Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Wed Sep 28, 2016 8:09 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 22 posts ]  Go to page 1 2 Next
Author Message
PostPosted: Wed Mar 14, 2012 8:47 pm 
Offline

Joined: Wed Dec 07, 2011 1:26 am
Posts: 414
Location: California's country side
I am sure most of use heard of using a straight edge and bottom of the lever is even with the bottom of the bar?

well I want the hood to be flat and almost level, (do not like hood "knobs" pointing at my face, although some people sets it up that way), but my placement puts the lever tip a few mms lower than the bar bottom.

I am using Zipp traditional bend and it is a continous "C" shape. Even so, the band is around the top of the rough texture area.. going down further just doesn't seem usable.


Any tips?


Top
   
PostPosted: Wed Mar 14, 2012 8:51 pm 
Offline

Joined: Sat Jul 29, 2006 2:36 am
Posts: 1236
Location: UK
Use some carbon paste on the clamp.


Top
   
Posted: Wed Mar 14, 2012 8:51 pm 


Top
   
 
PostPosted: Thu Mar 15, 2012 4:49 am 
Offline
Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1980
Location: NoVA/DC
with all the variances in bar drop and reach, i've adopted a different guideline. i set the flat part of the hood tops to be parallel to the bottom of the bar drops. in a lot of cases, it ends up millimeters from the straightedge method, but on the odd bars, it still works...
and i hate, hate, hate it when someone rotates the bar up, and lowers the hoods on the bar, in a futile attempt to "level" the transition between the bar and hood. it literally never improves the situation...


Top
   
PostPosted: Thu Mar 15, 2012 10:39 am 
Offline

Joined: Mon May 16, 2011 8:14 pm
Posts: 410
Can you guys post some pics of what your talking about? In my setup, I try to have the top of my bar level, and then the transition onto the hood also level, so its pretty much all a straight line, and level with the ground. This usually puts my bar drops pointing towards the rear wheel skewer. I'm always interested in whether or not there is a more comfortable position, but somehow can't picture what your talking about.. I'll probably have to go look at my bike and re-read this..!


Top
   
PostPosted: Thu Mar 15, 2012 11:21 am 
Offline

Joined: Wed Mar 28, 2007 12:49 pm
Posts: 1594
Location: Near Horgen, Switzerland
Aligning the lever tips to graze a straight edge on the bottom of the bars is old school. It works ok with medium drop round bars, but doesn't work so well with shallow bars designed so that the top of the lever lies flat with the top of the bars. I've tried taping a small block to the ruler to lift both levers to where I like them, but this is hit and miss because the bottom of most bars is slightly curved so it's no better than doing it by eye.

Personally I prefer to put one lever in a good position by eye / sitting on the saddle and testing it until I like the position. Then I tighten it fully. Then I roughly put the other lever in a matching position by eye, and angle it correctly. Then I lay a large pipe on top of both levers and wiggle the second lever until the pipe lies exactly parallel with the top of the bars. I have a 45 cm section of large diameter shower rail in the shed expressly for this. Easy peasy.


Top
   
PostPosted: Thu Mar 15, 2012 1:31 pm 
Offline

Joined: Sat Dec 13, 2003 2:25 am
Posts: 4764
Location: Canada
Another way to do it is with a level along the top of the hoods.

Lots of guys like to set the bar up with the hoods and the top of the bar making a smooth transition. Most of the bikes in my collection are set-up like that. Does this result in the bar and hoods looking like the set-up thisislatest hates? Probably. It does look a bit strange, but they have to ride 7 hours a day for a living and choose comfort and speed over looks all the time.


Top
   
PostPosted: Thu Mar 15, 2012 1:51 pm 
Offline
User avatar

Joined: Sat Aug 29, 2009 4:30 pm
Posts: 1936
Using the Reach, Drop, and desired projection of the "pointy part" above the horizontal as parameters we can apply these equations:
Image


Top
   
PostPosted: Thu Mar 15, 2012 1:57 pm 
Offline

Joined: Mon Feb 18, 2008 7:44 am
Posts: 529
Location: Australia
:lol: :lol:


Top
   
PostPosted: Thu Mar 15, 2012 5:42 pm 
Offline

Joined: Fri Nov 17, 2006 12:04 am
Posts: 66
It's so clear to me now :doh:


Top
   
PostPosted: Thu Mar 15, 2012 8:38 pm 
Offline

Joined: Tue Dec 27, 2011 2:19 pm
Posts: 661
why not go and get fit and do what works best for your body :beerchug:


Top
   
PostPosted: Thu Mar 15, 2012 8:42 pm 
Offline
User avatar

Joined: Sun Nov 07, 2010 9:14 pm
Posts: 3442
Rick wrote:
Using the Reach, Drop, and desired projection of the "pointy part" above the horizontal as parameters we can apply these equations:
Image

:exactly: And once again, as with everything in life, it all boils down to the desired projection of the "pointy part".
It really is that simple. :beerchug:

_________________
C59 Five Years Later
My Special Colnago EPQ
Trek Emonda SL


Top
   
PostPosted: Thu Mar 15, 2012 9:11 pm 
Offline

Joined: Tue Dec 23, 2008 2:57 pm
Posts: 824
Location: NYC
mrfish wrote:
Aligning the lever tips to graze a straight edge on the bottom of the bars is old school. It works ok with medium drop round bars, but doesn't work so well with shallow bars designed so that the top of the lever lies flat with the top of the bars.



+1...as old school as the archaic fitting myth that a bike fits properly when the top of your bars are in the line of sight with your front hub.

There is no right or wrong on this issue...fit your levers where they are comfortable for YOU and enjoy the ride.

Em3

_________________
______________

My 2013 Cervelo R5


Top
   
PostPosted: Fri Mar 16, 2012 2:46 am 
Offline
Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1980
Location: NoVA/DC
my main issue with trying to make the bar/hood transition level is that it brings the hood very low on the bars. then in the drops, the bar is too vertical and the wrist gets cocked up. in the end, if the hood is brought up from that position and put parallel to the bottom of the drops, and the bar is taped, the transition ends up looking and feeling flat anyway.
im specifically referring to short/shallow bars like 3t ergosum/ergonova, zipp ss and ssr, etc. but works for all bars.
bad:
Image

good (bottom of drops parallel to top flat part of hoods):
Image

levers a bit low, bars a bit high:
Image

even this crazy fsa "new ergo" from a few years back fits into the guideline of hoods parallel to the bottom of the drops.
Image

this is my opinion, no matter how right it may be :wink: . im sure to catch a lot of grief for this post, but thats fine.


Top
   
PostPosted: Fri Mar 16, 2012 3:06 am 
Offline
User avatar

Joined: Sun Nov 07, 2010 9:14 pm
Posts: 3442
thisisatest wrote:
this is my opinion, no matter how right it may be :wink: . im sure to catch a lot of grief for this post, but thats fine.

I don't know why you think you'll catch a lot of grief from your post, I think it's good with pics and all. The first example is hideous for sure (look away). And your points on the other two are good as well.
I happen to prefer a classic shaped bar (probably in the minority these days), but after having used classic, then switching to "ergonometric" bars of various shapes when that became the craze, I found that I just like the classic bars best. But there are so many combinations of bars and levers out there now that it's hard to say one way is better than another, although that first example you show is truly hideous.

P.S. But I still think Rick's mathematical representation a few posts back is the best rule to follow, so long as you remember where the "pointy bits" should be pointing.

_________________
C59 Five Years Later
My Special Colnago EPQ
Trek Emonda SL


Top
   
PostPosted: Fri Mar 16, 2012 4:01 am 
Offline

Joined: Wed Dec 07, 2011 1:26 am
Posts: 414
Location: California's country side
Actually the second pic was from my old bike.. I have taken the bar from it and now setting up again.
at least you gave it a good score.


Top
   
Posted: Fri Mar 16, 2012 4:01 am 


Top
   
 
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 22 posts ]  Go to page 1 2 Next

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Shimano R785 Di2 Lever Pull

in Road

allenpg

4

612

Tue Dec 08, 2015 10:23 am

Pottsy View the latest post

There are no new unread posts for this topic. Carbon lever clamps on SRAM 22

in Road

NiFTY

0

362

Wed Dec 16, 2015 3:44 am

NiFTY View the latest post

There are no new unread posts for this topic. Replace just the brake lever assembly on a di2 shifter?

in Road

mr4fox

10

434

Tue Sep 06, 2016 12:47 pm

mr4fox View the latest post

There are no new unread posts for this topic. 11speed ergopower shift lever o-ring??

in Road

AJS914

4

487

Wed Oct 28, 2015 3:53 pm

AJS914 View the latest post

There are no new unread posts for this topic. Alfine Left Brake Lever Weight

in Road

Sooperlite

4

199

Sun Sep 18, 2016 10:19 pm

Superlite View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Exabot [Bot], fabriciom, kgt, MSNbot Media, nigel379, Vermu, zirxo and 23 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited