Introducing: Parlee Z3 SL. 5,8kg/12.76lbs

Who are you (no off-topic talk please)

Moderator: Moderator Team

User avatar
eigner
Posts: 1119
Joined: Tue Mar 24, 2009 12:36 am
Location: Denmark

by eigner

Parlee Z3 SL (custom geometry)
Image
Image
Image
Image
Image
Image
Image


Frame:Parlee Z3 SL custom geometry.
Fork: EDGE Composites 1.0 Road.
Handlebars: EDGE Composites 420mm.
Stem: EDGE Composites 90mm
Seatpost: EDGE Composites zero setback.
Seatpost clamp: BTP.
Saddle: Tune Speed Needle.

Shifters: Shimano Dura-Ace "DI2" + DURA-ACE Di2 SW7970 satellite shifter.
Front der: Shimano Dura-Ace "DI2"
Rear der: Shimano Dura-Ace "DI2
RD Pulley: Carbon with ceramic bearings.
Cranks: THM Clavicula with THM ceramic bearings, 53/39 fibrelyte carbon chainrings and KCNC bolts.
Brakes: Ciamillo Zero Gravity "Gravitas".
Brakepads: "Lightweight by CarbonSports" (Swissstop).
Brake cables: Alligator i-Links.
Chain: YBN 101sl.

Headset: Extralite "The head 2" with Extralite "Ultra star" expander.
Headset cap: Tune carbon with ti bolt.

Wheels: EDGE Composites 45 clincher on DT190(ceramic) hubs.
QR skewers: "Lightweight by CarbonSports".
Tires and tubes: Vittoria open Corsa Evo CX 320tpi and Vittoria EVO 55.

Pedals: Speedplay Zero Titanium tuned with alu butterflies and ti bolts.
Computer: Garmin EDGE 705 GPS,HR & Cad.
Bottlecages: Arundel mandible*2.
Handlebar Tape: Lizzardskins DSP Race

Weight: ?.?kg / 1?.?lbs




UPDATED PICTURES PAGE 3 and 4
build list: 25. november 2010:
Components:

Frame:Parlee Z3 SL custom geometry.
Fork: EDGE Composites 1.0 Road.
Handlebars: EDGE Composites 420mm.
Stem: EDGE Composites 90mm
Seatpost: AX-Lightness Deadulus.
Seatpost clamp: BTP.
Saddle: Tune Speed Needle.

Shifters: Shimano Dura-Ace "DI2"
Front der: Shimano Dura-Ace "DI2"
Rear der: Shimano Dura-Ace "DI2
RD Pulley: Carbon with ceramic bearings.
Cranks: THM Clavicula with THM ceramic bearings, 53/39 fibrelyte chainrings and KCNC bolts.
Brakes: Ciamillo Zero Gravity "Gravitas".
Brakepads: "Lightweight by CarbonSports" (Swissstop).
Brake cables: Alligator i-Links.
Chain: YBN 101sl.

Headset: Extralite "The head 2" with Extralite "Ultra star" expander.
Headset cap: Tune carbon with ti bolt.

Wheels: EDGE Composites 45 clincher on DT190(ceramic) hubs.
QR skewers: "Lightweight by CarbonSports".
Tires and tubes: Vittoria open Corsa Evo CX 320tpi and Vittoria EVO 55.

Pedals: Speedplay Zero Titanium tuned with alu butterflies and ti bolts.
Computer: Garmin EDGE 705 GPS,HR & Cad.
Bottlecages: Arundel mandible*2.
Handlebar Tape: Lizzardskins DSP Race

Weight: ?.?kg / 1?.?lbs
UPDATED PICTURES PAGE 3 and 4

"Old" pictures and buildlist:
Image
By eigner at 2010-09-02

Image
By eigner at 2010-09-02

Image
By eigner at 2010-09-02

Image
By eigner at 2010-09-02

Image
By eigner at 2010-09-02


Components:
Frame: Parlee Z3 SL custom geometry.
Fork: THM Scapula SP tuned fork.
Cranks: THM Clavicula with THM ceramic bearings, 53/39 fibrelyte chainrings and KCNC bolts.
Headset: Extralite "The head 2" with Extralite "Ultra star" expander.
Headset cap: Tune carbon with ti bolt.
Bottlecages: Tune "wasserträger".
Brakes: Ciamillo Zero Gravity "Gravitas".
Brakepads: "Lightweight by CarbonSports" (Swissstop).
Gruppo: Shimano Dura-Ace DI2.
RD Pulley: Carbon with ceramic bearings.
Handlebars: Pro Stealth Evo and Lizzard skins DSP race tape.
Seatpost: AX-Lightness Deadulus.
Seatpost clamp: BTP.
Saddle: Selle Italia Teknologika.
Brake cables: Alligator i-Links.
QR skewers: "Lightweight by CarbonSports".
Pedals: Speedplay Zero Titanium tuned with alu butterflies and ti bolts.
Chain: YBN 101sl.
Wheels: EDGE 45 clincher on DT190(ceramic) hubs.
Tires and tubes: Vittoria open Corsa Evo CX 320tpi and Vittoria EVO 55.
Computer: Garmin EDGE 705 GPS,HR & Cad.

Weight: 5.8kg / 12.76lbs
Last edited by eigner on Fri Jul 01, 2011 7:36 pm, edited 5 times in total.
Current: Colnago CX Zero Di2 Disc, Cannondale F29 carbon3
Previous: Scott Plasma 3 premium, Parlee Z3SL, Parlee Z4, Argon18 E112, TREK TTX7.0, S-Works Transition, Pinarello F4:13

User avatar
coloclimber
Moderator
Posts: 2943
Joined: Wed Aug 23, 2006 9:11 pm
Location: People's Republic of Boulder

by coloclimber

Looks great. Good choices of components. Especially the wheels. :thumbup:
I wish I could hop over there and help you internalize all the wiring and get the battery off the chainstay. We would save some serious weight.
What do the bar/stem combo weigh?
-Deacon Doctor Colorado Slim

by Weenie


User avatar
eigner
Posts: 1119
Joined: Tue Mar 24, 2009 12:36 am
Location: Denmark

by eigner

I actually wrote an email to Parlee to ask if they could make the frame DI2 ready, but they could not, so it could really be awesome to work with you to get the DI2 sorted out.
The bars are the 110*42mm version. It weigh in at massive 395g, but they rock solid. I will change them to a shorter version next week - that should drop a bit of weight. I have considered getting another stem/bar setup than the pro stealth evo, but I don't know what that should be.


Image
By eigner at 2010-09-02

Picture of the laser etched logos
Last edited by eigner on Fri Sep 03, 2010 12:07 am, edited 1 time in total.
Current: Colnago CX Zero Di2 Disc, Cannondale F29 carbon3
Previous: Scott Plasma 3 premium, Parlee Z3SL, Parlee Z4, Argon18 E112, TREK TTX7.0, S-Works Transition, Pinarello F4:13

BmanX
Posts: 3844
Joined: Thu Nov 10, 2005 5:31 pm

by BmanX

That is a very sexy and amazing build especially with it being Di2.

Great work.
BIG DADDY B FLOW
AERO & LIGHT is RIGHT

Cervelo SLC 5960g/13.13 lbs

User avatar
Tinea Pedis
Posts: 8425
Joined: Sat Mar 14, 2009 6:08 am
Location: Geelong
Contact:

by Tinea Pedis

:shock:

Wowee.

Silly question...but do you still have the Z4? Or did that make way for this incredible build?

User avatar
eigner
Posts: 1119
Joined: Tue Mar 24, 2009 12:36 am
Location: Denmark

by eigner

I traded it with Jonathan and now you can see it in the sales section :wink:
Current: Colnago CX Zero Di2 Disc, Cannondale F29 carbon3
Previous: Scott Plasma 3 premium, Parlee Z3SL, Parlee Z4, Argon18 E112, TREK TTX7.0, S-Works Transition, Pinarello F4:13

GGG
Posts: 138
Joined: Fri Apr 23, 2010 3:40 pm
Location: Western Australia

by GGG

Far out that is fantastic :thumbup: (when I finally finish my Z3 it aint gonna be nearly as hot or as light as that baby)
Current Harem: Sally (Serotta Nove - Ti/C), Peggie (Pegoretti Love #3 - Alu), Speedy Custom Baum (Corretto - Ti)* & Climbing Baum (Corretto - Ti)*

*Lady names just never came to me.

Frisco
Posts: 47
Joined: Sat May 09, 2009 6:23 pm
Location: Bay Area, CA

by Frisco

Great looking frame - how does the ride compare to the old Z4?

musket
Posts: 595
Joined: Fri May 04, 2007 5:27 pm

by musket

Lovely.

Parlee have just introduced a Di2 specific frame option - maybe for when you get your Z1!
Don't be alarmed.

MrIzoard
Posts: 41
Joined: Mon May 24, 2010 4:55 pm
Location: Gothenburg, Sweden

by MrIzoard

Really nice, me like :D

//Ulf L.

User avatar
Roobay
Posts: 1958
Joined: Fri Mar 23, 2007 12:19 pm
Location: On Pave

by Roobay

Whiskey wow wow....
That is a thing of beauty
Great weight seeing as you used Di2
Still it's early days yet give it a couple of months it get below 5.8kgs
Jr
Last edited by Roobay on Fri Sep 03, 2010 2:39 pm, edited 1 time in total.
i like people... i just can't stand assholes

topcar
Posts: 3
Joined: Wed Nov 18, 2009 3:50 am

by topcar

:thumbup: ~~nice bike~~ :lol:

User avatar
Powerful Pete
Moderator
Posts: 4002
Joined: Fri Dec 10, 2004 10:22 am
Location: Lima, Peru and occasionally in the Washington DC area.
Contact:

by Powerful Pete

Very, very nice. Bravo!
Road bike: Cervelo R3, Campagnolo Chorus/Record mix...
Supercommuter: Jamis Renegade...pastatrails.blogspot.com
And you can call me Macktastik Honey Pete Kicks, thank you.

Montana
Posts: 342
Joined: Sat Aug 05, 2006 8:29 am

by Montana

Well Done! Very Nice :thumbup:

by Weenie


gumgardner
Posts: 3553
Joined: Sat Jan 06, 2007 9:47 pm
Location: Pittsburgh

by gumgardner

What's the frame weight?

Post Reply
  • Similar Topics
    Replies
    Views
    Last post