Weight Weenies
* FAQ    * Search    * Trending Topics
* Login   * Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
It is currently Fri Dec 09, 2016 5:07 am
Recently the board software has been updated and there are some known bugs/failures:
- Avatars are currently not being displayed ✔ FIXED
- Tapatalk connection is currently broken ✔ FIXED
- Avatars cannot be uploaded ✔ FIXED

Please note that we will soon do some changes in WW board template design in case to get a fully mobile/desktop responsiveness board!
If you find more errors please post it here: http://weightweenies.starbike.com/forum/viewtopic.php?f=7&t=139062


All times are UTC+01:00





Post new topic  Reply to topic  [ 62 posts ]  Go to page 1 2 3 4 5 Next
Author Message
 Post subject: Di2 tuning
PostPosted: Sun Dec 27, 2009 11:56 pm 
Offline
Moderator
User avatar

Joined: Wed Aug 23, 2006 9:11 pm
Posts: 2878
Location: People's Republic of Boulder
Beside BTP clamps in the shifters the RD can be tuned quite a bit with new pulleys and bolt.

Original DA 7970 pivot bolt is 11 grams
Kronos from FWD is 6 grams.

222 grams to start- tuned to 208
Image

Image

Image

_________________
-Deacon Doctor Colorado Slim


Top
   
 Post subject: Di2 tuning
Posted: Sun Dec 27, 2009 11:56 pm 


Top
   
 
PostPosted: Mon Dec 28, 2009 1:04 am 
Offline

Joined: Sun Dec 28, 2008 2:44 am
Posts: 306
wow...how much did saving those 14 grams cost you? :noidea:


Top
   
PostPosted: Mon Dec 28, 2009 1:28 am 
Offline
User avatar

Joined: Sun Jun 19, 2005 6:43 am
Posts: 3424
Location: Hilly, Hot, and Windy
kenyoncycleist wrote:
wow...how much did saving those 14 grams cost you? :noidea:



:roll:

Really? That's not the point. Why not just tell him he should have gotten Ultegra 'cause it's "good enough"

Starnut

_________________
"Don't pedal harder, pedal faster!"
Q-FACTOR IS A RED HERRING

BB30.COM


Top
   
PostPosted: Mon Dec 28, 2009 1:35 am 
Offline
User avatar

Joined: Wed Oct 31, 2007 10:32 pm
Posts: 8350
Location: Los Feliz, Los Angeles, California
Ummm... break out the Dremel and get to work.
Carbon plates?
Change out the mounting bolt.
You can probably bring it down to ~190g.

_________________
Exp001 || Other projects in the works.


Top
   
PostPosted: Mon Dec 28, 2009 1:56 am 
Offline

Joined: Wed Feb 09, 2005 4:51 am
Posts: 1879
kenyoncycleist wrote:
wow...how much did saving those 14 grams cost you? :noidea:


This is Weightweenies ...! :mrgreen:


Top
   
PostPosted: Mon Dec 28, 2009 2:59 am 
Offline
User avatar

Joined: Tue Mar 08, 2005 10:01 pm
Posts: 662
Location: New Hampshire
But... but... if people spend time reading threads like this, they won't have time to author more first-ever-post "Which wheelset" topics!

My first-ever post here was during a heated debate on the weights of dried tubular glue. Oh, the good ol' days...

I'm still psyched to find out about all the weenie-tuning options available for Di2. Lighter, custom batteries? Custom wiring? Total geeks taking apart and reworking the electric motors? Sunglass-mounted blink-sensitive shifting sensors? Bring it on!


Top
   
PostPosted: Mon Dec 28, 2009 4:03 am 
Offline
Moderator
User avatar

Joined: Wed Aug 23, 2006 9:11 pm
Posts: 2878
Location: People's Republic of Boulder
The rear plate is pretty light to begin with at 5 grams.
Image

A sexy ultra light one didnt save much and wasnt as stiff
Image

I took off the limit screws and B screw and they weigh next to nothing so no real tuning there.

Custom battery is where its at though for real WW savings. 70 grams for a dual cel (size of AA batteries) and plastic shell. I am trying to half that with a half battery and different mounting option. It already lasts way too long for me. I would rather charge it more often (still almost never) and save 35+ grams.
Image

There is not a lot to do with the FD without some custom fabrication
Image

Internal/Extrenal harness can be hacked up a bit to save some grams too. The metal plate is removable and quite heavy.
Image

_________________
-Deacon Doctor Colorado Slim


Top
   
PostPosted: Mon Dec 28, 2009 5:13 am 
Offline
User avatar

Joined: Thu May 04, 2006 4:43 pm
Posts: 5375
Location: Wherever there's a mountain beckoning to be climbed
colo,

Drill out the battery. Less weight, fewer shifts* 8)

* Well, o.k., that might be 0 shifts now, but anywho. Just pick a low enough gear for climbing, and learn to spin as the terrain levels out and goes down. And if your bike catches fire, that will be even more weight savings.


