I'm at;

- Wilier Cento Uno
- Velo Vie
- Cervelo (S2 is it?)
- and now the Pedalforce

_________________
http://www.nicksquillari.com.au
The Gram
The Men of Steel

thats without counting the fondriest. carrera, javelin ,etc... I forgot the other ones haha

_________________
████████████ MARTINI

well the regular price is still 890$ for the frame which is still pretty good.

so how many bikes you got now Cippo?

_________________
████████████ MARTINI

Tooooo many!
Some are sold, others given to family, but mostly, I'm crazy.
And yeah, I think $890 is pretty decent.
This frame looks sharp.

_________________
Blacksmith Cycle - bespoke bicycles - info@blacksmithcycle.com
Website: http://www.blacksmithcycle.com
Stage-Race Distribution - the world's finest bicycles
Website: http://www.stage-race.com

There we have it, it's official.

_________________
http://www.nicksquillari.com.au
The Gram
The Men of Steel

Does this frame use asymmetric headtube?
I'm looking for a decent carbon frame with normal BB shell and normal headtube...

Can that heavy-ass seatpost clamp be made any lighter?

Actually, I have an idea: since the seat-post-mast is designed to be able to be cut down to 31.8 sizing, and it is essentially round, could you not cut a curve at the top, drill it, and then use a cradle, bolts and hardware in the style of a KCNC post?... basically only adding around 30 or so grams (guessing) as opposed to the 100+ grams?

_________________
Exp001 || Other projects in the works.

The headtube is normal - not assymetric.

As for the clamp, I agree! I pm'd samu but got no response.
I would be VERY hesitant to self-alter this sort of thing.
I like the idea, but I'm not sure that the carbon is designed to handle a downward load in that very manner.

_________________
Blacksmith Cycle - bespoke bicycles - info@blacksmithcycle.com
Website: http://www.blacksmithcycle.com
Stage-Race Distribution - the world's finest bicycles
Website: http://www.stage-race.com

post removed

I have a better solution that would not make you lose resale value. since the tube is round and accept regular 31.6mm

seatpost, you could cut the tube to your size and use a cut down seatpost lets say 50-100mm with lightweight adjustment like the woodman seatpost. that thing should weigh around 40-50gr and you would have plenty adjustment if you wish to.

plus if you have to resale it, you have a wider public to sell it to since your not stuck with the adjustment if someone a bit
taller than you or smaller wants to buy it.

Its like what ruegamer does with his frames and if you look at the kuota kredo ultra too.

_________________
████████████ MARTINI

Great idea!

_________________
Exp001 || Other projects in the works.

I think even if you modify the stock seatpost clamp you will never lose about half the weight of the seatpost idea.

_________________
████████████ MARTINI

any update Mr. Cippo?

_________________
████████████ MARTINI

Cippo-
Please post some built up pictures when you are done. I love my PF RS2, but the CG1 is the hotness, judging from your pictures.

Thanks.

_________________
This board and the world in general would be a much nicer place if everyone could just take themselves a little less seriously.

sorry! posted to the wrong thread.

_________________
For certain parts stiffer is more important than lighter.