Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Mon Sep 26, 2016 1:16 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 17 posts ]  Go to page 1 2 Next
Author Message
 Post subject: cervelo S3 and enve 6.7
PostPosted: Wed Oct 19, 2011 11:31 am 
Offline

Joined: Sun Jun 27, 2010 8:53 am
Posts: 259
anyone have any info on a 2010 S3...

will be hitting the GO button on some enve 6.7 and want to make sure they will clear...

I think the 2009 S3 had issues?

but the 2010 is ok???

any ideas....


Top
   
 Post subject: cervelo S3 and enve 6.7
Posted: Wed Oct 19, 2011 11:31 am 


Top
   
 
PostPosted: Thu Oct 20, 2011 2:21 am 
Offline
User avatar

Joined: Sun Oct 24, 2004 1:41 am
Posts: 576
Location: Toronto, Canada
I have tested the new 404 FC on a 2009 S3 and all is fine. the only difference between the 2009 and 10-11 models was where and how wide the stays were as they got near the dropout. It really only had issues with low profile rims with very wide spokes.

The width of the area that the rim sits is the same on all models.


Top
   
PostPosted: Fri Oct 21, 2011 7:23 am 
Offline

Joined: Fri Jun 05, 2009 9:40 am
Posts: 562
Location: Switzerland
ajh wrote:
I have tested the new 404 FC on a 2009 S3 and all is fine. the only difference between the 2009 and 10-11 models was where and how wide the stays were as they got near the dropout. It really only had issues with low profile rims with very wide spokes.

The width of the area that the rim sits is the same on all models.


It is not because of the rim that certain wheels won't fit the S3, but about the stance width of the spoke flange of the hub.

I believe Enve wheels have DT hubs, which have a rather narrow spoke flange width.


Top
   
PostPosted: Fri Oct 21, 2011 2:08 pm 
Offline
User avatar

Joined: Sun Oct 24, 2004 1:41 am
Posts: 576
Location: Toronto, Canada
it is a combination of the width of spoke, depth of rim and width of the left flange. A wide spoke on a low profile rim will hit the chainstay, think Fulcrum or Mavic, but a normal spoke on a deep rim will most likely not have any issues.


Top
   
PostPosted: Thu Nov 10, 2011 2:43 am 
Offline

Joined: Sun Jun 27, 2010 8:53 am
Posts: 259
Image
IMG_0135 by aussie_pilot, on Flickr

works!!!


Top
   
PostPosted: Thu Nov 10, 2011 3:52 am 
Offline

Joined: Sat Nov 28, 2009 10:07 pm
Posts: 573
That's gorgeous. Mind if I borrow it next season? :)

_________________
Summer -- 2011 Cannondale SuperSix HiMod 6.19 kg.
Winter -- 2005 Fuji Team Issue 6.6 kg.


Top
   
PostPosted: Thu Nov 10, 2011 4:26 am 
Offline

Joined: Sun Jun 27, 2010 8:53 am
Posts: 259
yeah it rips along the roads here in Adelaide!!!!


Top
   
PostPosted: Thu Nov 10, 2011 5:48 am 
Offline
User avatar

Joined: Sat Nov 14, 2009 6:30 am
Posts: 861
Location: So Cal
Woooooo...that looks awesome!! :shock:


Top
   
PostPosted: Thu Nov 10, 2011 4:53 pm 
Offline

Joined: Sat Feb 23, 2008 6:33 pm
Posts: 282
what? that looks great!

now, just get a mount for your G800 similar to the SRM one.


Top
   
PostPosted: Thu Nov 10, 2011 4:59 pm 
Offline
User avatar

Joined: Tue Apr 18, 2006 3:03 am
Posts: 2348
Location: Islip, NY
r_mutt wrote:
what? that looks great!

now, just get a mount for your G800 similar to the SRM one.


I've considered this, but I can't find a real solid one. Mounted on the FSA I'm scared my Garmin will fly off. It doesn't look too solid.

Do you know of others?

-Eric

_________________
www.ergottwheels.com


Top
   
PostPosted: Thu Nov 10, 2011 5:30 pm 
Offline
Shop Owner
User avatar

Joined: Tue Mar 10, 2009 5:27 am
Posts: 1244
Location: McCall, ID
Great looking build. I love the black on black graphics.

_________________
http://www.zencyclery.com


Top
   
PostPosted: Fri Nov 11, 2011 12:09 am 
Offline

Joined: Sun Jun 27, 2010 8:53 am
Posts: 259
yeah the garmin 705 will get an upgrade soon!!!!

might go to a 500, or 800 for europe in 2012


Top
   
PostPosted: Fri Nov 11, 2011 1:18 am 
Offline
User avatar

Joined: Sat Aug 13, 2011 9:43 am
Posts: 38
Location: Adelaide
ergott wrote:
r_mutt wrote:
what? that looks great!

now, just get a mount for your G800 similar to the SRM one.


I've considered this, but I can't find a real solid one. Mounted on the FSA I'm scared my Garmin will fly off. It doesn't look too solid.

Do you know of others?

-Eric

At the risk of derailing this thread (sorry) - Eric I agree, the FSA one is no good for the Edge 800 - sags a little and shakes terribly. I found Nirvana with Bevato International bike light mount. Carbon one has a cast aluminium bracket (very solid) and a carbon tube to mount the device to. I cut the tube to length required. Am using it for Egge 800 - perfect. There is a plastic one which is lighter but the rigid aluminium bracket avoids annoying shaking of the Garmin on less-than-perfect roads which makes the screen illegible. Mounts the Edge 800 in the perfect spot in front of the stem. Absolutely no danger of shedding the 800 over a bump.

http://www.geomangear.com/index.php?mai ... rers_id=24" onclick="window.open(this.href);return false;

As for the OP - the 6.7s should only represent an issue with a hub having extremely wide left spacing (such as on a triplet specific hub).

_________________
"Bite off more than you can chew, then chew like hell." Peter Brock.


Top
   
PostPosted: Fri Nov 11, 2011 4:33 pm 
Offline
User avatar

Joined: Tue Jun 12, 2007 9:42 pm
Posts: 217
Location: Oakland, CA
saroadie wrote:
At the risk of derailing this thread (sorry) - Eric I agree, the FSA one is no good for the Edge 800 - sags a little and shakes terribly. I found Nirvana with Bevato International bike light mount. Carbon one has a cast aluminium bracket (very solid) and a carbon tube to mount the device to. I cut the tube to length required. Am using it for Egge 800 - perfect. <snip/>


Further off-topic, this mount is sold under a lot of different brand names, and it does work *very* well. Unfortunately, it's not terribly light at ~57g. Here are a couple shots of it mounted (carbon tube trimmed) and with the 800 mounted in place:

Image

Image

_________________
Life's too short to ride clinchers.

Current:
Parlee Z-Zero ISP
Santa Cruz Stigmata CC

Past:
Ridley X-Fire Disc


Top
   
PostPosted: Fri Nov 11, 2011 4:54 pm 
Offline
User avatar

Joined: Tue Apr 18, 2006 3:03 am
Posts: 2348
Location: Islip, NY
r_mutt steered me toward one of those and I ordered one.

Sorry for the drift. It's a real nice bike and setup.

-Eric

_________________
www.ergottwheels.com


Top
   
Posted: Fri Nov 11, 2011 4:54 pm 


Top
   
 
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 17 posts ]  Go to page 1 2 Next

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Enve 3.4 or 4.5 Tubulars ???

[ Go to page: 1 2 ]

in Road

Bmwx5gcc

24

2632

Fri Dec 11, 2015 5:11 pm

mimason View the latest post

There are no new unread posts for this topic. Enve 2.0 Fork

[ Go to page: 1 2 ]

in Road

beatle

17

2398

Sun Jan 10, 2016 1:32 pm

beatle View the latest post

This topic is locked, you cannot edit posts or make further replies. ENVE SES 4.5 or Lightweight???

[ Go to page: 1 2 3 ]

in Road

jerrybrabus

32

2690

Fri Jul 29, 2016 5:02 am

reggiebaseball View the latest post

There are no new unread posts for this topic. Enve 4.5 vs Zipp 404 Showstopper Rim

in Road

pamountainbiker

7

2175

Wed Feb 24, 2016 2:58 pm

jwp75 View the latest post

There are no new unread posts for this topic. Enve SES 3.4 Clincher Clearance

in Road

ipenguinking

10

1330

Wed Jun 08, 2016 6:17 am

grilledcheese View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Bing [Bot], IcedHalo, NiFTY, olmostalegend, Yahoo [Bot] and 36 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited