Few bits after anodising



Uploaded with [URL=http://imageshack.us]Im

_________________
Not exactly pure Weightweenie.... but still crazy enought to hunt every possible gram (used to be, but still like reasonably light bikes )

- LITESPEED Obed

- STORCK Scenario Team

i looked into the tune cranks but was able to find nothing but poor reviews plus the cost factor too drove me off. i read the extralite wasn't very stiff but for lightweight riders it wasn't much so i went that route.

are you going with the raceface cranks for looks? Wouldn't a set of sram xo cranks be lighter and stiffer?

To be really honest about Tune and Extralite, yes they aren´t stiff a Tune is quite expensive because of the Sixpack BB...And I want some change and for now I´m not that much into weight hunting as I was some time ago I want to have original unique bike under 9kg, I don´t need superlightweight - ride once repair twice rocket ... There´s no problem for me to built 6kg bike, but I don´t see any reason to do that

And about RF and XX cranks, don´t like carbon that much, wanted 2 chinrings setup and when I found out that TA specialities and FRM makes 40/27 double chainring for that ridiculous 80/120 BCD the RF was the right choice, yes, they´re maybe not as light as XX but waaaay more beatiful for sure!

_________________
Not exactly pure Weightweenie.... but still crazy enought to hunt every possible gram (used to be, but still like reasonably light bikes )

- LITESPEED Obed

- STORCK Scenario Team

after folding a chainring in a race i realized a 33g 42t chainring was way to light. i also snapped a one piece seat/post combo descending after doing a series of drops off railroad ties!

there is a point of to light for rough riding i do agree

Not a weenie stuff... but pure jewell it is!



Uploaded with ImageShack.us

_________________
Not exactly pure Weightweenie.... but still crazy enought to hunt every possible gram (used to be, but still like reasonably light bikes )

- LITESPEED Obed

- STORCK Scenario Team

It is, but how about some other than Ti/pewter accents? Some black would look good perhaps?

Say Hi to German champ pictured a page back I love these dogs!

Chris.

_________________
MSC Koncept Carbon Di2 - 6955g
Leichtkraft Team Carbon - 6868g.

There will be lot of black and pewter already is on front and rear Chris King Iso

next few parts



Uploaded with ImageShack.us

_________________
Not exactly pure Weightweenie.... but still crazy enought to hunt every possible gram (used to be, but still like reasonably light bikes )

- LITESPEED Obed

- STORCK Scenario Team

Still waiting for new cranks.. FRM rings on the way... and finally Hope Race assembled (Gold Stem will be black)



Uploaded with ImageShack.us

_________________
Not exactly pure Weightweenie.... but still crazy enought to hunt every possible gram (used to be, but still like reasonably light bikes )

- LITESPEED Obed

- STORCK Scenario Team

i was considering the hope's but ordered the kcnc.. hope i didn't make the wrong choice!

Race Face Turbine 2011 180mm arms with FRM 40/27 chainrings



Uploaded with ImageShack.us

_________________
Not exactly pure Weightweenie.... but still crazy enought to hunt every possible gram (used to be, but still like reasonably light bikes )

- LITESPEED Obed

- STORCK Scenario Team

Finally done... complete bike as pictured 8.91kg (running Notubes with 220g of sealant)

_________________
Not exactly pure Weightweenie.... but still crazy enought to hunt every possible gram (used to be, but still like reasonably light bikes )

- LITESPEED Obed

- STORCK Scenario Team

One of my favorite hardtails ever.

_________________
Wilier Cento Uno
Colnago Master X-light
Wilier 18carati

very nice!!!

where did you buy the race face turbine crank?

_________________
http://www.hackracer.com/

RF are from Chainreactioncycles.com

_________________
Not exactly pure Weightweenie.... but still crazy enought to hunt every possible gram (used to be, but still like reasonably light bikes )

- LITESPEED Obed

- STORCK Scenario Team

Nice bike tjk. Can you comment on the Kilo fork? I couldn't find any feedback

_________________
----
power2max