luckysix wrote:I am installing some full-length nokon with the supplied cables and there is a lot of friction. I tried lubing with triflow, but it's still quite bad. Should I give powercordz a try?
Also, is it worth buying liner made by a different manufacturer? The nokon liner doesn't seem particularly smooth.
imho the ptfe powercordz liner for nokon is better than than the nokon one, it has a bit more clearance, certainly seems smoother running
i use nokon+powercordz (with sram red), it's just so much better than the gore ride-on i had before, the powercordz do not stretch, so changes are really snappy, brake feel is good too, and then there's the weight saving as well
i ride year-round, all weathers except ice, i don't use any lube, don't run full length liner, i've had no problems with powercordz sticking, no excess friction
the install takes a little extra planning/care to get the best results - the first time i did it i made the outers much too long, with powercordz you can go much tighter
this post shows my install...