HOT: Active* forum members generally gain 5% discount at starbike.com store!
Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Articles FAQ Contact About




Post new topic Reply to topic  [ 47 posts ] 
Go to page Previous  1, 2, 3, 4  Next
Author Message
 Post subject: Re: Dati 194/64gr hub
PostPosted: Thu Jul 07, 2011 4:08 pm 
Offline

Joined: Wed Apr 01, 2009 12:43 pm
Posts: 41
Location: Ireland
I purchased a set of these hubs in green and paired them with DT Comp Spokes, Prolock nipples and some chinese carbon clinchers from ebay. Pictured here:
viewtopic.php?f=3&t=89393&p=776015#p776015

I built them radial on the front and rear NDS radial/DS 2x Cross and had my local bike shop tension the spokes for me. I've done about 200 miles on them so far on pretty rough roads and find them great, no problems at all. One thing I did notice is when you stop pedaling at speed the hubs almost sound like there screaming the clicks are happening so fast, takes a bit of time getting use to. The hubs are very smooth and roll well.

Reading from the above comments should I have built the rear DS just 1X crossed instead of 2X crossed?


Top
 Profile  
 
 Post subject: Re: Dati 194/64gr hub
PostPosted: Sat Jul 16, 2011 8:39 pm 
Offline

Joined: Wed Apr 01, 2009 12:43 pm
Posts: 41
Location: Ireland
anyone?

Reading from the above comments should I have built the rear DS just 1X crossed instead of 2X crossed?


Top
 Profile  
 
 Post subject: Re: Dati 194/64gr hub
Posted: Sat Jul 16, 2011 8:39 pm 


Top
  
 
 Post subject: Re: Dati 194/64gr hub
PostPosted: Sat Jul 16, 2011 8:54 pm 
Offline

Joined: Wed Sep 05, 2007 2:02 pm
Posts: 328
If you had wanted to squeeze out the last bit of DS spacing you could have laced 1x DS elbows out.

Could have, Not should have.


Top
 Profile  
 
 Post subject: Re: Dati 194/64gr hub
PostPosted: Sat Jul 16, 2011 9:53 pm 
Offline
User avatar

Joined: Sat Apr 09, 2011 11:29 pm
Posts: 767
Location: Springdale, AR
Garrett,

I will NOT recommend you buying Rotaz hubs and Niobium rims cause that would irritate Mackers.

Stu

_________________
Specialized Allez 06' "Rain Bike" 21.50lbs
Neuvation F100 11' "Road Bike" 16.80lbs
Specialized Tarmac Pro 11' "WW Bike" 14.25lbs


Top
 Profile  
 
 Post subject: Re: Dati 194/64gr hub
PostPosted: Sun Jul 17, 2011 11:08 am 
Offline

Joined: Wed Apr 01, 2009 12:43 pm
Posts: 41
Location: Ireland
StuTheWeak wrote:
Garrett,

I will NOT recommend you buying Rotaz hubs and Niobium rims cause that would irritate Mackers.

Stu


Thanks for your input...!


Top
 Profile  
 
 Post subject: Re: Dati 194/64gr hub
PostPosted: Sun Jul 17, 2011 4:07 pm 
Offline
User avatar

Joined: Tue Sep 28, 2004 7:39 am
Posts: 1431
StuTheWeak wrote:
Garrett,

I will NOT recommend you buying Rotaz hubs and Niobium rims cause that would irritate Mackers.

Stu


Stu seems like your disc is stuck to the words rotaz and niobium. you keep repeating them over and over in every thread you get the chance to post.

seems like your irritating alot of people on this forum, not just Mackers...

_________________
██ MARTINI bike


Last edited by ferrarista on Sun Jul 17, 2011 7:53 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Dati 194/64gr hub
PostPosted: Sun Jul 17, 2011 5:15 pm 
Offline

Joined: Sat Oct 10, 2009 7:13 am
Posts: 875
Location: 93306
You weigh 140? Better get a 36 spoke rear hub/rim combo! :smartass:
:lol:


Top
 Profile  
 
 Post subject: Re: Dati 194/64gr hub
PostPosted: Sun Jul 17, 2011 5:42 pm 
Offline
User avatar

Joined: Tue Mar 08, 2005 10:01 pm
Posts: 662
Location: New Hampshire
StuTheWeak wrote:
Garrett,

I will NOT recommend you buying Rotaz hubs and Niobium rims cause that would irritate Mackers.

Stu

Keep this sort of sniping in private, please. It adds nothing to the discussion, is rude to the posters involved in the thread, and can have the side effect of making you sound like a bit of a jerk.


Top
 Profile  
 
 Post subject: Re: Dati 194/64gr hub
PostPosted: Thu Jul 21, 2011 8:24 am 
Offline
User avatar

Joined: Sat Oct 23, 2010 10:07 pm
Posts: 147
Location: San Mateo, California
wassertreter wrote:
Does anyone know the bearing size(s) for the Dati hubs?

