Hi,
Could anybody give the height of the Prologo Scratch measured from the low part of the dip in the saddle and the very bottom of the rails.

Thanks

Pretty darn close to 50mm (Scratch Nack Pro) as seen on my bike (click below). The Nack version has carbon rails which may be a millimeter or two thicker.

I thought it was one of the lower profile saddles I could get but compared to my Selle Italia SLR Team that I have on another bike its height is at least 1-1.5 cm greater. Plus it's not as flat as the Selle Italia so I end up sitting a bit higher, meaning I didn't end up with quite as much seatpost showing as I thought i was going to have. That's ok though, because I completely buried the LTD on the Dorico LTD seatpost, rather than cutting off the just the D like I thought I'd end up doing. Still looks good on a traditional build I think. I'm assuming you're trying to calculate how much seatpost you might have showing on a new build or something?

_________________
My Colnago C59
My Special Colnago EPQ

Sounds like an ISP concern though .. ?

Could be, but limerick23 doesn't say why he wants to know, just asks the dimension. Limerick23, are you considering a frame with an integrated seatpost or are you just trying to determine how things might look aesthetically?

_________________
My Colnago C59
My Special Colnago EPQ

Its to get a lower saddle as seatpost is maybe a tad too low, so for aesthetic.

I had Prologo Scratch. Its 5 cm tall in the front clamp area. Liked it a lot! Looks great!!! (see i n my link pics)
Now I have Scratch Nack and its 4,5 cm tall and a litlle harder. Like it.

_________________
EX Colnago C50
TREK Madone 5.9 SL #7

The Nago Evo is more comfortable