KCNC Alloy bolts in XTR Crankset

View unanswered posts | View active topics

Board index » Discussion » MTB

KCNC Alloy bolts in XTR Crankset

Moderator: Moderator Team

Page 1 of 1

[ 10 posts ]

Previous topic | Next topic

Author

Message

yumseyo

Post subject: KCNC Alloy bolts in XTR Crankset

Posted: Thu Jun 25, 2009 12:20 am

Joined: Tue May 12, 2009 12:25 am
Posts: 65
Location: San Francisco

Hi All !, has anyone ever installed the KCNC lightweight alloy chainring bolts on a XTR set up? I currently have a set of 5, and it looks like if I shorten the nutsert, I could get them to fit. I would have to order a second set though, but I wanted to see if anyone had any durability problems. :?:

Top

miceden

Post subject: Re: KCNC Alloy bolts in XTR Crankset

Posted: Thu Jun 25, 2009 9:24 am

Joined: Mon Mar 09, 2009 5:38 pm
Posts: 230
Location: Hampshire, UK

If the bolts are too long I guess you're using an XTR 960 crankset...? KCNC do make shorter chainring bolts for single rings... these do fit the XTR960. Cant comment on the durability though...

Top

jmartpr

Post subject: Re: KCNC Alloy bolts in XTR Crankset

Posted: Thu Jun 25, 2009 1:28 pm

Shop Owner

Joined: Thu Apr 17, 2008 1:07 am
Posts: 954
Location: San Juan, Puerto Rico

miceden wrote:

If the bolts are too long I guess you're using an XTR 960 crankset...? KCNC do make shorter chainring bolts for single rings... these do fit the XTR960. Cant comment on the durability though...

KCNC has two types of bolts...SPB004 Compatible with XTR FC-M970 Crank (8.5mm Bolt&6.5mm Nut) and the SPB003 Compatible with XTR FC-M960 Crank (6.5mm Bolt&4mm Nut) and KCNC TK1....so far we haven't had any type of issue with these.

_________________
www.royalbicycles.com

Top

yumseyo

Post subject: Re: KCNC Alloy bolts in XTR Crankset

Posted: Mon Sep 14, 2009 4:50 am

Joined: Tue May 12, 2009 12:25 am
Posts: 65
Location: San Francisco

Well, I can personally recommend NOT to buy the wrong size for you crankset. I filed and ground down my longer KCNC alloy bolts and almost ruined them. I was able to shorten them with a grinding wheel then filing them smooth. But I had a hard time holding them in a pair of vice grips with rubber tips. I ended up scarring some of the sides. If they weren't so darn expensive I would have replaced them with the proper size.

Top

sirshan

Post subject: Re: KCNC Alloy bolts in XTR Crankset

Posted: Fri Dec 18, 2009 2:20 am

Joined: Sun Dec 13, 2009 9:11 am
Posts: 108
Location: Bay Area, California

Where can I buy these bolts by KCNC? I need to add some missing bolts to my outter chainring (XTR M970).

Thanks.

Top

1415chris

Post subject: Re: KCNC Alloy bolts in XTR Crankset

Posted: Fri Dec 18, 2009 10:19 am

Joined: Sat Apr 18, 2009 8:59 am
Posts: 497
Location: Surrey UK

Any clue where you are from?

_________________
Cervelo R5 VWD 5637g/12.43lb
Cannyon Ultimate slx 5592g/12.33lb
Pronghorn XC SW Race 8284g/18.26lb

Top

Gran Sport

Post subject: Re: KCNC Alloy bolts in XTR Crankset

Posted: Fri Dec 18, 2009 9:12 pm

Joined: Sun Mar 01, 2009 6:02 pm
Posts: 160

i purchased a set on ebay back in august from yan_kelly, they seem to be holding up well & kept their torque

http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 3D1&_rdc=1

set was in red for the mrs's XTR M970 + triple Rotor Q-Rings, no probs installing them but was extra cautious winding up the threads

_________________
MTB components on scales: http://www.flickr.com/photos/culturespo ... 294427667/

Top

Amaro

Post subject: Re: KCNC Alloy bolts in XTR Crankset

Posted: Fri Dec 18, 2009 11:29 pm

Joined: Sat Dec 13, 2008 2:33 pm
Posts: 72
Location: Vigo (Spain)

I haven´t had any issue with them since february...http://img194.imageshack.us/i/dscn5586c.jpg

http://img194.imageshack.us/img194/4444/dscn5586c.jpg

Edited. The pics were just a wee bit larger than permitted on the forum. :wink:

Merry x-mas to all, by the way! Powerful Pete.

_________________
Rider on the storm...

Top

Fretje13

Post subject: Re: KCNC Alloy bolts in XTR Crankset

Posted: Thu Dec 24, 2009 11:24 am

Joined: Tue Nov 11, 2008 2:23 pm
Posts: 12
Location: Belgium

Had the bolts in my XTR crank.
Lost 2 bolts in 4 months..

Top

emike

Post subject: Re: KCNC Alloy bolts in XTR Crankset

Posted: Wed Feb 06, 2013 12:10 pm

Joined: Fri Jul 06, 2007 4:46 pm
Posts: 70
Location: Tallinn

I want to put some colour on my XTR960 JJ mod. cranks. What bolts are strongest KCNC or TISO?

Top

Page 1 of 1

[ 10 posts ]

Board index » Discussion » MTB

Who is online

Users browsing this forum: No registered users and 8 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

	Author	Replies	Views	Last post
alloy bolts sram red 2013 in Road	c90sx	4	492	Fri Feb 01, 2013 1:26 pm stevec1975
ti anti sieze grease required for ti bolts on alloy stem? in MTB	nrsnow	7	925	Tue Oct 09, 2012 12:44 pm miceden
KCNC chainring bolts Rotor 3D crank in Road	coolmingli	1	489	Fri Jun 07, 2013 2:46 am mjduct
+/- 4 deg alloy stem? in Road	AllAboutTheEngine	1	253	Thu Dec 13, 2012 9:37 pm NGMN
Alloy Tubular Advice in Road	mattydubs	2	319	Fri Mar 15, 2013 7:14 pm rc32