Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Mon Sep 26, 2016 10:06 pm
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 99 posts ]  Go to page Previous 1 2 3 4 57 Next
Author Message
PostPosted: Wed Jan 12, 2011 9:54 am 
Offline
User avatar

Joined: Sun Jan 21, 2007 10:52 am
Posts: 259
Location: Aarhus, Denmark
Geoff wrote:
Lars, you already know what I'm going to say, but I'm going to say it anyway: the BB30 SRM for the Cannondale Si crank with SL arms... :D

:D Geoff you are 100% right - and this option is in my wet dreams :mrgreen: - but just to expensive right now.
I am on a set of FSA SRM Gossamer cranks for now - maybe an upgrade later on to the SI Cranks. My new TT rig is on a tight budget so I need to cut some corners here and there (so for now this SiSL option is too expensive for me).

The frame is a Chinese Open Mold similar to the Planet-X Exocet or the Dynatek Lazer (and a dosen other brands). Should have the frame in a few days.
But I guess the Wheels Mfg shims are quite neat - it sure makes it SUPER easy to install BB30 cranks later on.
I was on the other hand hoping the BB's like Rotor and KCNC could be installed easily without any special BB30 tools - would make things easier for me :wink:


Top
   
Posted: Wed Jan 12, 2011 9:54 am 


Top
   
 
PostPosted: Wed Jan 12, 2011 1:31 pm 
Offline
User avatar

Joined: Sat Jun 12, 2004 8:49 am
Posts: 2182
Location: Denmark
They can. The Rotor one uses a standard BB tool, like the ones used for eg. Shimano outboard bearings.


Top
   
PostPosted: Wed Jan 12, 2011 1:54 pm 
Offline
User avatar

Joined: Sun Jan 21, 2007 10:52 am
Posts: 259
Location: Aarhus, Denmark
Mario Jr. wrote:
They can. The Rotor one uses a standard BB tool, like the ones used for eg. Shimano outboard bearings.


Thanks Mario - I think I am going for the Rotor or KCNC - they are just way easier to work with for the home-mechanic 8)


Top
   
PostPosted: Wed Jan 12, 2011 4:43 pm 
Offline
Shop Owner
User avatar

Joined: Sun Feb 06, 2005 4:22 pm
Posts: 3677
Location: Tucson, Az.
The Kcnc is like the Rotor in that it only needs a standard Shimano tool to install it. Actually it needs two of them since you really should tighten both cups against each other at the same time.

_________________
Fair Wheel Bikes

Fair Wheel Blog

Instagram


Top
   
PostPosted: Thu Jan 13, 2011 8:18 pm 
Offline

Joined: Mon Oct 23, 2006 2:56 pm
Posts: 492
Location: Reno, NV
I tried the Wheels MFG on a caad9 with a sram quarq and when fully tightened down(just enough to remove bearing play) it binds up. Does KCNC make a Sram version Madcow?


Top
   
PostPosted: Fri Jan 14, 2011 12:42 am 
Offline

Joined: Tue Jun 23, 2009 10:47 pm
Posts: 227
Picture of the Token version:

http://www.tufonorthamerica.biz/index.p ... ge&pID=918

Uses the full size BB30 bearing and then sleeves down the I.D. to fit 24mm spindle. Seems smart to use a system with the larger bearings if you can.


Top
   
PostPosted: Wed Mar 02, 2011 6:46 am 
Offline

Joined: Sat Nov 22, 2008 11:15 pm
Posts: 670
Anyone know if the Rotor model will work with press fit 30 BB's?


Top
   
PostPosted: Thu Mar 17, 2011 11:13 pm 
Offline
Tinker, Taylor, Tart

Joined: Sat Nov 29, 2008 8:00 pm
Posts: 1839
Location: Sydney, Aus.
ty-ro wrote:
Anyone know if the Rotor model will work with press fit 30 BB's?

I'm keen to know this too - anyone?... :noidea:


Top
   
PostPosted: Fri Mar 18, 2011 5:35 am 
Offline
Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1980
Location: NoVA/DC
i believe Problem Solvers now makes a PF30-24mm adapter similar to the Wheels Mfg one.
Also, they are not compatible with SL-K Light/K-Force Light cranks, as the FSA cranks use a 1mm narrower cup. In a pinch, I attached them to a drill and spun them, cutting 1mm total with a knife and a file. a lathe would be nice.

...doublechecking, the Problem Solvers item is compatible with both bb30 and PF30. Wheels MFg now makes a version for each.


