My bike is now 4,22 KG

His best weight was 4,12 kg with aerolite pedals ans short (normal !) mech plate and obies

aerolite is very good but my knees don't support it

I try now long cage with 13 and 15 teeth pulleys



I think to change my handlebar but I m found of round and 42 outside one

Just updated my Cervelo SLC-SL with Sram Red and Rotor 3D and Q Rings and 3T carbon bits
cant wait for next summer

_________________
i like people... i just can't stand assholes

sun is shining so it is time to wake up bikes
my soloist


Uploaded with ImageShack.us

my wife's R3


Uploaded with ImageShack.us

my R3


Uploaded with ImageShack.us

and finaly my R3SL


Uploaded with ImageShack.us

My S3

_________________
www.aromadiff.com

"This is my very first post, on any site...I've been a completive Ultimate Frisbee player, started Road biking 10years ago to cross train for Ultimate. My first purchase and only purchase until now was a steel frame Cevelo Prodege. Over 10years i up graded components as i road more making my bike better. With everything being upgraded, three years ago i started thinking i'll start researching frames. Initially, my first thought was a ti Seven, Kent Ericksen, Strong, Fi, Moots....more Ti bikes because all carbon bikes were looking like race cars, not my style, then came Serotta, Colnago,BMC but still wanted something different and more unique, with the best technology and engineering. After much research over three years, and apparently not talking to the right dealers or googling the right key phases...a local detail and an experienced biker, said how about PARLEE, i said "never heard of it".
Based mainly on his opinion and his description of the bike and the builder, became extremely interested, and thought long and hard in pulling the trigger. I am one to really research so i am 100% convinced that it is the right decision, i actually had not done this in this case. After signing the papers and making the commitment, i then started researching everything. To my amazement, the bike and manufacture meet up to my expectations."


My prodege was all white, simliar to the black one on here.....it would attract alot of attention!!! Is there a demand for steel frame Crevelo Prodeges out there? What would our reads suggest doing with this bike, keep it or sell it?????

my 2010 s2

@ steff,
That saddle/post combo on your R3 SL is bound to be by Berk? Looking awsome!

Steff, what's the stem on your R3SL? Nice bikes, cheers!

-Gregory

_________________
My 2003 Raleigh Team

hello
no this combo was made by a friend and myself
it is 139 gr and i'm very happy with it
I bought seatpost where I 'stuck' the saddle made by my friend with offset and angle i need
I 'stuck' plate in order to stiffen the saddle
after that my friend link all with carbon
https://picasaweb.google.com/s.faignez/ ... 1734479026

this stem in a Nora oversize one
delays were very long but the stem is light (77 gr) and enough stiff and furthermore massive but nice

hello
no this combo was made by a friend and myself
it is 139 gr and i'm very happy with it
I bought seatpost where I 'stuck' the saddle made by my friend with offset and angle i need
I 'stuck' plate in order to stiffen the saddle
after that my friend link all with carbon
https://picasaweb.google.com/s.faignez/ ... 1734479026[/quote]




So, then, done in the best weight weenie fashion! Hat off! I like it a lot and it makes the bike even more beautiful and unique.

5520grams.

That R3SL is super nice

_________________
My bikes:-
- 2011 Boardman MTB Pro HT-10.22kg
- 2011 Lapierre DH 920-17kg

Carbon - Lightens your bike and your wallet
OCBD - Obsessive Compulsive Biking Disorder

Some beautiful bikes in this thread. Here's my R5:



The LBS put the green bar tape on and it's growing on me - all the ladies I've asked say they like it!