For the bikehubstore "SuperLight" rear hubs the bearings are spec'd

Quote:
Four sealed Enduro bearings (3 x 6802, 1 x 6902)


Wondering if the Dati one saves the weight in the bearings (smaller sizes) or elsewhere.



Yes can anyone please verify? Also How are the bearings used in this hub compared to the bearing size used in the C-4 and tune 170 hubs?


Top
 Profile  
 
 Post subject: Re: Dati 194/64gr hub
PostPosted: Thu Jul 21, 2011 11:16 am 
Offline

Joined: Wed Sep 01, 2010 1:08 am
Posts: 97
Location: North Carolina
Timebandit415 wrote:
wassertreter wrote:
Does anyone know the bearing size(s) for the Dati hubs?

For the bikehubstore "SuperLight" rear hubs the bearings are spec'd

Quote:
Four sealed Enduro bearings (3 x 6802, 1 x 6902)


Wondering if the Dati one saves the weight in the bearings (smaller sizes) or elsewhere.



Yes can anyone please verify? Also How are the bearings used in this hub compared to the bearing size used in the C-4 and tune 170 hubs?



DATI Bearings:

EZO (Japanese)

Front 6800 (19*10*5mm)*2pcs

Rear 6801(21*12*5mm)*1pcs
6901(24*12*6mm)*2pcs
6802(24*15*5mm)*1pcs


Top
 Profile  
 
 Post subject: Re: Dati 194/64gr hub
PostPosted: Thu Jul 21, 2011 1:56 pm 
Offline
Formerly known as wassertreter

Joined: Tue Apr 12, 2011 8:08 am
Posts: 1930
Location: Pedal Square
Cheers sbh1973!

Seeing it now on BHS -- was I just being ignorant?

_________________
Bikes: Raw Ti, 650b flatbar CX


Top
 Profile  
 
 Post subject: Re: Dati 194/64gr hub
PostPosted: Fri Jul 22, 2011 6:48 am 
Offline

Joined: Wed Dec 17, 2008 5:39 pm
Posts: 207
I have two sets of kinlin rims built on similar hub : circus monkey/dixi @ 78gr/224gr.

A set has over 7000km with some rain and the bearing are still very smooth (like new to be honest).

I've purchased a third set for my CX bike.


Top
 Profile  
 
 Post subject: Re: Dati 194/64gr hub
PostPosted: Wed Oct 03, 2012 8:33 pm 
Offline

Joined: Sat Apr 18, 2009 8:59 am
Posts: 542
Location: Surrey UK
So I was pretty happy with these hubs till now.
They got just above 2.5k m I'm 200lb.
First issue, the creaking noise. Smaller bearing in the free hub body was completely smashed.
Did replace it, but creaking was still there.
Today I looked inside once again and found that one of the pawls was broken, then found another surprise, the spindle was broken as well :o

Somebody could say, coincidence, but one of the members of other forum had similar issue with this hub.
His pictures will tell you the story:
Mileage about 3k m, he's about 171lb.
Firstly that's what he found:
https://picasaweb.google.com/carloz.car ... 3704821970" onclick="window.open(this.href);return false;"

That was the next discovery:
https://picasaweb.google.com/carloz.car ... 7210044434" onclick="window.open(this.href);return false;"

Coincidence? For me it's just a very bad quality.
Hope that will help others to avoid the similar problems with these hubs. Just pick something else :)

_________________
Cervelo R5 VWD 5637g/12.43lb
Pronghorn XC SW Race 8284g/18.26lb


Last edited by 1415chris on Wed Oct 17, 2012 8:37 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Dati 194/64gr hub
PostPosted: Thu Oct 04, 2012 12:28 am 
Offline

Joined: Sun Jul 17, 2011 6:34 am
Posts: 158
+1
I was also happy with them until 6000 km when the freehub inner bearing collapsed.
PITA to get the bearing out, ended up replacing the whole freehub assembly.


Top
 Profile  
 
 Post subject: Re: Dati 194/64gr hub
Posted: Thu Oct 04, 2012 12:28 am 


Top
  
 
 Post subject: Re: Dati 194/64gr hub
PostPosted: Thu Oct 04, 2012 1:15 am 
Offline

Joined: Thu Sep 27, 2012 6:06 pm
Posts: 39
Can anyone confirm that this has 19mm drive side spacing? I've seen conflicting data


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 47 posts ] 
Go to page Previous  1, 2, 3, 4  Next


Who is online

Users browsing this forum: Bing [Bot], Google [Bot], jo.k, Yahoo [Bot], zander and 46 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

It is currently Tue Sep 02, 2014 9:10 am

All times are UTC + 1 hour




Advertising   –  FAQ   –  Contact   –  Convert   –  About

© Weight Weenies 2000-2013
hosted by starbike.com


How to get rid of these ads? Just register!


Powered by phpBB