Top
   
PostPosted: Fri Mar 18, 2011 6:26 pm 
Offline

Joined: Tue Mar 14, 2006 2:10 pm
Posts: 4
madcow wrote:
The Kcnc is like the Rotor in that it only needs a standard Shimano tool to install it. Actually it needs two of them since you really should tighten both cups against each other at the same time.


plus you need big force to get the two parts together! the short shimano tools aren't enough. you need longer tools.


Top
   
PostPosted: Sun Mar 20, 2011 8:27 am 
Offline
User avatar

Joined: Sun Jan 21, 2007 10:52 am
Posts: 259
Location: Aarhus, Denmark
schima wrote:
madcow wrote:
The Kcnc is like the Rotor in that it only needs a standard Shimano tool to install it. Actually it needs two of them since you really should tighten both cups against each other at the same time.


plus you need big force to get the two parts together! the short shimano tools aren't enough. you need longer tools.


REALLY? My LBS did it with a couple of standard SHIMANO tools - looks fine to me :noidea:

The manual by the way states that the driveside should be installed with BB30 tools at first - my LBS gave it a couple of gentle tabs with a rubber-mallet (not sure of the english term here?) instead.


Top
   
 Post subject: BB30 -> BSA Converter
PostPosted: Sat Sep 10, 2011 11:16 pm 
Offline

Joined: Sun Sep 19, 2010 10:19 pm
Posts: 395
Looking to using a BSA crank on my new BB30 frame, dont ask me to get a bb30 cranks as its a BSA PM crank, so sticking to it.

Came across:
SRAM Truvativ BB30 to BSA Adapter Kit $45 http://www.wiggle.co.uk/sram-truvativ-b ... apter-kit/
FSA BB30 Conversion Kit $14.63 http://www.wiggle.co.uk/fsa-bb30-conversion-kit/

Are all converter/adapter compatible with majority bb30 frames? Because the design sure doesnt looks the same.


Top
   
PostPosted: Sat Sep 10, 2011 11:33 pm 
Offline
User avatar

Joined: Tue Mar 08, 2005 10:01 pm
Posts: 662
Location: New Hampshire
BB30 is BB30, they're all the same size and dimensions. Any BB30 to BSA adapter will work.


Top
   
PostPosted: Sat Sep 10, 2011 11:38 pm 
Offline
User avatar

Joined: Fri Dec 11, 2009 10:38 pm
Posts: 1606
Location: Welland, Ontario
TruVativ style is correct.

Other example is a regular BB30 bearing kit. Wiggle typo.

_________________
There's sometimes a buggy.
How many drivers does a buggy have?

One.

So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.

http://www.youtube.com/watch?v=GekiIMh4ZkM


Top
   
Posted: Sat Sep 10, 2011 11:38 pm 


Top
   
 
PostPosted: Sun Sep 11, 2011 12:00 am 
Offline
Shop Owner

Joined: Sat Jun 13, 2009 4:02 am
Posts: 1980
Location: NoVA/DC
i like the wheelsmfg bb30 adapters. they're lighter, cheaper, quicker to install or swap around, less likely to creak, and keeps the larger bb30 bearings in the frame.
Image
Image


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 99 posts ]  Go to page Previous 1 2 3 4 57 Next

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. Adapter etap for baum and bb? - Help

[ Go to page: 1 2 ]

in Road

Nejmann

22

792

Tue May 10, 2016 5:25 am

Nejmann View the latest post

There are no new unread posts for this topic. S-Works Tarmac W/ Sram Red Crankset? Adapter Question

in Road

samklee

1

524

Fri Oct 23, 2015 9:38 am

Pottsy View the latest post

There are no new unread posts for this topic. Cannondale BB30 advice please

in Road

Canofale

14

1213

Sat Jun 11, 2016 12:48 am

Skylark View the latest post

There are no new unread posts for this topic. Attachment(s) Gravitas 3.1 Crankset 165/175 110 BB30

in Road

Holiday

0

400

Mon Sep 28, 2015 10:36 am

Holiday View the latest post

There are no new unread posts for this topic. BB30 crankset in a road old frame (Help)

in Road

UncleJohn

5

503

Tue Nov 03, 2015 6:18 pm

UncleJohn View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: Baidu [Spider], defride, flafonta, la rosa, markgoldstein, Mockenrue, MoPho, nlouthan, prototoast, tnc1970, xena and 43 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited