophilitis View the latest post

There are no new unread posts for this topic. Wheel and Shifting

in Road

ipenguinking

7

276

Sat Apr 23, 2016 1:11 am

fh8425 View the latest post

There are no new unread posts for this topic. EPS V2 shifting issues

in Road

tadrums

10

481

Sun Apr 03, 2016 5:49 am

tadrums View the latest post

There are no new unread posts for this topic. Campagnolo EPS shifting problem

in Road

Martin.F

3

516

Sun Sep 06, 2015 7:51 pm

XCProMD View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Bing [Bot], kookie, liketoride, lovemyway, userfriendly and 31 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited