DA compatibility

Ivan · **Joined:** Mon Oct 20, 2003 7:11 pm **Posts:** 341

Searching the web i saw the following: 12 - 21 ratio of the new DA 10 sp cassette does not work with the WH-R540 wheels, see:

http://dura-ace.shimano.com/publish/con ... faq_s.html

Why is that ?? I ma not buying this combination, just curious.

Cheers
I

Superlite · **Posted:** Tue Jan 13, 2004 6:21 pm

It won't work because the largest cog, the 21 tooth has too small of a diameter to clear the hubs end at the free hub. Any thing larger will clear the tolerence.

Ye Olde Balde One · **Posted:** Tue Jan 13, 2004 6:26 pm

It's because the wheel design department didn't talk to the cassette design department.

Otherwise known as a big screw up! :twisted:

Ivan · **Joined:** Mon Oct 20, 2003 7:11 pm **Posts:** 341

What about a 12-21 9 speed casette then ?? If i undertsand your explanation correctly that doesn't work either ! Right ?

Ivan · **Joined:** Mon Oct 20, 2003 7:11 pm **Posts:** 341

Quote:

known as a big screw up!

AKA shimano ... lol

:-) · **Joined:** Thu Nov 06, 2003 9:37 pm **Posts:** 79

shimano website wrote:

12. Can I use the new 10-speed cassette on my current Shimano wheels?
The new 10-speed cassettes will be compatible with WH-7701, WH-7701-Carbon, and WH-R540* when used with a thin washer supplied with the aftermarket cassettes. In addition, you can only use the 12-25 &12-27 CS-7800 cassettes with the WH-7700 and WH-7700-Carbon wheels.

*Note: The 11-21 CS-7800 cassette combination will not be compatible with the WH-R540. All other ratios will work just fine.

are you refering to this? it says the 11-21? says everything else is ok.... surely that makes the 12-21 ok?

Joel · **Posted:** Tue Jan 13, 2004 8:56 pm

This is just something typically ShimaNO. :roll:

Ivan · **Joined:** Mon Oct 20, 2003 7:11 pm **Posts:** 341

Quote:

are you refering to this?

No i was refering to the explanation of Superlite:

Quote:

It won't work because the largest cog, the 21 tooth has too small of a diameter to clear the hubs end at the free hub. Any thing larger will clear the tolerence

the cassette wont work because 21 tooth is too small. What about a 12-21 9 speed (instead of a 10 speed) ?
Are there other wheels/hubs that have this problem too ?

Oswald · **Joined:** Thu Jan 08, 2004 10:11 pm **Posts:** 547

Why would you want to mount a DA cassette on a 105 wheelset?

Ivan · **Joined:** Mon Oct 20, 2003 7:11 pm **Posts:** 341

no, as i said:

Quote:

just curious.

:-) · **Joined:** Thu Nov 06, 2003 9:37 pm **Posts:** 79

Ivan wrote:

Quote:

are you refering to this?

No i was refering to the explanation of Superlite:

Quote:

It won't work because the largest cog, the 21 tooth has too small of a diameter to clear the hubs end at the free hub. Any thing larger will clear the tolerence

the cassette wont work because 21 tooth is too small. What about a 12-21 9 speed (instead of a 10 speed) ?
Are there other wheels/hubs that have this problem too ?

ivan, you quite clearly say that whilst searching the web you found that 12-21 doesnt work... & include the link? the link says 11-21 & says everything else is fine????

i cant see how in your origional post you were refering to superlite when he hadent posted it yet?

Ivan · **Joined:** Mon Oct 20, 2003 7:11 pm **Posts:** 341

Sure in my original post i was refering to the explanation from the shimano website (the one you quoted) but in my second post i was refering to the explanation of superlite. He says a 21 tooth is too small of a diameter so if i get it right a 12-21 9 speed is also too small of a diameter and now i am wondering are there other wheels/hubs that have this "problem" or is it just shimano ?
Sorry about the misunderstanding !

:-) · **Joined:** Thu Nov 06, 2003 9:37 pm **Posts:** 79

my dad has a set ov those wheels with a 21 tooth 9 speed casette on...

Ye Olde Balde One · **Posted:** Wed Jan 14, 2004 5:44 pm

Ivan wrote:

Sure in my original post i was refering to the explanation from the shimano website (the one you quoted) but in my second post i was refering to the explanation of superlite. He says a 21 tooth is too small of a diameter so if i get it right a 12-21 9 speed is also too small of a diameter and now i am wondering are there other wheels/hubs that have this "problem" or is it just shimano ?
Sorry about the misunderstanding !

I think this can always be a problem depending on the hub flange. Velomax can have this problem, same with some Spinergy wheels. I tried fitting a Tiso 11-21t cassette to a Zipp wheel once and found it touched the hub unless I put in an extra spacer, problem was the rivets for the bottom sprocket were hitting the hub.

Ivan · **Joined:** Mon Oct 20, 2003 7:11 pm **Posts:** 341

Quote:

my dad has a set ov those wheels with a 21 tooth 9 speed casette on...

so the problem is limited to a 10 sp cassette
I think im starting to understand the problem here ...
Im glad you all cleared that out.

	Author	Replies	Views	Last post
BB30 Compatibility in Road	therouler	4	496	Sat Jun 01, 2013 12:11 pm thisisatest
Campagnolo BB compatibility. [ Go to page: 1, 2 ] in Road	Lewis	22	944	Fri Jan 25, 2013 8:44 am paddyrider
Specialized Srm - BB compatibility in Road	micky	3	181	Sat Apr 20, 2013 10:35 pm Machinenoise
SRM K-Force Light PC 7 compatibility in Road	DamoRider	1	221	Thu Dec 06, 2012 2:46 am thisisatest
BB compatibility Scott Foil in Road	merlin6014	3	447	Sun Feb 10, 2013 10:30 am merlin6014

DA compatibility

Who is online