The Garmin Edge 500 Thread
Moderator: Moderator Team
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 12
- Joined: Mon Sep 07, 2009 11:33 am
Hello, maybe this is a stupid question but when I have Garmin Edge 500 and SRM wireless then does SRM cadence sensor connects with edge 500?
Hi, i have one question, i have the HRR and Cadence sensor from the edge 305, they work with the edge 500, or i need to buy new for the 500 ?
https://www.instagram.com/banik_kapa/?hl=el
2010 Giant Tcr Advanced
2012 Bmc Slr 01
2016 Scott Foil
2018 Trek Emonda Slr Team Issue
2010 Giant Tcr Advanced
2012 Bmc Slr 01
2016 Scott Foil
2018 Trek Emonda Slr Team Issue
They will work.
Garmin 500 reads my PowerTap cadence.
S73nSarv92 wrote:Hello, maybe this is a stupid question but when I have Garmin Edge 500 and SRM wireless then does SRM cadence sensor connects with edge 500?
Garmin 500 reads my PowerTap cadence.
jmilliron wrote:They will work.
this answer is for me ?
https://www.instagram.com/banik_kapa/?hl=el
2010 Giant Tcr Advanced
2012 Bmc Slr 01
2016 Scott Foil
2018 Trek Emonda Slr Team Issue
2010 Giant Tcr Advanced
2012 Bmc Slr 01
2016 Scott Foil
2018 Trek Emonda Slr Team Issue
When using a course, how do you set how early the turn instructions are given?
Today on my ride it was telling me turn turn left just after I'd turned left.
Today on my ride it was telling me turn turn left just after I'd turned left.
Try creating the course here:
http://bikeroutetoaster.com/
When you go to export it, set Add Course Point Warnings and set the Warning Distance.
banik, yes.
http://bikeroutetoaster.com/
When you go to export it, set Add Course Point Warnings and set the Warning Distance.
banik, yes.
I have from today the edge 500, but I can not configure the powermeter, i went to garmin's menu and i did rescan but nothing.
What exactly should I do to work ???
What exactly should I do to work ???
https://www.instagram.com/banik_kapa/?hl=el
2010 Giant Tcr Advanced
2012 Bmc Slr 01
2016 Scott Foil
2018 Trek Emonda Slr Team Issue
2010 Giant Tcr Advanced
2012 Bmc Slr 01
2016 Scott Foil
2018 Trek Emonda Slr Team Issue
What PM? Is it ANT+?
Make sure the PM is on. Like with my PowerTap PRO+, I have to give the wheel a quick spin to wake it up. Then, at least the first time, run the scan from the Garmin to connect them.
Make sure the PM is on. Like with my PowerTap PRO+, I have to give the wheel a quick spin to wake it up. Then, at least the first time, run the scan from the Garmin to connect them.
jmilliron wrote:What PM? Is it ANT+?
Make sure the PM is on. Like with my PowerTap PRO+, I have to give the wheel a quick spin to wake it up. Then, at least the first time, run the scan from the Garmin to connect them.
Yes it is ANT+
But I guess this is the problem, that i did rescan but do not turn the wheel......
https://www.instagram.com/banik_kapa/?hl=el
2010 Giant Tcr Advanced
2012 Bmc Slr 01
2016 Scott Foil
2018 Trek Emonda Slr Team Issue
2010 Giant Tcr Advanced
2012 Bmc Slr 01
2016 Scott Foil
2018 Trek Emonda Slr Team Issue
-
- Posts: 12
- Joined: Mon Sep 07, 2009 11:33 am
Whats wrong with my Garmin. Its shows wrong training time when I upload my .fit file with Deviceagent to WKO+ ? I have firmware 2.60 and WKO+ shows all time spent training with stops . What I must do ?
Has anyone had an issue with being able to pick up speed (GPS, not wheel sensor), but distance at the start of ride? After turning it on and giving it ample time to locate satellites, I start rolling and am able to immediately register speed. Distance then takes a few minutes before it starts accumulating and I loose some of the distance traveled during the delay. It is a problem that developed a couple of weeks ago after using it without any issues for a year. I thought it may be related to a firmware problem and Garmin customer service said it may be corrupted, but after reinstalling it twice, it still occurs. Any ideas?
updating the fw from 2.80 to 3.00
something went wrong
now I've a "missing software" message and it can start only with a hard reset and after a long beep that's the message
anyone can help?
something went wrong
now I've a "missing software" message and it can start only with a hard reset and after a long beep that's the message
anyone can help?
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Rob81 wrote:updating the fw from 2.80 to 3.00
something went wrong
now I've a "missing software" message and it can start only with a hard reset and after a long beep that's the message
anyone can help?
Same problem here, need help!