Orange 5 Five new project - WW/ 1x9 2x9 1x10?

View unanswered posts | View active topics

Board index » Discussion » MTB

Orange 5 Five new project - WW/ 1x9 2x9 1x10?

Moderator: Moderator Team

Page 1 of 4

[ 46 posts ]

Go to page 1, 2, 3, 4 Next

Previous topic | Next topic

Author

Message

runningrunningjump

Post subject: Orange 5 Five new project - WW/ 1x9 2x9 1x10?

Posted: Mon Mar 05, 2012 10:42 am

Joined: Tue Jun 28, 2011 10:43 pm
Posts: 199

Hello all!

Another project.

this time an Orange 5 and a classic one at that, a 2005 140mm travel one, before they slackened the head angle right off, spoilt the look with the small down tube and massive seat tube and before they changed it from a great value, impossible to break XC rig for the 'blue collar guy' into something else...

anyhow.

i picked up this baby in 2011 unused! its the bottom deore model so will weigh a ton!

ive bought some toys for it already. but as usual its over to you to help me out with suggestions. this bike will mainly see Welsh trail centre s but also some 24hr events for fun.

Last edited by runningrunningjump on Fri Mar 09, 2012 3:29 pm, edited 1 time in total.

Top

runningrunningjump

Post subject: Re: Orange 5 Five new project - WW/ 1x9 2x9 1x10?

Posted: Mon Mar 05, 2012 10:43 am

Joined: Tue Jun 28, 2011 10:43 pm
Posts: 199

IMG_0963 by runningrunningjump, on Flickr

Top

runningrunningjump

Post subject: Re: Orange 5 Five new project - WW/ 1x9 2x9 1x10?

Posted: Mon Mar 05, 2012 10:43 am

Joined: Tue Jun 28, 2011 10:43 pm
Posts: 199

IMG_0965 by runningrunningjump, on Flickr

Top

runningrunningjump

Post subject: Re: Orange 5 Five new project - WW/ 1x9 2x9 1x10?

Posted: Mon Mar 05, 2012 10:44 am

Joined: Tue Jun 28, 2011 10:43 pm
Posts: 199

IMG_1551 by runningrunningjump, on Flickr

Top

runningrunningjump

Post subject: Re: Orange 5 Five new project - WW/ 1x9 2x9 1x10?

Posted: Mon Mar 05, 2012 10:45 am

Joined: Tue Jun 28, 2011 10:43 pm
Posts: 199

IMG_1552 by runningrunningjump, on Flickr

Top

runningrunningjump

Post subject: Re: Orange 5 Five new project - WW/ 1x9 2x9 1x10?

Posted: Mon Mar 05, 2012 10:45 am

Joined: Tue Jun 28, 2011 10:43 pm
Posts: 199

IMG_1555 by runningrunningjump, on Flickr

Top

runningrunningjump

Post subject: Re: Orange 5 Five new project - WW/ 1x9 2x9 1x10?

Posted: Mon Mar 05, 2012 10:46 am

Joined: Tue Jun 28, 2011 10:43 pm
Posts: 199

IMG_1556 by runningrunningjump, on Flickr

Top

runningrunningjump

Post subject: Re: Orange 5 Five new project - WW/ 1x9 2x9 1x10?

Posted: Mon Mar 05, 2012 10:46 am

Joined: Tue Jun 28, 2011 10:43 pm
Posts: 199

IMG_1559 by runningrunningjump, on Flickr

Top

TheRookie

Post subject: Re: Orange 5 Five new project - WW/ 1x9 2x9 1x10?

Posted: Mon Mar 05, 2012 10:46 am

Joined: Wed Jan 18, 2012 4:23 pm
Posts: 306
Location: Midlands, United Kingdom

Personally I'd go 2x9 for now, and focus on getting wheel and tyre weight competative, the Deores stuff will last a while and allow you to swap to lighter bits as they wear out, what budget right now for weight saving? Front mech weight looks not too bad compared to the rear!

What Manitou's, most of that era were pretty light, the lads 120mm Blacks are under 1.7Kg, while my Skareb Elites are under 1.4Kg.

Simon

_________________
Impoverished weight weenie wanna-be!
Budget 26" HT build viewtopic.php?f=10&t=110956

Top

runningrunningjump

Post subject: Re: Orange 5 Five new project - WW/ 1x9 2x9 1x10?

Posted: Mon Mar 05, 2012 10:47 am

Joined: Tue Jun 28, 2011 10:43 pm
Posts: 199

IMG_1560 by runningrunningjump, on Flickr

Top

runningrunningjump

Post subject: Re: Orange 5 Five new project - WW/ 1x9 2x9 1x10?

Posted: Mon Mar 05, 2012 10:48 am

Joined: Tue Jun 28, 2011 10:43 pm
Posts: 199

IMG_1562 by runningrunningjump, on Flickr

Top

runningrunningjump

Post subject: Re: Orange 5 Five new project - WW/ 1x9 2x9 1x10?

Posted: Mon Mar 05, 2012 10:49 am

Joined: Tue Jun 28, 2011 10:43 pm
Posts: 199

hoping to remove the front shifter and cable and run the deore mech with the single ring but i am having trouble with set up! the screw for the front mech seems to be at the end of the travel and adjustment is really hard! any one have any experience please?

Top

runningrunningjump

Post subject: Re: Orange 5 Five new project - WW/ 1x9 2x9 1x10?

Posted: Mon Mar 05, 2012 10:50 am

Joined: Tue Jun 28, 2011 10:43 pm
Posts: 199

IMG_1563 by runningrunningjump, on Flickr

Top

runningrunningjump

Post subject: Re: Orange 5 Five new project - WW/ 1x9 2x9 1x10?

Posted: Mon Mar 05, 2012 10:50 am

Joined: Tue Jun 28, 2011 10:43 pm
Posts: 199

IMG_1565 by runningrunningjump, on Flickr

Top

runningrunningjump

Post subject: Re: Orange 5 Five new project - WW/ 1x9 2x9 1x10?

Posted: Mon Mar 05, 2012 10:56 am

Joined: Tue Jun 28, 2011 10:43 pm
Posts: 199

Chor im getting answers right away!

thanks the rookie!

to clarify ive hit this bike hard over the past year and everything is warn out!

ive already got and fitted: weights to come:

Fox F120 forks
Hope SP3 hubs on DT swiss tubless rims with stans
Hope QR
FSA headset
FSA stem carbon face plate
FSA bars
Thomson 27.2 330 elite post on order
KCNC seat clamp on order
Avid Elixr CR 185 front brake

Top

Page 1 of 4

[ 46 posts ]

Go to page 1, 2, 3, 4 Next

Board index » Discussion » MTB

Who is online

Users browsing this forum: Bing [Bot] and 10 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

	Author	Replies	Views	Last post
1x10 chainline in Road	wassertreter	0	234	Mon Sep 10, 2012 10:11 am wassertreter
1x10 chainline in MTB	wassertreter	6	986	Wed Oct 31, 2012 2:24 pm wassertreter
FSA 3 bolt chainrings - 1X10 in MTB	Steve Curtis	8	719	Mon Sep 24, 2012 11:41 pm stephen@fibre-lyte
What bb30 Chainset for 1x10 in MTB	Steve Curtis	7	914	Thu Oct 04, 2012 12:38 pm Steve Curtis
Di2 1x10/11 Hack, will this work? in MTB	Toorqs	3	614	Sat Jan 05, 2013 7:27 am Toorqs