Some inspiration for you...

+1

If it were me I'd be going for a second hand non-carbon Campy group. Would get a look that matches the frame IMO.

Tubs are a must for a gravel rig. Preferably anodised box section rims like Ambrosio Nemesis/chrono or Mavic GL330's with silver campy hubs and Pave style tyres.

Would probably also want 'classic' bend bars - silver of course

Lots more pondering about the direction of the build as time passes. The current thinking is to build up a relatively light, race worthy steel rig, with retro looks. The 1" Star fork (387g) might go some way towards this.

The plan at the moment is to finish off with DA7800 componentry, and I'm definitely pondering classic bend bars. Recommendations are welcome.

_________________
Bikes: Raceur, Beateur

+1 for the HB Plus rims - I'm restoring a '72 Cinelli SC to period correct condition to ride in L'Eroica - Having a second set of wheels built for everyday riding using the polished HPlus TB 14 rims laced to Record hubs - they are a great balance of new and retro - very shallow depth, great polished finish out of the box and even though the brake tracks are machined the rims shoulders are still rounded. The big bonus for the Strade Bianche is the 23mm rim width - will carry wider tyres and be more stable on the gravel. Put some Challenge Paris Roubaix 27C tyres on and you're set.

For my money I would be grabbing a New Old Stock Campy Chorus groupset off ebay for period correctness - still available new and unused out of the box if you look hard enough - or current alloy Campy Athena for the right look and modern convenience.

Either way - great project - look forward to the end result.

PS - for bars and stem you cannot go past the re-issued A1 Stem and Giro D'Italia bars which are period correct and back in production from Cinelli. White bar tape and hoods of course.

_________________
Dear Noah,
We are certain you said the boat left at 5pm,
yours sincerely
The Unicorns

@dadoflam08, can you post some pics and weight of the H Plus TB14 rims?
I'm looking at some of these to replace Ambrosio tubular rims.
Cant decide between polish or black ano.

Nice project you got going.

What weights is the frame, the fork, etc?
I have a few steelies that I am keen to strip and rebuild. Just can't keep off 'em long enough to do it.
Both 59 cm square # 1 columbus SL = 2120gm frame only. Pictured with 28mm tyres and 7 speed DT rig. I ride centuries on it on a lot of aussie dirt roads.
I have another ??? steelie, 1905 gm FO. takes a 27.0 'post???? I reckon the seat tube was brazed in upside down!

See you at l'eroica?

Hi Fletch
Rims are with the builder interstate - however the bike is due to be photographed professionally in the next 6 weeks when it is finished (which will include some good shots of the wheels) - will post then. I will ask to have the rims weighed if I remember - claimed weight is not light though - close to 500g (which is very close to the old Super Champion 'Model 58' clincher rims of the same dimensions from the 70's)

_________________
Dear Noah,
We are certain you said the boat left at 5pm,
yours sincerely
The Unicorns

Strictly speaking this is true but they have no way of knowing the age of frames so they say you can use a modern steel frame with period parts. The only rule they really enforce is down-tube shifters, cables outside of bar tape and clips/straps. Even then it's a very cursory look at each bike.

_________________
2010 Bianchi 928 SL / SRAM Red, Easton EA90 SLX

Member of C.S. Grupetto

Not @ Shifterbikes is it?

Not until next week - - presently with Andy from Fyxo - I am coming over for Melburn Roobaix next month & to pick up the bike. If you drop into Shifterbikes / Fyxo Hub the week before 24 June the finished wheels will be there

_________________
Dear Noah,
We are certain you said the boat left at 5pm,
yours sincerely
The Unicorns

Had my Parlee built there, great guys, awesome service.

Time to start wrenching things together soon! Some people won't like this, but this will be a Shimano build, as all my other bikes are Shimano-based as well. Painting the frame has been called off, I'm wondering if I should give the Star fork a white paintjob though.

_________________
Bikes: Raceur, Beateur

Not digging the DA 7800 groupset, mainly because of the bulky shifters. DA 7700 would be much nicer (and cheaper by the way) and would go great with your new parts!

_________________
My Renovo R1 wooden bike project

Check it out: the most amazing vintage Colnago, Merckx and Pinarello collection

I changed my mind an will go with silver Shimano 105 STIs. They are bulky, but have the internal cable routing. If anyone can advise me on less bulky silver lever STIs with internal routing, I'd be happy to reconsider. They need to work with a Shimano drivetrain though.

_________________
Bikes: Raceur, Beateur

Did this bike ever get finished?