Cannondale CAAD9 Ultegra 6700

Who are you (no off-topic talk please)

Moderator: Moderator Team

Post Reply
Carvers
Posts: 13
Joined: Tue Jun 23, 2009 3:40 pm

by Carvers

The SystemSix has long gone, but the new build is finally complete! Has been built up from the original Tiagra version of the bike so quite a transformation.

Build list:
CAAD9 frame, 56cm in Liquigas colours
Cannondale Si full carbon forks
Ultegra 6700 shifters, RD, FD (incl KCNC braze on clamp), brake calipers (with Swissstop green pads) and cables
Rotor 3D chainset with Stronglight CT2 chainrings (52/36)
Dura Ace 7800 hubs on Mavic Open Pro Ceramics, with Conti Gatorskins
USE Race stem (110mm)
3T Ergonova Pro bars (42cm) and Lizard Skins DSP Race bartape
USE Alien carbon seatpost (27.2) and KCNC seatpost clamp
Fizik Arione Vs saddle

Weight is 8.2kg so not a weight weenie by any means but I wanted a "solid" build and I think that it is exactly that on all counts...plus it rides amazingly, from short-hop commute runs to Surrey jaunts I can't recommend this frameset enough, especially with the hard-to-find Si forks

Image
Image
Image

Cheers for looking!

Kieran

by Weenie


User avatar
Rumsas
Posts: 554
Joined: Thu Oct 23, 2008 7:25 pm

by Rumsas

i love everything but the Shimano, lovely bike...

yongkun
Posts: 405
Joined: Sun Sep 19, 2010 10:19 pm

by yongkun

quite porky, thought the weight was gonna be sub 8 based on your build list. but it looks awesome.

dcj9
Posts: 416
Joined: Mon Oct 19, 2009 5:02 pm
Location: UK

by dcj9

a caad9 build earns respect and status, without spending stupid money. this is another cool bike.

User avatar
majklnajt
Posts: 3689
Joined: Thu Apr 10, 2008 6:40 pm
Location: Lenart, Slovenia EUROPE

by majklnajt

Looks nice!!

Are those tubular rims? They look top class!!

finner
Posts: 64
Joined: Mon May 28, 2007 11:02 pm

by finner

Looks good, a no nonsense machine. Love the wheels. Can you tell us about the saddle? were you on the previous Arione and how do they compare?

jvanaren
Posts: 8
Joined: Thu Jul 14, 2011 3:24 am

by jvanaren

Nice build. I have an 07 Caad9 2 which had ultegra originally. It now has dura-ace, mavik kysrium ES rims, and easton slx fork. I think it weighs about 16 lb w/o pedals.

User avatar
Powerful Pete
Moderator
Posts: 4004
Joined: Fri Dec 10, 2004 10:22 am
Location: Lima, Peru and occasionally in the Washington DC area.
Contact:

by Powerful Pete

:welcome:

Good solid build.

I am also partial to traditional wheelsets that can be depended on.

Now, where do you plan to begin to cut the weight? :twisted:
Road bike: Cervelo R3, Campagnolo Chorus/Record mix...
Supercommuter: Jamis Renegade...pastatrails.blogspot.com
And you can call me Macktastik Honey Pete Kicks, thank you.

Carvers
Posts: 13
Joined: Tue Jun 23, 2009 3:40 pm

by Carvers

Rims are Open Pro Ceramic clinchers, a recommendation from Rich-Ti and they are just brilliant. Superb stopping power and, despite being probably the main culprit for the bike's weight (32 spoked too) the do roll fantastically. Compared to the Fulcrum Racing 3's that I had on previously they do take a bit more effort to get up to speed but it's not enough to take away from the ride and that braking power.

As for the saddle, I did have the standard Arione before the Vs and I can safely say I won't be going back. It may look like just a gimmik but the recessed channel really does work and I've not had an issue with it since I've had it....as they say about good saddles, I've barely noticed it, so that's good enough for me.

Now, on to the weight-loss programme, am not really too sure where to go here. I do have a CK bb to be fitted (currently the, ahem, Tiagra one on there :oops: ), and also will get round to getting some lighter weight tires/tubes (I've had 1 puncture in 3 years on the Gators so it's been tough for me to change there!) but I don't see that those changes will do too much other than get a smidge closer to 8kg.

Happy with her how she is for now (with the CK switch) so will stick with it for a bit before anything too drastic :D

jsinclair
Posts: 396
Joined: Sat Aug 27, 2011 3:26 am
Location: Sydney, Australia

by jsinclair

Can you name anywhere that still has open pro ceramics in stock? I've been looking for a pair for a few months with no luck.

User avatar
horse
Posts: 148
Joined: Sun Oct 09, 2011 1:09 pm

by horse

.

User avatar
Kastrup
Posts: 575
Joined: Sun Dec 05, 2010 12:00 pm
Location: Aarhus, Denmark

by Kastrup

It was my understanding that you couldn't run rotor with Shimano BBs, have i gotten it all wrong?

On topic: Very nice bike! I too, have just built a set of OP ceramics on 7800 hubs and i like them very much!
"Stay cool and try to survive" A. Klier to the other members of the Garmin classics squad the night before P-R.

RichTheRoadie
Tinker, Taylor, Tart
Posts: 1991
Joined: Sat Nov 29, 2008 8:00 pm
Location: Sydney, Aus.

by RichTheRoadie

Kastrup wrote:It was my understanding that you couldn't run rotor with Shimano BBs, have i gotten it all wrong?

In a word, yes. You can't run a Rotor 3D+ with a standard Shimano BB, but the rest of the range (3D and Agilis) are fine.

by Weenie


Post Reply
  • Similar Topics
    Replies
    Views
    Last post