FAQ     Search     Trending Topics Login    Register
HOME Listings Blog NEW Galleries NEW FAQ Contact About Impressum
 It is currently Mon Oct 23, 2017 10:00 pm

 All times are UTC+01:00

 Post new topic  Reply to topic Page 1 of 224 [ 3348 posts ] Go to page 1 2 3 4 5 … 224 Next
 Print view Previous topic | Next topic
Author Message
 Post subject: New powermeter rumoursPostPosted: Thu Feb 26, 2009 5:51 pm
 Offline

Joined: Sat Oct 25, 2003 7:12 pm
Posts: 171
In cycling magazine today, aparantly new powermeter. This time a pedal based powermeter, one on both sides, so measures bith legs independantly. Also supposed to be more affordable. Does annyone have any more info on this?

Top
 Post subject: New powermeter rumoursPosted: Thu Feb 26, 2009 5:51 pm

Top

 Post subject: Re: New powermeter rumoursPostPosted: Thu Feb 26, 2009 6:05 pm
 Offline

Joined: Wed Sep 26, 2007 1:57 pm
Posts: 7926
Location: San Francisco, CA
I've also heard about this before. It's a bit of a challenge, as you want force · velocity (vector dot product), not |force|×|velocity|.

So what you need is some way to determine the speed and direction of pedal motion relative to the direction force is being applied to the pedal. And that force has two significant components, even relative to the pedal surface, as you can apply a motion normal to the surface, but with cleats locked in, an additional component parallel to the surface ("scraping mud off the bottom of your shoe", as Coach Troy encourages, after LeMond).

_________________
http://djconnel.blogspot.com/
Fuji SL/1

Top
 Post subject: PostPosted: Thu Feb 26, 2009 8:13 pm
 Offline

Joined: Wed Mar 19, 2008 10:08 pm
Posts: 62
Location: Moss Beach
Could you tell me the name of the Cycling Magazine and the Month ?

Thanks.

Top
 Post subject: Re: New powermeter rumoursPostPosted: Thu Feb 26, 2009 8:30 pm
 Offline Shop Owner

Joined: Sun Jan 08, 2006 9:12 am
Posts: 2194
Location: Alto, NM
djconnel wrote:
So what you need is some way to determine the speed and direction of pedal motion relative to the direction force is being applied to the pedal.

You'd need the component that is perpendicular to the crank... but how hard would this be? Seems like you could orient the strain gauges in that direction and it would take care of itself.

Top
 Post subject: Re: New powermeter rumoursPostPosted: Thu Feb 26, 2009 8:39 pm
 Offline

Joined: Wed Sep 26, 2007 1:57 pm
Posts: 7926
Location: San Francisco, CA
rruff wrote:
You'd need the component that is perpendicular to the crank... but how hard would this be? Seems like you could orient the strain gauges in that direction and it would take care of itself.

Oh -- they'd need to be in the spindle, not the pedal (duh). Then you need to make sure the spindle is aligned properly in the crank, somehow. Errors would be second order (proportional to 1 - cos θ) in the rotation error.

Then you just need to know the rate of rotation. Using a cadence sensor and assuming constant rate of rotation is probably usually a decent approximation. You could do better by separately detecting each crank arm, but that would add complexity and mass.

I have no idea how to engineer a strain gauge in a pedal spindle, but then I know very little about how to design with strain gauges...

_________________
http://djconnel.blogspot.com/
Fuji SL/1

Top
 Post subject: PostPosted: Thu Feb 26, 2009 8:41 pm
 Offline

Joined: Mon Dec 01, 2003 12:35 am
Posts: 1474
I would think this would be the next evolution in power meters, and a logical step forward in the technology-not only to make the actual gadget affordable, but also to measure the force being exerted by each leg independently.

_________________
Check out the latest controversies in sport-

http://berzin.blogspot.com/

Top
 Post subject: Re: New powermeter rumoursPostPosted: Thu Feb 26, 2009 8:41 pm
 Offline

Joined: Wed May 21, 2008 5:44 pm
Posts: 205
Location: Fort Mill, SC
rruff wrote:
djconnel wrote:
So what you need is some way to determine the speed and direction of pedal motion relative to the direction force is being applied to the pedal.

You'd need the component that is perpendicular to the crank... but how hard would this be? Seems like you could orient the strain gauges in that direction and it would take care of itself.

You will need a strain gage in both directions to calculate the normal force. I used a set of these as part of a research study (not road worth - CNC machined blocks the size of a cigarette pack).

One problem with this is that pedals are a fairly high wear item as compared to a crank spider, since it contains small axles and bearings. The wear surfaces could be modular though.

Top
 Post subject: PostPosted: Thu Feb 26, 2009 8:56 pm
 Offline

Joined: Wed Sep 26, 2007 1:57 pm
Posts: 7926
Location: San Francisco, CA
You've also got to communicate the information off the pedal/spindle. On a crank like the Quarq, you have plenty of room for battery & electronics. With pedal stance (Q) and cornering clearance concerns, as well as individual preference on pedal design (for example preferring double-sided entry, different amounts of float, etc), it seems the crank is a much better location for this sort of thing. Hard to see a practical design.

_________________
http://djconnel.blogspot.com/
Fuji SL/1

Top
 Post subject: PostPosted: Thu Feb 26, 2009 9:12 pm
 Offline

Joined: Sat Oct 25, 2003 7:12 pm
Posts: 171
not much info in article, this weeks cycling weekly in UK. Basically states in about 3 lines new powermeter, not crank hub or bottom bracket based. Pedal based, in theory cheaper and would give individual leg outputs

Top
 Post subject: PostPosted: Thu Feb 26, 2009 9:42 pm
 Offline Shop Owner

Joined: Sun Jan 08, 2006 9:12 am
Posts: 2194
Location: Alto, NM
djconnel wrote:
Hard to see a practical design.

