Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About
It is currently Mon Aug 29, 2016 7:16 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 2047 posts ]  Go to page Previous 118 19 20 21 22137 Next
Author Message
PostPosted: Thu Oct 13, 2011 9:33 pm 
Offline

Joined: Mon Sep 27, 2010 8:38 am
Posts: 502
Do you buy it pre-mixed in the resin? Or do you buy a big bag of it and add it to whatever epoxy you pick?


Top
   
PostPosted: Thu Oct 13, 2011 9:46 pm 
Offline
Carbon Cowboy
User avatar

Joined: Sat Sep 04, 2010 7:20 pm
Posts: 1069
Location: Slovenia
ricerocket wrote:
Do you buy it pre-mixed in the resin? Or do you buy a big bag of it and add it to whatever epoxy you pick?


It's pre-mixed, not with "whatever epoxy".


P.S. I saw that some of the previous photos uploaded with tinypic.com aren't that good quality.. Here just the PROTO-TYPE 3 one more time uploaded with an Slovenian site, hope you can all see it? If yes, I'll rather upload then with shrani.si, probably a bit better photo quality,..

Image

Compared to:

Berk wrote:
Image


The original photos are quite large and unfortunately I lose the photo quality when uploading those photos,...

_________________
Berk PROTO-TYPE Composites - Handmade In Slovenia
Berk Composites
http://www.berk-composites.com/
info(a)berk-composites.com


Top
   
PostPosted: Thu Oct 13, 2011 10:07 pm 
Offline
User avatar

Joined: Sun Sep 21, 2008 9:07 pm
Posts: 1043
Location: Slovenia---that forest land
dereksmalls wrote:
So what does that stuff do? I'm guessing it's not little tiny robots that make the fibres super intelligent and fix themselves if you crash or scratch the frame!



i bet NASA has them

_________________
http://kavitec.blogspot.com/

click this! http://www.youtube.com/watch?v=0m8maAO-m-w


Top
   
PostPosted: Sat Oct 15, 2011 1:28 pm 
Offline
Carbon Cowboy
User avatar

Joined: Sat Sep 04, 2010 7:20 pm
Posts: 1069
Location: Slovenia
I'm working on the design of the headtube (tapered) and bottom bracket (for BB30).

About the BB I'll make it for the new press-fit bottom brackets. The only thing is that I want to be 100% sure before I start with the real work, and just to make sure: if I understand right, the press-fit BB30 needs a Ø46 shell that's 68mm wide?

On PT3 I use also press-fit bottom bracket but a standard one and not BB30. I like the idea a lot, and it would make sense if I make it with the new standards. It will also help me to make the frame as stiff as possible.

Otherwise I still need to found out how to make the tapered headtube area. I have to decide what will I use - a press-fit headset or a drop-in. For me it would be better to use press-fit, but first I want to be sure that the outer Ø of the fork and the headset will be the same or really very similar that the lines will look smooth,...anyway, now I'm searching for a good tapered fork and will rather get some parts before I start with the work, just to be sure..

_________________
Berk PROTO-TYPE Composites - Handmade In Slovenia
Berk Composites
http://www.berk-composites.com/
info(a)berk-composites.com


Top
   
PostPosted: Sat Oct 15, 2011 9:57 pm 
Offline

Joined: Thu Feb 22, 2007 8:28 pm
Posts: 60
The bore diameter on the finished PF30 road shells from paragon is 46mm +/- .05, 68mm in width. http://www.paragonmachineworks.com/cgi- ... key=BB4003

I don't think that you indicated the steer you wanted to use but Enve and 3t both offer tapered forks.


Top
   
PostPosted: Sat Oct 15, 2011 10:41 pm 
Offline
Carbon Cowboy
User avatar

Joined: Sat Sep 04, 2010 7:20 pm
Posts: 1069
Location: Slovenia
CTiride wrote:
The bore diameter on the finished PF30 road shells from paragon is 46mm +/- .05, 68mm in width. http://www.paragonmachineworks.com/cgi- ... key=BB4003

I don't think that you indicated the steer you wanted to use but Enve and 3t both offer tapered forks.


Thanks. Yes - they both have 1.125"-1.25" (crown diameter 52mm) and 1.125"-1.5" (c.d. 56mm).

I still have to decide which tapered dimension to use, but most probably I'll go with the 1.25". It would look more elegant for my taste to have a 52mm headtube instead of 56mm :noidea:

Just a few more things to decide and I'll slowly start with the real work :thumbup:.
And I'll make it for drop-in headsets. Some more work to do, but I'm sure it will turn out nice! Of course I'll first make some experiments before the carbon work on the frame.

In short:
-internal routing
-press-fit BB30 (Ø46mm x 68mm shell)
-tapered fork (most probably 1.125"-1.25")

I'll make the mould for the frame that will be also Di2 compatible (if I would like to make a frame for Di2, otherwise I'll build the first one with Sram..).

_________________
Berk PROTO-TYPE Composites - Handmade In Slovenia
Berk Composites
http://www.berk-composites.com/
info(a)berk-composites.com


Top
   
PostPosted: Mon Oct 17, 2011 4:10 pm 
Offline
User avatar

Joined: Tue Jan 10, 2006 5:21 pm
Posts: 338
Location: Austin, TX
Was thinking about posting a link to this over in another forum I frequent - I think they'd get a kick out of it over there. Wanted to make sure it was cool to do that first.


Top
   
PostPosted: Mon Oct 17, 2011 6:15 pm 
Offline
Carbon Cowboy
User avatar

Joined: Sat Sep 04, 2010 7:20 pm
Posts: 1069
Location: Slovenia
If anyone want to share this link - sure no problem :thumbup: you can see some photos and news also on facebook - "Berk Composites".