Top
   
PostPosted: Mon Dec 28, 2009 10:13 pm 
Offline
User avatar

Joined: Wed Jan 07, 2009 8:58 pm
Posts: 75
Location: Drenthe, The Netherlands
Hahaha :beerchug:

_________________
Whatever it takes, I'll try!

Chanceloose.tumblr.com


Top
   
PostPosted: Mon Dec 28, 2009 10:14 pm 
Offline

Joined: Fri May 25, 2007 6:43 pm
Posts: 2885
IIRC a lot of the Di2s performance benefit is due to added stiffness and changed profiles of the mechs, at what point does weightweenie tuning turn into missed shifts?


Top
   
PostPosted: Mon Dec 28, 2009 10:41 pm 
Offline

Joined: Tue Nov 01, 2005 9:36 am
Posts: 340
For the battery I would suggest to simply replace the 2 cells, with 2 other, but lighter, cells. Going back to 1 single cell will require a voltage booster, too much of hassle, especially when you aren't an EE.

Take a look here for example: http://www.all-battery.com/li-polyersinglecells.aspx
The lightest option weights only 0.95 grams. But don't shift to often, because the capacity is only 25 mAh :roll: Something a little heavier would be a better choice, for example one with a capacity of 160 mAh weights only 4 grams. For comparision when the orinal cells are of the AA format (14500), the capacity is 900 mAh and the weight is 21 grams a cell. So weight savings with the 160 mAh cells would be: 2*21-2*4=34 grams :thumbup:

And get rid of plastic housing, heat shrink tape is a lot lighter :beerchug:


Top
   
PostPosted: Wed Dec 30, 2009 3:20 am 
Offline
Resident Pro

Joined: Tue Mar 18, 2003 9:42 pm
Posts: 2274
thanks coloclimber for your innovation on this new di2 drivetrain. it will be interesting to see what you can do with the battery as that seems like it is the heaviest of the parts that can be modified. possibly the cables can be changed out too with less durable housing ones?


Top
   
PostPosted: Wed Dec 30, 2009 3:29 am 
Offline

Joined: Fri Jul 17, 2009 4:10 am
Posts: 1146
I would do a custom battery. You can make a small pack and shrink wrap it, but you may have to cut the battery connector and solder in another type of power connector.


Top
   
PostPosted: Wed Dec 30, 2009 3:31 am 
Offline
Moderator
User avatar

Joined: Wed Aug 23, 2006 9:11 pm
Posts: 2878
Location: People's Republic of Boulder
I'm looking into that (smaller cables and junctions) as well. Waterproofness is pretty important.

The FD is frustrating me at the moment. There is a lot of mass but not much you can do about it since its part of the mechanical. The biggest gram savings is in the battery and cable system.

Thanks for all the PMs about volts/wiring/charging etc.
I am definitely no EE- environmental lawyer by trade- so this stuff is way beyond my expertise.

_________________
-Deacon Doctor Colorado Slim


Top
   
Posted: Wed Dec 30, 2009 3:31 am 


Top
   
 
PostPosted: Wed Dec 30, 2009 4:15 am 
Offline

Joined: Tue Mar 21, 2006 12:56 am
Posts: 4907
coloclimber wrote:
Image

Is this the weight fully charged or empty? :lol:


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 62 posts ]  Go to page 1 2 3 4 5 Next

   Similar Topics   Author   Replies   Views   Last post 
There are no new unread posts for this topic. B T P Bike Tuning Parts

in Road

Luc

2

771

Sat Dec 12, 2015 4:37 pm

Luc View the latest post

There are no new unread posts for this topic. SRAM eTAP Tuning?

in Road

ProfessorChaos

11

1373

Sun Nov 27, 2016 12:07 pm

ProfessorChaos View the latest post

There are no new unread posts for this topic. Best place to purchase Ti and Al hardware for tuning?

in Road

Sooperlite

7

911

Sat Sep 24, 2016 6:32 am

Rick View the latest post

There are no new unread posts for this topic. source for domed washer for m6 bolt (deda seatpost tuning)

in Road

pavel

5

410

Fri Jan 29, 2016 10:59 pm

Tenlegs View the latest post


All times are UTC+01:00


Who is online

Users browsing this forum: djel, Google [Bot], Matt28NJ and 21 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited