Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Sat Dec 10, 2016 2:30 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 35 posts ]  Go to page 1 2 3 Next
Author Message
PostPosted: Thu Mar 15, 2012 12:00 pm 
Offline

Joined: Sun Mar 13, 2011 10:36 am
Posts: 12
Has anyone any info on the 3.4's being made as clinchers? That would be my mind made up!


Top
   
PostPosted: Thu Mar 15, 2012 8:40 pm 
Offline

Joined: Tue Aug 02, 2011 9:20 pm
Posts: 1675
Location: New Zealand
Not sure, best to email Enve to find out

_________________
2012 BMC SLR 6.02kg http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=110390


Top
   
Posted: Thu Mar 15, 2012 8:40 pm 


Top
   
 
PostPosted: Thu Mar 15, 2012 9:22 pm 
Offline
User avatar

Joined: Tue Apr 18, 2006 3:03 am
Posts: 2439
Location: Islip, NY
Very soon.

_________________
www.ergottwheels.com


Top
   
PostPosted: Fri Mar 16, 2012 1:26 am 
Offline

Joined: Wed Oct 19, 2011 4:50 pm
Posts: 42
Location: Poormans Canyon
Has any of you seen any data comparing the 3.4s to the 45s?


Top
   
PostPosted: Fri Mar 16, 2012 1:47 pm 
Offline
Tinker, Taylor, Tart

Joined: Sat Nov 29, 2008 8:00 pm
Posts: 1847
Location: Sydney, Aus.
Enve-Smart 3.4 clincher due this week according to the UK distributor


Top
   
PostPosted: Thu Mar 22, 2012 4:34 am 
Offline

Joined: Sun Aug 22, 2010 11:56 pm
Posts: 39
I thought I heard that they were going to start releasing them as early as next week to dealers....I just can't remember where I read that to verify right now.


Top
   
PostPosted: Thu Mar 22, 2012 5:11 pm 
Offline
User avatar

Joined: Thu Aug 21, 2008 1:13 am
Posts: 852
Location: Utah
Will they be releasing 3.4 & 6.7 clinchers?

(or just 3.4 first)?


Last edited by carbon2329 on Thu Mar 22, 2012 9:32 pm, edited 2 times in total.

Top
   
PostPosted: Thu Mar 22, 2012 9:03 pm 
Offline
User avatar

Joined: Mon Oct 23, 2006 2:28 am
Posts: 557
Location: Northern California
In before the first "carbon clinchers are stupid" post!


Top
   
PostPosted: Thu Mar 22, 2012 11:17 pm 
Offline
User avatar

Joined: Tue Apr 18, 2006 3:03 am
Posts: 2439
Location: Islip, NY
3.4s are ready for orders now.

:mrgreen:

_________________
www.ergottwheels.com


Top
   
PostPosted: Thu Mar 22, 2012 11:46 pm 
Offline

Joined: Thu Jan 26, 2006 6:01 pm
Posts: 1698
Come on now, don't hold out on us. Give us the run down on the specs! :)


Top
   
PostPosted: Fri Mar 23, 2012 12:10 am 
Offline
User avatar

Joined: Tue Apr 18, 2006 3:03 am
Posts: 2439
Location: Islip, NY
Rim weights are projected to be 435g front and 450g rear which is a 165g increase. My last set of 3.4s laced to Alchemy hubs were 1254g so a set they way I built them (CX-Rays with Wheelsmith DB14s for the right, rear) should weigh 1420g or so. Spoke count is limited to 20/24 like the other SES 3.4 and 6.7s. The 8.9 spoke count is 16/20.

Check your favorite builder for pricing. The price should actually be the same as the tubular wheels were and the tubular wheels went down in price about $150.

_________________
www.ergottwheels.com


Top
   
PostPosted: Fri Mar 23, 2012 3:11 am 
Offline
User avatar

Joined: Wed Oct 22, 2003 12:34 pm
Posts: 1671
Location: New York City
ergott wrote:
Rim weights are projected to be 435g front and 450g rear which is a 165g increase. My last set of 3.4s laced to Alchemy hubs were 1254g so a set they way I built them (CX-Rays with Wheelsmith DB14s for the right, rear) should weigh 1420g or so. Spoke count is limited to 20/24 like the other SES 3.4 and 6.7s. The 8.9 spoke count is 16/20.

Check your favorite builder for pricing. The price should actually be the same as the tubular wheels were and the tubular wheels went down in price about $150.


Nice. So when do we see one of your builds with these? The weight is good, 50g less than the Zipp 303 for the same height.

You are my favorite builder, so expect a call from me as soon as I finish my CCNP.


Top
   
PostPosted: Fri Mar 23, 2012 2:33 pm 
Offline

Joined: Mon Apr 05, 2010 4:14 pm
Posts: 246
Expensive wheels, but I'm nonetheless impressed that they've kept the carbon clincher price the same as the tubular one. Competitive marketplace?


Top
   
PostPosted: Fri Mar 23, 2012 3:17 pm 
Offline
Shop Owner
User avatar

Joined: Sun Feb 06, 2005 4:22 pm
Posts: 3688
Location: Tucson, Az.
petromyzon wrote:
Expensive wheels, but I'm nonetheless impressed that they've kept the carbon clincher price the same as the tubular one. Competitive marketplace?


Not exactly correct, the clinchers are the price that the tubulars were previously. I don't know when it will be official but the SES tubulars are all going down in price from $975 per rim to $875 per rim. We've already lowered our pricing on them and I'd expect others will do the same shortly.

_________________
Fair Wheel Bikes

Fair Wheel Blog

Instagram


Top
   
PostPosted: Fri Mar 23, 2012 4:16 pm 
Offline
User avatar

Joined: Tue Apr 18, 2006 3:03 am
Posts: 2439
Location: Islip, NY
carbon2329 wrote:
Will they be releasing 3.4 & 6.7 clinchers?

(or just 3.4 first)?


The 6.7s are planned for this season. There will be an 8.9 clincher as well, but that timeframe isn't solid yet.

_________________
www.ergottwheels.com


Top
   
Posted: Fri Mar 23, 2012 4:16 pm 


Top
   
 
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 35 posts ]  Go to page 1 2 3 Next

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. 2016 Zipp 202 FC Clinchers vs. Enve Smart 3.4 CCL

[ Go to page: 1 2 ]

in Road

Morta

26

3073

Fri Feb 12, 2016 10:52 am

djqgmffj View the latest post

There are no new unread posts for this topic. Tubeless setup on Generation 1 Enve SES Clinchers

in Road

mnmasotto

6

548

Mon Oct 03, 2016 10:36 pm

FIJIGabe View the latest post

There are no new unread posts for this topic. Looking At Enve 3.4's - Hub Question

[ Go to page: 1 2 ]

in Road

McGilli

15

1032

Thu Sep 29, 2016 6:18 am

McGilli View the latest post

There are no new unread posts for this topic. Enve 2.0 Fork

[ Go to page: 1 2 ]

in Road

beatle

17

3534

Sun Jan 10, 2016 1:32 pm

beatle View the latest post

This topic is locked, you cannot edit posts or make further replies. ENVE SES 4.5 or Lightweight???

[ Go to page: 1 2 3 ]

in Road

jerrybrabus

32

2978

Fri Jul 29, 2016 5:02 am

reggiebaseball View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Google Adsense [Bot], istigatrice, springs, Yahoo [Bot] and 25 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited