HOT: Active* forum members generally gain 5% discount at starbike.com store!
Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Articles FAQ Contact About




Post new topic Reply to topic  [ 47 posts ] 
Go to page Previous  1, 2, 3, 4  Next
Author Message
 Post subject: Re: Dati 194/64gr hub
PostPosted: Fri Jun 24, 2011 11:44 pm 
Offline

Joined: Wed Sep 05, 2007 2:02 pm
Posts: 312
As has been mentioned before, AC/Chin Haur measures from the outsides of the flanges.


Top
 Profile  
 
 Post subject: Re: Dati 194/64gr hub
Posted: Fri Jun 24, 2011 11:44 pm 


Top
  
 
 Post subject: Re: Dati 194/64gr hub
PostPosted: Sat Jun 25, 2011 12:49 am 
Offline
User avatar

Joined: Sun Jun 12, 2005 10:56 am
Posts: 3172
Location: New Zealand
At Stu:
I've pulled mine apart and the axel strength won't be an issue, I think. Holding them up against a set of ACs, the dati has better rear hub spacing (have both hubs here now).

_________________
Used to race....got too wrinkly and old ;) Updated: Racing again! Thought this was unlikely! Eventually, I may even have a decent race!


Top
 Profile  
 
 Post subject: Re: Dati 194/64gr hub
PostPosted: Sat Jun 25, 2011 3:16 am 
Offline
User avatar

Joined: Sat Apr 09, 2011 11:29 pm
Posts: 767
Location: Springdale, AR
theremery wrote:
At Stu:
I've pulled mine apart and the axel strength won't be an issue, I think. Holding them up against a set of ACs, the dati has better rear hub spacing (have both hubs here now).


Can you drill me a 36h variant...lace the rear to a 36h Niobium with DT Revolutions and a 28h front...I'd very much like that.

That would be the ticket to a sub-1400g clyde wheelset provided the axle is robust enough.

_________________
Specialized Allez 06' "Rain Bike" 21.50lbs
Neuvation F100 11' "Road Bike" 16.80lbs
Specialized Tarmac Pro 11' "WW Bike" 14.25lbs


Top
 Profile  
 
 Post subject: Re: Dati 194/64gr hub
PostPosted: Sat Jun 25, 2011 7:27 am 
Offline
User avatar

Joined: Sun Jun 12, 2005 10:56 am
Posts: 3172
Location: New Zealand
You need to contactthem and see if you can get a custom set drilled (seems feasable). I'd go edge lite for a bigger bloke tho.......and go 24 28 unless you are over 100kg.

_________________
Used to race....got too wrinkly and old ;) Updated: Racing again! Thought this was unlikely! Eventually, I may even have a decent race!


Top
 Profile  
 
 Post subject: Re: Dati 194/64gr hub
PostPosted: Tue Jun 28, 2011 3:47 pm 
Offline

Joined: Fri May 01, 2009 8:48 pm
Posts: 95
Will the Dati freehub body work with a SRAM cassette? Anyone using these yet, what are your impressions?


Top
 Profile  
 
 Post subject: Re: Dati 194/64gr hub
PostPosted: Thu Jun 30, 2011 10:30 am 
Offline

Joined: Fri Feb 11, 2011 4:10 pm
Posts: 8
chiltonp wrote:
Will the Dati freehub body work with a SRAM cassette? Anyone using these yet, what are your impressions?


I also would like to know, compared with the other Taiwanese hub manufacturers


Top
 Profile  
 
 Post subject: Re: Dati 194/64gr hub
PostPosted: Thu Jun 30, 2011 11:51 am 
Offline

Joined: Wed Sep 01, 2010 1:08 am
Posts: 96
Location: North Carolina
According to the manufacturer, the DATI freehub is SRAM compatible. I've sold about 40 sets over the past six months and would imagine at least some of my customers are using SRAM and not Shimano. Feedback has been good and so far there have been no reported problems. They seem to be a little more refined than the other hubs I sell (and they cost a lot more, too).

Below are the thoughts of one builder who bought 11 sets from me. I asked him for some feedback that I could share with other customers, because I haven't used them myself.

(February 7 - after first build)

I built a pair proto-type wheels using your hubs, 38mm tubular rims from China, Sapim CX-Ray spokes and Sapim alloy nipples. They came in at 1200g exactly. I took the 38mm wheels with your rims to our season opener today and the first person who saw them insisted on buying them on the spot. I was hoping to use them to sell more, but I figured what the heck.

The hubs look really slick and were well received. I have never seen a hub that is counter-sunk for spokes in the way those are, essentially dictating the build. I did 2-cross on the left rear but will build subsequent wheels radial on the left rear.


May 15 (after building up several sets)

As you are probably aware, the holes are chamfered in a way that seem to dictate how the wheels are to be laced. That is, radial on the front and NDS rear and crossed on the DS rear. The first few sets I built I ordered the spokes without noticing how the way the holes chamfered. I built the NDS 2-cross because that the length of spoke I purchased was for that pattern. The build looked good regardless and I continue to have only compliments on those wheels. All subsequent pairs I have build as the hubs dictate. Knowing that the champhers are there, and seeing the spoke heads seated as designed looks really sweet. But building the NDS crossed, looks good as well, does not appear if something is amiss and has held up well in the pairs that I have built with crossed NDS's.

_________________
www.bikehubstore.com


Top
 Profile  
 
 Post subject: Re: Dati 194/64gr hub
PostPosted: Thu Jun 30, 2011 4:54 pm 
Offline

Joined: Fri Feb 11, 2011 4:10 pm
Posts: 8
Interesting thanks


Top
 Profile  
 
 Post subject: Re: Dati 194/64gr hub
PostPosted: Sat Jul 02, 2011 8:22 pm 
Offline
User avatar

Joined: Tue Jan 23, 2007 12:36 am
Posts: 150
Location: Belgium
Does anybody know if they sell these unbranded ?


Top
 Profile  
 
 Post subject: Re: Dati 194/64gr hub
PostPosted: Tue Jul 05, 2011 1:58 pm 
Offline

Joined: Wed Dec 10, 2008 2:23 am
Posts: 55
So is it okay to lace 2x DS/NDS on the rear?


Top
 Profile  
 
 Post subject: Re: Dati 194/64gr hub
PostPosted: Wed Jul 06, 2011 1:52 am 
Offline
User avatar

Joined: Thu Jul 08, 2010 2:20 am
Posts: 33
Location: SC, USA
I just laced up a set to some Kinlin 30mm rims in a 2X DS/NDS without any problems. I only have about 100 miles on them, but I haven't had any problems thus far.

The NDS holes are countersunk the deepest on the outer side of the flange, implying that they should be laced radially. However, there is a slight countersink to the holes on the inner side of the flange that worked well enough. Again, I didn't have any problems (used Sapim Lasers).

_________________
My Flickr Photostream


Top
 Profile  
 
 Post subject: Re: Dati 194/64gr hub
PostPosted: Wed Jul 06, 2011 6:35 am 
Offline

Joined: Wed Dec 10, 2008 2:23 am
Posts: 55
I was thinking of building it with radial on the NDS since the hub is made for that. Will i notice a big difference if I lace 2x vs radial NDS? By the way, what is the weight for the kinlin 30mm wiht the dati's? Did you use 12mm alloy or brass? THanks


Top
 Profile  
 
 Post subject: Re: Dati 194/64gr hub
PostPosted: Wed Jul 06, 2011 2:29 pm 
Offline
User avatar

Joined: Thu Jul 08, 2010 2:20 am
Posts: 33
Location: SC, USA
I'm not too sure about the differences (other than stiffness) if you were to lace them radially. You may want to check in the wheelbuilding thread for a better answer from a more knowledgeable wheelbuilder.

The total weight for the wheelset came in at 1436 g, with the front being 634 g and the rear 802 g. I went with 12 mm Sapim brass nipples for the added durability and value.

_________________
My Flickr Photostream


Top
 Profile  
 
 Post subject: Re: Dati 194/64gr hub
PostPosted: Thu Jul 07, 2011 2:24 pm 
Offline

Joined: Wed Apr 13, 2011 9:51 pm
Posts: 61
I have a set laced 2x NS/NDS in the rear and I'm running it with a SRAM Red 11-26 cassette without any problems.


Top
 Profile  
 
 Post subject: Re: Dati 194/64gr hub
PostPosted: Thu Jul 07, 2011 2:56 pm 
Offline
Formerly known as wassertreter

Joined: Tue Apr 12, 2011 8:08 am
Posts: 1747
Location: Pedal Square
Does anyone know the bearing size(s) for the Dati hubs?

For the bikehubstore "SuperLight" rear hubs the bearings are spec'd

Quote:
Four sealed Enduro bearings (3 x 6802, 1 x 6902)


Wondering if the Dati one saves the weight in the bearings (smaller sizes) or elsewhere.

_________________
Bikes: Raw Ti, 650b flatbar CX


Top
 Profile  
 
 Post subject: Re: Dati 194/64gr hub
Posted: Thu Jul 07, 2011 2:56 pm 


Top
  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 47 posts ] 
Go to page Previous  1, 2, 3, 4  Next


Who is online

Users browsing this forum: cybernck, drchull, Nezonic and 46 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Dati hubs/Campag 11s compatibility issues?

in Road

liam7020

2

404

Thu May 16, 2013 6:14 pm

liam7020 View the latest post


It is currently Fri Apr 18, 2014 1:31 am

All times are UTC + 1 hour




Advertising   –  FAQ   –  Contact   –  Convert   –  About

© Weight Weenies 2000-2013
hosted by starbike.com


How to get rid of these ads? Just register!


Powered by phpBB