_________________
Berk PROTO-TYPE Composites - Handmade In Slovenia
Berk Composites
http://www.berk-composites.com/
info(a)berk-composites.com


Top
   
PostPosted: Mon Oct 17, 2011 9:11 pm 
Offline
User avatar

Joined: Tue Jan 10, 2006 5:21 pm
Posts: 338
Location: Austin, TX
Thanks - really amazing work Berk and wanted to share it. If you want to take a peak at the thread it is here: http://www.bikeforums.net/showthread.ph ... om-scratch.


Top
   
PostPosted: Mon Oct 17, 2011 9:42 pm 
Offline
Carbon Cowboy
User avatar

Joined: Sat Sep 04, 2010 7:20 pm
Posts: 1069
Location: Slovenia
No problem and thanks :thumbup:

For all those who will read this thread for the first time - now I'm 19 (otherwise I study mechanical engineering and cycle as a Continental cyclist) and would like to answer to some of the comets there,..
I know that a lot of people are sceptic about those projects, but I'm sure that I know what I'm doing and it's not just some carbon fibres wrapped in a tube,...it's a long story how to make it right, also the joints aren't just some areas that are just wrapped with carbon.

And (at this moment) the frames are made only for me - I'm the one who tests my frames. I trust my skills 100% and dare to drive over 90km/h with a frame that was made with my hands. Everything is handmade by me, all the tubes, dropouts, etc.,...the procedure and materials are all top quality.

About my free time,...I'm repeating this quite often but anyway - unfortunately I'm not a company and I still have to study, train and when I have some free time I prefer to spend it with my girlfriend (!). But if we aren't able to spend our free time together I'm working with carbon, and it really isn't everyday,...hope you understand what I mean. Otherwise I'll continue working on my carbon projects and it would be a dream job for me to have some day my own company. I'm very young (not even 20..) and still have some time to reach my aim :mrgreen:

_________________
Berk PROTO-TYPE Composites - Handmade In Slovenia
Berk Composites
http://www.berk-composites.com/
info(a)berk-composites.com


Last edited by Berk on Wed Oct 19, 2011 12:28 pm, edited 1 time in total.

Top
   
PostPosted: Tue Oct 18, 2011 8:48 am 
Offline
User avatar

Joined: Sun Jun 18, 2006 10:29 am
Posts: 5495
Location: Athens, Greece
Considering your age you make a very serious and responsible effort. You love it and that's what matters the most. I wish you all the best!

_________________
My 6696gr Cipollini Bond
My 8618gr Colnago Master X-light


Last edited by kgt on Tue Oct 18, 2011 4:48 pm, edited 1 time in total.

Top
   
PostPosted: Tue Oct 18, 2011 1:50 pm 
Offline

Joined: Wed Sep 28, 2011 5:02 pm
Posts: 18
How about me make a new contest? Most Inspirational Thread of the Year (MITY).


Top
   
PostPosted: Tue Oct 18, 2011 5:27 pm 
Offline
User avatar

Joined: Fri Dec 26, 2008 12:42 am
Posts: 108
Location: Portland, OR
Berk wrote:
now I'm 19


:unbelievable:

I'm currently enrolled at a university in the States, and the 19 year olds I know there don't know their heads from their a$$es.

Well done, sir. Keep up the good work.


Top
   
PostPosted: Tue Oct 18, 2011 9:24 pm 
Offline
Carbon Cowboy
User avatar

Joined: Sat Sep 04, 2010 7:20 pm
Posts: 1069
Location: Slovenia
@kgt, ParisLove, jcconnox:

What can I say, really thanks to all! :beerchug:

I'll sure continue with my work and already made some more progress on my next frame project, but unfortunately without any photos because the procedure is my secret.
At this moment I'm working on an experiment that will take me a few more days, probably during this weekend I'll have some more news for you, will see. I'll keep you updated

_________________
Berk PROTO-TYPE Composites - Handmade In Slovenia
Berk Composites
http://www.berk-composites.com/
info(a)berk-composites.com


Top
   
PostPosted: Tue Oct 18, 2011 10:22 pm 
Offline

Joined: Sat Jan 06, 2007 9:47 pm
Posts: 3553
Location: Pittsburgh
C'mon Jure. What are you working on :wink:

_________________
RUEGAMER 5.21kg, 11.48lbs

CRUMPTON 4.40kg, 9.70lbs


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 2047 posts ]  Go to page Previous 118 19 20 21 22137 Next

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. New Berk

[ Go to page: 1 2 3 4 ]

in Introduce Yourself / Gallery - Please use metric weights.

coppercook62

47

6883

Thu Feb 04, 2016 7:15 pm

xena View the latest post

There are no new unread posts for this topic. Romin Evo Vs. Berk

in Road

ironman1

6

1085

Sun Mar 13, 2016 6:29 pm

tonytourist View the latest post

There are no new unread posts for this topic. Berk Saddle

in Wanted

KWalker

0

25

Sun Aug 28, 2016 4:29 pm

KWalker View the latest post

There are no new unread posts for this topic. Anyone on a Berk frame?

in Road

wheelsONfire

1

1099

Wed Sep 16, 2015 10:25 pm

RyanH View the latest post

There are no new unread posts for this topic. Berk saddles: Padded or not

in Road

Kukula

8

1455

Sat Jan 23, 2016 10:43 pm

Berk View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Look565w, MSNbot Media, NoBlink, thegunner and 15 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited