why not ? carbon wheels from china !?

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

Guymk
Posts: 77
Joined: Sun Oct 17, 2010 1:44 pm

by Guymk

I would definitely like to hear about these wheels after they have been heavily ridden.

User avatar
bobsled
Posts: 58
Joined: Wed Sep 29, 2010 5:21 pm
Location: So. Cal.

by bobsled

LouisN wrote:I think a lot of members here will want to hear about these wheels, used and abused. And how they hold up the (long) road.


Louis :)


I think it would only be fair to give an unbiased review after showdown and his teammates get some miles on them and see how they hold up. Please, please, pretty please.

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



User avatar
showdown
Posts: 230
Joined: Fri Sep 17, 2010 4:48 pm

by showdown

For sure I'll report back with all the details, good and bad once we've taken them to task.

Unfortunately there is still a TON of snow in Chicago and it was 10 degrees fahrenheit this week so that report may have to wait a bit... ;)

Our first race is March 20th, and then we race pretty much 2x a weekend through October (road season). The spring races are over cobbled roads and terrible pavement so it should be a good test of the wheels.

Anyhow... I have two more wheels to build (the 20mm's) and then I'm done and I never want to see an other rim or spoke in my life. (11 sets of wheels had to be built by me, ugh)

User avatar
LouisN
Posts: 3508
Joined: Mon Feb 19, 2007 3:44 am
Location: Canada

by LouisN

showdown wrote:Anyhow... I have two more wheels to build (the 20mm's) and then I'm done and I never want to see an other rim or spoke in my life. (11 sets of wheels had to be built by me, ugh)


So, you can give us a review of the finish quality, and how they build up:
ERD at least. Even ?
Are they " round "?
Did you have to use different spoke lenghts, or ....
How do they hold tension ? Of the whole "bunch", no hole "failed" ?


Louis :)

dmotoguy
Posts: 196
Joined: Tue May 27, 2008 8:59 pm
Location: Portland, Oregon
Contact:

by dmotoguy

LouisN wrote:
showdown wrote:Anyhow... I have two more wheels to build (the 20mm's) and then I'm done and I never want to see an other rim or spoke in my life. (11 sets of wheels had to be built by me, ugh)


So, you can give us a review of the finish quality, and how they build up:
ERD at least. Even ?
Are they " round "?
Did you have to use different spoke lenghts, or ....
How do they hold tension ? Of the whole "bunch", no hole "failed" ?


Louis :)


ERD - Even enough that I didn't have any problems with spoke length.

Round - Sort of, There are multiple seams around the rims that are visible/you can feel with your finger and the wheels are not extremely round..especially around the valvestem and they are not the easiest build ever.. but you can get them sorted.

I've built two sets of wheels with the 20mm rims, I'm riding a set today for the first time and my teammate is riding the other set.. I'll update later.

I do agree that they are not worth it, I'm never going to buy them unless I can find a supplier with much nicer product.. or stick with the high-end. :)

User avatar
showdown
Posts: 230
Joined: Fri Sep 17, 2010 4:48 pm

by showdown

My 20mm tubular rims came from ArchTecks (sp?) and they are beautiful.

The erd is even all the way around and 12mm nipples were just perfect.
The rim was round and true as can be and stayed that way during the entire build
I built the rears only so far but I went with a 2x pattern on both sides and all the drive spokes were the same and the non-drive were the same...
The rim held tension without any trouble. He 20mm have a max load of 130kgf and were able to sustain that without issue.
the finish on the 20mm's is beautiful. We went with matte clearcoat and it's even and pristine all the way around. The brake track is smooth and even and the tire bed is as it should be- there is a recess for the tire seam and even one at the valve hole for the bulge on the tire...


No hole on any of the 22 rims I've built has failed. No hole has been off-center or drilled poorly, none of the holes have uneven nipple beds.

All things considered, these rims are really quite stunning. Were they to cary the FFWD label, folk would pay 2x as much for them, were they to cary the Colnago label people would bay 5x as much...

Despite the fact that I'm totally burnt out on wheelbuilding right now, I would buy them again. We received a very generous discount for buying in bulk so all totaled, hubs, DT aerolite spokes & nipples, rims, valve extenders, skewers and labor costs (I ain't doin it for free!) the average price of a set of carbon wheels (keep in mind some were more expensive like the clinchers or the 88mm wheels) comes to about $550.

$550.

Add a cassette and conti tires and a complete ready-to-ride wheelset comes to about $700.

And like I said, when I get some miles on them I'll report back...

athos
Posts: 43
Joined: Fri Apr 11, 2008 8:40 pm

by athos

Are the spoke holes offset? I want to do a triplet lacing pattern on a 24 hole Archteks 20 mm rim with Record 32 hole hub.

Same question for the Hongfu rims?

User avatar
showdown
Posts: 230
Joined: Fri Sep 17, 2010 4:48 pm

by showdown

Guys, you do know that the internet, aside from delivering us copious amounts of pornography, both of the titillating kind as well as the bike kind can in fact be used to do research...

I'm not saying, I'm just sayin'

User avatar
michel2
Posts: 1144
Joined: Mon Jan 10, 2005 10:47 am
Location: somewere floating between here and the other side

by michel2

love your work! showdown

Guymk
Posts: 77
Joined: Sun Oct 17, 2010 1:44 pm

by Guymk

Looking forward to hearing how these stand up after being being raced.

User avatar
LarsEjaas
Posts: 239
Joined: Sun Jan 21, 2007 10:52 am
Location: Aarhus, Denmark

by LarsEjaas

I bought a set of 60 mm. carbon clinchers from Miracle Trade in August.

They unfortunately was delayed and I didn't get the until early January. I was actually quite impressed with their build quality. The hubs was REALLY smooth and the the wheels was DEAD straight.

However, they were WAY to heavy!
Miracle Trade claimed a weight of 1610 g. without QR. They weighted in at 1760 gr. and I thought it was to much of a hassle to deal with special brake pads and poorer braking on carbon clinchers, so I sold the wheels and got a set of VERY slightly used Mavic Cosmic carbone sl's at the same price.

I think the Mavic's are better because of the alu. brake track. Weight and aerodynamics are almost similar I think.

My point is that I actually think the wheels where really nice, but to heavy compared to the hassle of dealing with carbon clinchers. I wouldn't hesitate to buy a set of tubular wheels from china, but I really can't see the advantage of riding carbon clinchers (when similar wheels can be found with a alu. brake track).

User avatar
Martin.F
Posts: 781
Joined: Sat May 28, 2005 9:21 pm
Location: Norway, Drammen

by Martin.F

Did you happen to weigh the 20mm tubular rims separatly? I'm really starting to concider a set of 20mm tubulars + bikehubstore.com hubs and some cx-rays. And maybe a set of 88mm tubulars :mrgreen: :lol:

ttc359
Posts: 21
Joined: Fri Mar 25, 2011 4:25 pm
Location: Los Angeles USA

by ttc359

I think what was mentioned above about re-sale value is important, in addition to having some long term relaibility tests on these rims. However, I want to mention that many name brand bicycle parts and frames/forks are made in china and simply branded and sold to us. W/o getting into the extremely long list of major manufacturers (many who are long-standing stalwarts synonymous with "USA"), it is simply bottom line profits that these companies- most recently a brand that starts with Cannon-something or another- are setting up Asian manufacturing plants, having them ship overseas, and puting their stickers on them and marking them up big time. If memory serves me right, even such a premium name as Cervelo's are all, and have always been, made in China. My personal experience, 4 years ago I purchased on Ebay Ti QR's from China for dirt cheap and they have worked flawlessly ever since. They are quality. I also got a digital weighing scale for $7 (yes, $7, including shipping) 2 years ago, has not failed me once and I am extremely happy. Why pay extra for a name brand sticker? If it's good enough for Colnago, it's good enough for me.

aldocg
Posts: 81
Joined: Fri Dec 17, 2010 3:05 am

by aldocg

^ freds can't brag about yishun wheels

Milese
Posts: 224
Joined: Wed Mar 17, 2010 12:04 am

by Milese

aldocg wrote:^ freds can't brag about yishun wheels


Huh?

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Post Reply