Dati 194/64gr hub
Moderator: robbosmans
Just got a set from ebay and scaled them. Weighs 64.6gr and 194.5gr as advertised. My friend has a black set and his ones are even lighter, weighing 62/192gr.
Build quality is just okay, although not comparable to more expensive machined hubs.
I got them at $150 w/shipping, and my friend paid the same, but unfortunately the sellers raised the price significantly. :[
Build quality is just okay, although not comparable to more expensive machined hubs.
I got them at $150 w/shipping, and my friend paid the same, but unfortunately the sellers raised the price significantly. :[
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 854
- Joined: Tue Jul 18, 2006 5:18 am
- Location: Cambridge, New Zealand
- Contact:
do you have dimensions for them?
That will be nice low cost wheelset
-
- Posts: 16
- Joined: Thu Sep 02, 2010 8:38 am
Anyone buildt up a wheelset with these hubs yet?????
If so would you recommend them?
If so would you recommend them?
Raxel wrote:Will use them with chinese 38mm clincher rims I have bought with group buy.
Rims were heavier than I have expected (~450gr), so they will make a ~1370gr clincher wheelset.
Thats a great weight for 38mm clincher.... nice balance of aero & weight.
Tarmac SL3 S-Works 13.75lbs 6.24kg
Jamis Xenith Pro 16.1lbs 7.31kg
Jamis Xenith Pro 16.1lbs 7.31kg
I got a set of these hubs in green yesterday. Here's the measurement I took last night, if you got anything different please let me know.
Using the diagram here http://www.sheldonbrown.com/rinard/spocalc.htm below are the measurements.
Front Hub:
S = 2.6mm
d = 30mm
A = 17mm
WL = 33mm
WR = 33mm
B = 17mm
Rear Hub
S = 2.6mm
dL = 37mm
dR = 50mm
A = 32mm
WL = 32.5mm (Edited - Not 42.5)
WR = 17.5mm (Edited - Not 7.5)
B = 48mm
Regards....!
Using the diagram here http://www.sheldonbrown.com/rinard/spocalc.htm below are the measurements.
Front Hub:
S = 2.6mm
d = 30mm
A = 17mm
WL = 33mm
WR = 33mm
B = 17mm
Rear Hub
S = 2.6mm
dL = 37mm
dR = 50mm
A = 32mm
WL = 32.5mm (Edited - Not 42.5)
WR = 17.5mm (Edited - Not 7.5)
B = 48mm
Regards....!
Last edited by Garret C on Thu Jul 07, 2011 3:44 pm, edited 2 times in total.
I bought a set in black body with red axel ends about 8 months ago for $139US plus postage (to NZ). Sadly, the rims I was to use for the project (60mm carbon clinchers at 960g/pr) have been a bit of a drama so I have not got them built up to RIDEABLE state yet. The bearings are very smooth, I must say. My set have a slight off centre on the spoke holes within the flange (not good) and are about 260g/pr.
Updated: Racing again! Thought this was unlikely! Eventually, I may even have a decent race!
Edit: 2015: darn near won the best South Island series (got second in age
-group)..woo hoo Racy Theremery is back!!
Edit: 2015: darn near won the best South Island series (got second in age
-group)..woo hoo Racy Theremery is back!!
- StuTheWeak
- Posts: 763
- Joined: Sat Apr 09, 2011 11:29 pm
- Location: Springdale, AR
WL = 42.5mm
WR = 7.5mm
I'd be very timid using that rear.
Rotaz weighs more, but I think it has better flange spacing.
WR = 7.5mm
I'd be very timid using that rear.
Rotaz weighs more, but I think it has better flange spacing.
Specialized Allez 06' "Rain Bike" 21.50lbs
Neuvation F100 11' "Road Bike" 16.80lbs
Specialized Tarmac Pro 11' "WW Bike" 14.25lbs
Neuvation F100 11' "Road Bike" 16.80lbs
Specialized Tarmac Pro 11' "WW Bike" 14.25lbs
- StuTheWeak
- Posts: 763
- Joined: Sat Apr 09, 2011 11:29 pm
- Location: Springdale, AR
I'd agree that is pretty awesome flange spacing all things conisdered. Though, the Rotaz is suppose to be identical to American Classic hub flange spacing which is 30mm/20mm. I like it a tad more.
If Dati had a beefy axle and came in 36h...I could be swayed.
If Dati had a beefy axle and came in 36h...I could be swayed.
Specialized Allez 06' "Rain Bike" 21.50lbs
Neuvation F100 11' "Road Bike" 16.80lbs
Specialized Tarmac Pro 11' "WW Bike" 14.25lbs
Neuvation F100 11' "Road Bike" 16.80lbs
Specialized Tarmac Pro 11' "WW Bike" 14.25lbs
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com