Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Wed Aug 24, 2016 10:45 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Sat Mar 17, 2012 9:23 pm 
Offline

Joined: Thu Nov 18, 2010 8:15 pm
Posts: 4
Hi,

I`m wondering can anybody help me with my issue..

I bought a set of Hed stingers 4 with shimano freehub body back in early 2011.I am now looking to change to campagnolo 11 speed,so i got a new hed campag freehub body.

When i put on the cassette and tighten it ,it leaves no space between the lock ring and the end cap..

Any help would be appreciated..


Attachments:
hub1.JPG
hub1.JPG [ 10.04 KiB | Viewed 1638 times ]
HUB2.JPG
HUB2.JPG [ 9.97 KiB | Viewed 1637 times ]
Top
   
PostPosted: Sat Mar 17, 2012 11:10 pm 
Offline

Joined: Mon Apr 10, 2006 8:45 pm
Posts: 36
Location: Denmark
Try to contact Andy Tetmeyer from Hed Cycling. He is very helpfull. :D
hedtech@hedcycling.com
I guess you need a small shim.


Top
   
PostPosted: Sat Mar 17, 2012 11:57 pm 
Offline
Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1980
Location: NoVA/DC
there is a little space there.
campy wheels often leave very little space between the lockring and the dropout. mavic wheels are an exception. is it possible the lockring is insufficiently tightened? a little spacer compression, etc..


Top
   
PostPosted: Sun Mar 18, 2012 3:06 am 
Offline
User avatar

Joined: Mon Dec 21, 2009 6:00 am
Posts: 453
Location: Bay Area, CA
Did you just pop on the freehub body or did you change the spacers as well? I swapped from a Campy body to a Shimano body and this is what Andy @ Hed sent me.

Image


Top
   
PostPosted: Sun Mar 18, 2012 6:16 pm 
Offline

Joined: Thu Nov 18, 2010 8:15 pm
Posts: 4
Hi,

thank you for your replys.

I have tighten the cassette too the right torque but has made no difference.

BeeSeeBee, I have striped the hub down to its axle but i dont have any washer or spacers as your diagram would show.. See photo..

Is this diagram for a older Hed wheel model. My year model is 2011 with the red bearing seals and caps..

Is there anyone outer who has had similar problem..

Is there a special end cap to be used with the campag freehub body?which would give you more clearance..


Attachments:
HUB4.JPG
HUB4.JPG [ 11.7 KiB | Viewed 1522 times ]
Top
   
PostPosted: Mon Mar 19, 2012 12:47 am 
Offline
Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1980
Location: NoVA/DC
can you show a larger pic? hard to see what's actually there


Top
   
PostPosted: Mon Mar 19, 2012 11:20 pm 
Offline

Joined: Mon Mar 19, 2012 12:20 pm
Posts: 1
Had the same issue with the Campagnolo freehub on my 2011 Stinger 6's.

I found that my used 11spd Record casette would bind when I tightened the lockring, but a new 11spd Chorus casette would be OK. The local HED distributor swapped my freehub body, and I still had the same issue.

To fix this, I skimmed about 1 mm off the bottom threaded portion of the lock ring. Took about 5 minutes with a piece of 800 grit wet & dry paper on a flat surface.

I put the binding down to the fact that either the plastic spacers between the older casette cogs must have very slightly worn thinner over time, causing the lock ring to foul, or Campagnolo made a running change to the casette cog spacings.

Hope this helps. Cheers, Dean.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 7 posts ] 

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Attachment(s) Advice on Freehub body

in Road

quaman26

2

300

Sat Feb 20, 2016 4:59 am

quaman26 View the latest post

There are no new unread posts for this topic. Changing freehub body from Shimano to Campy on a Zip 900 Disc

in Road

clm2206

3

187

Mon May 16, 2016 11:08 am

Nefarious86 View the latest post

There are no new unread posts for this topic. Edco Multisys Freehub - Campagnolo last cog issue

in Road

ParisCarbon

6

500

Thu Oct 22, 2015 8:08 pm

ms6073 View the latest post

There are no new unread posts for this topic. Campagnolo Neutron freehub weight - Campag vs Shimano

in Road

adamcoppock

6

355

Wed Jul 06, 2016 6:51 am

adamcoppock View the latest post

There are no new unread posts for this topic. Changing free-hub body Campa bora Clincher???

in Road

poppiholla

9

368

Sun May 22, 2016 12:21 am

fh8425 View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Yahoo [Bot] and 24 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited