I finally finished my Cervelo SLC build. It has been rebuilt a few times now but this is the almost final version. Main goal will be to have the build just under 13 lbs. So a few small stages to go.

Cervelo SLC 54cm 1170g
3T forks - 342g
Cervelo tune seat post - 145g
FSA Orbit CE headset - 76g
Carbon spacers - 11g
Top cap, bolt and tune gum gum - 13g
F99 stem - 96g
Easton equipe bars - 186g
EDGE 1.45 C with C4 Hubs- 1282g with velo plugs
KCNC 11-23 cassette - 112g
Challenge Latex tubes - 117g for both
Conti Super Sonics tires - 163g and 159g
Zipp Vuma Quads, Fibre-Lyte rings and ceramic bearings - 534g
BB bolts - 23g
Sram Red Levers - 288g
Sram RD - 122g
Dura-Ace FD - 64g
Fizik Anteres - 147g
EE brakes at 197g
Speedplay X2's with Aluminum butterflies and Ward Ti spindles - 126g
KMC X10SL chain 225g
BTP Carbon Cages - 24g for both.
Cage bolts - 4g for 4
Cateye Strada wireless - not sure of the weight.
Omni Racer skewers - 44g
Deda bar tape - 36g
Cervelo SLC SL seat post clamp - 15g
I-Link mini for shift and regular for brake but forgot to weight them but they are stupid light.

_________________
BIG DADDY B FLOW
AERO & LIGHT is RIGHT

Cervelo SLC 5890g/12.98 lbs

Nice bike, i love cervelo frames !!!

_________________
Giant TCR Advanced - Chorus 11s - Fulcrum Racing Zero - FFWD F4R dt240s

www.jabik.gr

what colour velo plugs have you used?

_________________
.::. Taking the hobbits to Isengard since 2001 .::.
My bikes:
Parlee Z3SL: DI2,THM, EDGE, Gravitas and loads more (5,79kg)
S-Works Transition: Sram Red, Xentis and more
Pinarello F4:13: Campagnolo SR11 and Racing Speeds and more (SOLD)

Those Cervelo aero's looks so tight when build up right! - I would love to see your bike with a couple of 808's or similar 80 mm. wheels

_________________
Speed isn't going to kill you. Suddenly becoming stationairy, that is what's gonna get ya'!

@ eigner

I used the yellow plugs with a dab of superglue. It was either that or standard rim tape and since the velo plugs weigh next to nothing and super glue weighs next to nothing it seemed to work out pretty good.

_________________
BIG DADDY B FLOW
AERO & LIGHT is RIGHT

Cervelo SLC 5890g/12.98 lbs

very very nice build.. love the frame too
how do you like the antares?

thanks. I will get the yellow veloplugs for my edge 45's aswell

_________________
.::. Taking the hobbits to Isengard since 2001 .::.
My bikes:
Parlee Z3SL: DI2,THM, EDGE, Gravitas and loads more (5,79kg)
S-Works Transition: Sram Red, Xentis and more
Pinarello F4:13: Campagnolo SR11 and Racing Speeds and more (SOLD)

Very clean.

How did you get the white stripes off?

I had the frame professionally sanded down to expose as much of the UD carbon on the top, seat and down tube as possible then I have the rest of the frame sprayed black. It is hard to see but in the sun and close up, the UD carbon shows up very well and looks awesome next to the UD cabon on the wheels.

_________________
BIG DADDY B FLOW
AERO & LIGHT is RIGHT

Cervelo SLC 5890g/12.98 lbs

Very cool.. who and how much did that cost?

Wow very nice it's how my dream bike would look, you must be proud owning a bike like that..well done.

It is still not complete and will not be complete until it hits 12.99 lbs or 5890g. Until then it will be a work in progress. I have a few items to complete in the next week which should drop the weight down that much and buying a new carbon saddle is not an option yet. And it has to have clinchers wheels.

_________________
BIG DADDY B FLOW
AERO & LIGHT is RIGHT

Cervelo SLC 5890g/12.98 lbs

Stunning!

_________________
ciclismo-espresso.com

Awesome.. 12.99lb goal is impressive..

I halted my project at R3SL at 13.8lbs. I can't imagine getting another pound off without sacrificing durability.

Would love to hear where you got it painted and approx. cost. thanks!

Nice and worthwhile rebuild,its about time i did my SLC SL , some good pointers on yours and weight saving ideas
Cheers
jr

_________________
i like people... i just can't stand assholes