I tend to agree... if it is any good it won't be simple or cheap. You need to two complete meters (each pedal) plus they need to communicate... probably wirelessly... to the cpu. Hard to fit all that into a tiny space... but looking at a Shimano pedal for instance, they could put "stuff" in the hollow spot ahead of the spindle... maybe that is enough.

I thought of using a system were the chainrings and left crank are attached to an outer tube (optical torque measuring tube) while the right crank is connected to the left one via a separate (inner) spindle. Sort of like Ergomo but without the one leg limitations. I think with the large diameter BB tubes being used now, this would be viable.

Top
 Post subject: PostPosted: Thu Feb 26, 2009 10:06 pm
 Offline

Joined: Sat Oct 13, 2007 7:16 am
Posts: 1343
Location: Lyon, France
rruff wrote:
You need to two complete meters (each pedal) plus they need to communicate... probably wirelessly... to the cpu. Hard to fit all that into a tiny space...

If it was actually on the spindle, hard wiring it to an electronics pack elsewhere on the crank might be doable... but for the other reasons, it still seems like a dumb idea. Aren't the elastic elements in most strain gauges aluminium? That's not going to work for pedal spindles...

_________________
Graham

Top
 Post subject: PostPosted: Thu Feb 26, 2009 10:51 pm
 Offline

Joined: Fri Jun 24, 2005 3:27 pm
Posts: 507
Location: London, UK
My old teammate has spent 3 years writing software for cyclekinetics. They have designed a system of strain gauges and accelerometers in the sole of bespoke shoes. This would measure power independently obviously and also allow analysis of pedalling efficiency. They had some pretty heavyweight interest - eg a presentation to Bjarne Riis, plus coaching input from Heiko Salzwedel.

But...... the last I heard it was shelved as they ran out of money for hardware. My friend wrote the software for free for a small share of the company.
They still have a token website, bizarrely in Latin!

P.S. My mate Steve is proprietor of sdeals.com, if any of you have dealings with him.

Top
 Post subject: PostPosted: Thu Feb 26, 2009 11:07 pm
 Offline

Joined: Tue Jul 27, 2004 4:57 am
Posts: 202
racyrich wrote:
They still have a token website, bizarrely in Latin!

That's the standard typesetter (and now, web designer) placeholder text. http://www.lipsum.com/

Top
 Post subject: Why not in the crank arms?PostPosted: Fri Feb 27, 2009 12:24 am
 Offline

Joined: Wed Jun 07, 2006 2:45 pm
Posts: 75
Why not in the crank arms? Does somebody hold a patent on that concept? That would be the best and most accurate place to take the measurements, yet nobody produces one. Why?

Top
 Post subject: PostPosted: Fri Feb 27, 2009 12:49 am
 Offline in the industry

Joined: Thu Jan 08, 2009 12:16 pm
Posts: 161
Location: Melbourne Australia
A friend of mine has developed a system in the crank arms. The German trackies have also used them over the years, Check out www.fes-sport.de

_________________
Specialist Sports Technology
http://www.luescherteknik.com.au
Zerocompromise High Performance Footwear
http://www.zerocompromise.com.au
Carbon Bike Repairs
http://www.carbonbikerepair.com.au

Top
 Post subject: Posted: Fri Feb 27, 2009 12:49 am

Top

 Display posts from previous: All posts1 day7 days2 weeks1 month3 months6 months1 year Sort by AuthorPost timeSubject AscendingDescending
 Post new topic  Reply to topic Page 1 of 224 [ 3348 posts ] Go to page 1 2 3 4 5 … 224 Next

Similar Topics   Author   Replies   Views   Last post
There are no new unread posts for this topic. Can't Pairing PC7 with SRM Powermeter

Molek

5

582

Mon Oct 16, 2017 2:12 pm

There are no new unread posts for this topic. Attachment(s) Shimano R9100-P Powermeter

[ Go to page: 1 2 3 4 ]

jay cee

50

7978

Sun Oct 15, 2017 9:18 am

There are no new unread posts for this topic. Garmin Powermeter question

PrettyA

7

453

Tue Aug 29, 2017 10:53 am

There are no new unread posts for this topic. quarq powermeter connection to mac failing

weptunus

3

576

Fri Aug 18, 2017 4:17 am

There are no new unread posts for this topic. Powermeter Help - P2M Force vs Dzero Red vs InPower

[ Go to page: 1 2 ]

MikeyBE

15

1628

Sat Apr 01, 2017 10:49 am

 All times are UTC+01:00

#### Who is online

Users browsing this forum: anderscash, bilwit, Discodan, DOUG, dvq, Google Adsense [Bot], madik, MattSoutherden, MRM, plpete, youngs_modulus and 59 guests

 You cannot post new topics in this forumYou cannot reply to topics in this forumYou cannot edit your posts in this forumYou cannot delete your posts in this forumYou cannot post attachments in this forum

Search for:
 Jump to:  Select a forum ------------------ General    Weight Weenies    Introduce Yourself / Gallery - Please use metric weights.       Catch all // Gallery threads Discussion    MTB    Road       Everything wheels    Cyclocross / Gravel / Touring       Commuting    Training    Cycle Chat    For sale - Pictures are mandatory 22-3-13    Wanted Misc