You're not looking at the seat tube angles are you? They look pretty relaxed but the head angles are a bit on the steep side if anything. 43 rake might be the go.
That's cool - a small frame with sharp steering.

_________________
r o y g b i v

I was looking at this chart:



Jason points out it doesn't apply to this bike, however. Which should have been obvious since Jason said it was a 54 cm top tube frame, and there's nothing 54 cm in the chart.

_________________
http://djconnel.blogspot.com/
Fuji SL/1
Send your data to Weight Weenie listings!

Nice looking! Where in Italy are they located?

My worry is this is another Guru Photon where the frames start snapping because they're so brittle.

_________________
http://djconnel.blogspot.com/
Fuji SL/1
Send your data to Weight Weenie listings!

That BB cutout makes a lot of sense now that I see the picture of the cable guide from the Fondriest. Does the cutout look large enough to then put a Di2 battery up in the downtube? How clean looking would that be!

It's a custom frame but if it has Di2 specific hardware, the frame could be lighter. Therefore to those not using Di2, not so cool.

_________________
http://djconnel.blogspot.com/
Fuji SL/1
Send your data to Weight Weenie listings!

Looks like regular cable stops in the DT to me. If anything it would be even lighter if preped for di2

_________________
"Nothing compares to the simple pleasures of a bike ride," said John F. Kennedy, a man who had the pleasure of Marilyn Monroe.

Oops sorry. Got my Es and Fs confused, but as you say the chart doesn't apply anyway.

_________________
r o y g b i v

Any idea on the construction method? The looks appear to be a glued and wrapped frame. NOt too many of those since the Scott Addict. Is this made in Italy as well (I'm not talking about majority of value added, but the actual manufacturing)?

Looks very nice.

_________________
Fast falcons: http://www.youtube.com/watch?v=j3mTPEuFcWk" onclick="window.open(this.href);return false;
twitter: Falco_bike
Facebook: falco.bike

Looks very nice!
Disappointed that it's BB30 though. I'm expecting new 2012 and onward bikes to utilize 386 more often.

_________________
Exp001

It's tube to tube, wrapped. There's some info and video on the Sarto web site. Also: http://italiancyclingjournal.blogspot.c ... shops.html

And in this pre-interbike blurb Sarto says they're working on a 660g frame: http://www.rbaction.net/New-Releases/co ... eview.html

Aren't all of the custom builders doing the same? Calfee, Crumpton, Guru, Parlee, Spin, Strong, Kish, Serotta, Berk...

_________________
http://djconnel.blogspot.com/
Fuji SL/1
Send your data to Weight Weenie listings!

If they're all doing the same custom spec'ing of tubes & geometries per customer, which will essentially determine stiffness, comfort & weight, what is beginning to differentiate them besides price? What would make a potential customer... say gumgardner for example since he's the most relevant and known potential custom-customer here right now... choose one over the other?

Finishes?
Details?
Customer service?
Turn-around time?
A fresh batch of homemade cookies custom made to avoid any allergies?
A personal tour of the best cycling roads in France that have not been featured in Le Tour yet?

_________________
Exp001

Price list: http://tinyurl.com/sartopricelist2011

20% off all prices except the Squadra Corse until Dec 15 2011

Quality, aesthetics, philosophy, communication.

Same as with steel.

_________________
http://djconnel.blogspot.com/
Fuji SL/1
Send your data to Weight Weenie listings!