Custom Wheel Decals
Moderator: robbosmans
-
- Posts: 351
- Joined: Tue Jun 30, 2009 7:40 pm
- Location: CA
A friend of mine wanted some custom colored decals for his Zipp 404s so I went ahead and created the artwork for him. Now that I have the artwork, I figured I should see if there was any interest here in having some decals made. I can put together some Enve 45/25 decals as well as they seem pretty popular around here.
So, anybody interested in some decals for Zipp 404s/303s or Enve 45/25? Let me know your ideas here or PM me.
Here are a couple examples of yellow themed Zipp decals:
So, anybody interested in some decals for Zipp 404s/303s or Enve 45/25? Let me know your ideas here or PM me.
Here are a couple examples of yellow themed Zipp decals:
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 351
- Joined: Tue Jun 30, 2009 7:40 pm
- Location: CA
Here are some Enve 45 mockups. I could do them with or without the smart logo and/or outline. I'm not including the "wings" of the standard decals because I don't really like them and it would take me some effort to accurately re-create. Reflective is possible, but probably cost prohibitive at the quantities we would be ordering.
Last edited by billspreston on Tue Feb 07, 2012 9:17 am, edited 1 time in total.
Why "SMART" decals on a non "SMART" model?
-
- Posts: 351
- Joined: Tue Jun 30, 2009 7:40 pm
- Location: CA
It's just a mockup. The "Smart" 3.4 rear rim is 45mm so the decal dimensions are the same. Just showing that the smart decals are possible as well, for those that own those wheels.
-
- Posts: 351
- Joined: Tue Jun 30, 2009 7:40 pm
- Location: CA
Took some time and drew the Enve "wings". They might not be exact, but very close.
- Ramjm_2000
- Posts: 524
- Joined: Thu Feb 02, 2006 10:26 pm
- Location: US of A
What would be cool would be a matte black decal designed to go over the ENVE logo on a fork. One that would produce a white "outline" with the original logo. Just a thought...
email me your contact information. I'm interested in having rims done. I have the artwork already and I'm looking for various rim depths and in a reflective decal material.
Thanks,
Eric
Thanks,
Eric
-
- Posts: 341
- Joined: Sat Dec 17, 2011 4:38 pm
- Location: Netherlands
What kind of material are the decals made from?
Pascal
2012 Colnago C59 MTBK Camapgnolo Hyperon Ultra 2 and Campi SR11
2014 Merida Big 99 CF team fully
2015 Pinarello F8 Sky Campagnolo Bora Utra 2 and Campi SR11 EPS (RIP after crash)
2016 Trek Mad-One Limited Team Edition
2012 Colnago C59 MTBK Camapgnolo Hyperon Ultra 2 and Campi SR11
2014 Merida Big 99 CF team fully
2015 Pinarello F8 Sky Campagnolo Bora Utra 2 and Campi SR11 EPS (RIP after crash)
2016 Trek Mad-One Limited Team Edition
-
- Posts: 351
- Joined: Tue Jun 30, 2009 7:40 pm
- Location: CA
Ramjm_2000 wrote:What would be cool would be a matte black decal designed to go over the ENVE logo on a fork. One that would produce a white "outline" with the original logo. Just a thought...
It seems like that would be pretty difficult/frustrating to get centered properly during application?
rodebaron51 wrote:What kind of material are the decals made from?
Outdoor vinyl.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Just when I went and bought some 65mm ENVE decals.