Shimano 7900 bar clamps..

Page 2 of 3

[ 31 posts ]

Go to page Previous  1, 2, 3  Next

Print view Previous topic | Next topic

Author	Message
Frankie - B	Post subject: Re: Shimano 7900 bar clamps.. Posted: Thu Feb 23, 2012 6:10 pm
Administrator Joined: Mon Jun 02, 2003 8:17 am Posts: 6651 Location: Drenthe, Holland	I'm on board with the cf clamps. I weight between 80 an 85 kilo and would trust the cf ones better then alloy ones. Sent from my HTC. _________________ 'Tape was made to wrap your GF's gifts, NOT hold a freakin tire on.' Follow me on twitter. I try to be interesting On Facebook!
Top

Weenie	Post subject: Re: Shimano 7900 bar clamps.. Posted: Thu Feb 23, 2012 6:10 pm
Top

andy2	Post subject: Re: Shimano 7900 bar clamps.. Posted: Thu Feb 23, 2012 6:58 pm
in the industry Joined: Sun Dec 16, 2007 9:33 pm Posts: 701 Location: Luxembourg / Sweden	What Frankie said. I've been on the BTP carbon clamps on several bikesfor a few years. One case in point, 85kg on a cross bike that I just had a look at and they're perfect. Way these things work they are in tension when mounted, so cf is actually the perfect material. /a _________________ Technical Artisans
Top

2ndgen	Post subject: Re: Shimano 7900 bar clamps.. Posted: Thu Feb 23, 2012 10:06 pm
Joined: Mon Jul 05, 2010 5:18 pm Posts: 617	5 8 5 wrote: 2ndgen, that links for Ti model - same part no? Yes sir. _________________ Project CAAD9 7.2kg The CAAD Build Thread
Top

5 8 5	Post subject: Re: Shimano 7900 bar clamps.. Posted: Fri Feb 24, 2012 12:22 am
Joined: Sat Jul 29, 2006 2:36 am Posts: 1048 Location: UK	Bit confused 2ndgen. You said you had some info on the aluminium clamps?
Top

thisisatest	Post subject: Re: Shimano 7900 bar clamps.. Posted: Fri Feb 24, 2012 12:51 am
Shop Owner Joined: Sat Jun 13, 2009 4:02 am Posts: 1951 Location: NoVA/DC	shimano doesnt make aluminum clamps.
Top

2ndgen	Post subject: Re: Shimano 7900 bar clamps.. Posted: Fri Feb 24, 2012 2:24 am
Joined: Mon Jul 05, 2010 5:18 pm Posts: 617	5 8 5 wrote: Bit confused 2ndgen. You said you had some info on the aluminium clamps? Did I? I must've mixed that up with another topic I was posting on. I'm looking into a fr der clamp replacement in aluminum. _________________ Project CAAD9 7.2kg The CAAD Build Thread
Top

5 8 5	Post subject: Re: Shimano 7900 bar clamps.. Posted: Sat Feb 25, 2012 11:08 pm
Joined: Sat Jul 29, 2006 2:36 am Posts: 1048 Location: UK	2ndgen, you are correct. It was late, I was tired...............soz
Top

2ndgen	Post subject: Re: Shimano 7900 bar clamps.. Posted: Sat Feb 25, 2012 11:17 pm
Joined: Mon Jul 05, 2010 5:18 pm Posts: 617	5 8 5 wrote: 2ndgen, you are correct. It was late, I was tired...............soz No worries. _________________ Project CAAD9 7.2kg The CAAD Build Thread
Top

SL58	Post subject: Re: Shimano 7900 bar clamps.. Posted: Mon Feb 27, 2012 4:19 am
Joined: Tue Oct 30, 2007 5:02 pm Posts: 642	I used Ti t-bolt and Alu. nut with existing setup. Total weight is heavier than BTP but equal to Shimano even though steel band was there. A lot cheaper though.
Top

CAADEL	Post subject: Re: Shimano 7900 bar clamps.. Posted: Fri Mar 29, 2013 7:02 pm
Joined: Sun Jul 24, 2011 11:59 pm Posts: 4	2ndgen wrote: http://www.ebikestop.com/shimano_st_7900_sti_lever_clamp_band_unit-LD7756.php?PARTNER=GOOGPS Shimano ST-7900 STI Lever Clamp band Unit MFR's Part #: Y6RT98130 $110./pr. You're better off getting the Ti versions. Are the bolt and nut made of titanium too or just the band?
Top

Neoryan7	Post subject: Re: Shimano 7900 bar clamps.. Posted: Tue Apr 09, 2013 7:04 am
Joined: Tue Mar 27, 2012 6:56 am Posts: 6	the t-nut with the titanium band is about is more or less 1 gram lighter than the ones that come with the steel band. I upgraded my ultegra di2. titanium band=6.7g t-nut=2g steel band=9.5g t-nut=3.4 Saved 4.2 grams per shifter.
Top

uraqt	Post subject: Re: Shimano 7900 bar clamps.. Posted: Wed Apr 10, 2013 12:22 am
Joined: Mon Apr 03, 2006 8:53 am Posts: 266	Neoryan7, Thanks for posting, There are new TI lighter bands for 9000, but nobody has confined with pix. Just from the Shimano part #'s C
Top

Neoryan7	Post subject: Re: Shimano 7900 bar clamps.. Posted: Wed Apr 10, 2013 5:54 am
Joined: Tue Mar 27, 2012 6:56 am Posts: 6	The new ones look more heavily machined than the 7900 series ones.
Top

drainyoo	Post subject: Re: Shimano 7900 bar clamps.. Posted: Sun Feb 16, 2014 3:01 pm
Joined: Sun Jun 17, 2007 6:56 pm Posts: 502	Anyone have real weights for these, and are the nuts and bolts titanium as well?
Top

indywagon	Post subject: Re: Shimano 7900 bar clamps.. Posted: Sun Feb 16, 2014 10:41 pm
Joined: Wed Nov 11, 2009 11:53 pm Posts: 47	I stripped one of mine a while back and wound up purchasing what turned out to be a bag five, I think. Somewhere in the garage, I still have four. Let me know if you're interested. Chris
Top

Weenie	Post subject: Re: Shimano 7900 bar clamps.. Posted: Sun Feb 16, 2014 10:41 pm
Top

Display posts from previous: All posts1 day7 days2 weeks1 month3 months6 months1 year Sort by AuthorPost timeSubject AscendingDescending

Page 2 of 3

[ 31 posts ]

Go to page Previous  1, 2, 3  Next