Radiographic test for carbon fiber frame

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

Infin1ty
Posts: 183
Joined: Sun Mar 12, 2006 8:25 pm
Location: Israel

by Infin1ty

I want to check a frame for cracks, is a radiographic test (NDT) is the test i should be looking after?
Is this test a realiable one for carbon parts?

Thanks.

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



KB
Posts: 3967
Joined: Mon Jan 12, 2004 12:32 pm
Location: HULL UK

by KB

Must admit I've never heard of it on CF although I think it's possible. But normally they would be checking things much thicker than bikes.

NDT is normal on metals, usually carbon, stainless, and other duplex steels.

User avatar
Taz
Posts: 783
Joined: Thu Sep 15, 2005 10:19 am
Location: Greece

by Taz

It can be done, though it would cost a lot of money to cover all of the frame and radiograph it from various angles to find any cracks.
Here are some photos:

Image

Image

Image

San Marco
Posts: 373
Joined: Fri Jul 01, 2005 3:58 pm
Location: UK

by San Marco

Good pictures but be warned look term exposure to x-ray is not good for your frames health :wink:

User avatar
ALE
Posts: 101
Joined: Wed Jun 21, 2006 11:25 am
Location: Switzerland

by ALE

Quizz : which bike is it? :lol:
No matter the weather, ride!

RTW
in the industry
Posts: 3756
Joined: Thu Jun 16, 2005 2:32 pm

by RTW

Orbea with Campy?

frd
Posts: 1429
Joined: Mon May 08, 2006 8:45 pm

by frd

Orbea Orca, but the brakes are clearly Dura Ace (look at the small plastic thing on the cable adjuster). Also front der looks dura ace, but the cranks? FSA maybe?

User avatar
Giant DK
Posts: 1345
Joined: Mon Jan 23, 2006 3:03 pm
Location: Denmark

by Giant DK

frenk wrote:FSA maybe?


My guess too! Looks lige FSA/DA type of chainrings and torx screws!
Techn writer at Velomore Denmark

My Simplon Pavo II

Infin1ty
Posts: 183
Joined: Sun Mar 12, 2006 8:25 pm
Location: Israel

by Infin1ty

It was done by an insurance company, they only checked about 5 points! they said the frame is fine.
I still say the frame is not rideable and i am sure because i have a crack in the seatpost (its an integrated one, BH G-1) and it was tested with the seapost! and a few other imperfections places on the carbon.
I was hit by a car.
so actually this test is worthless?
Last edited by Infin1ty on Thu Sep 20, 2007 1:57 pm, edited 1 time in total.

frd
Posts: 1429
Joined: Mon May 08, 2006 8:45 pm

by frd

Infin1ty wrote:It was done by an insurance company, they only checked about 5 points! they said the frame is fine.
I still say the frame is not rideable and i am sure because i have a crack in the seatpost (its an integrated one, BH G-1) and a few other imperfections places on the carbon.
I was hit by a car.
so actually this test is worthless?

If it's an integrated seatpost and has a crack, they should have saved the money of the test! Not rideable to me!

Giant DK wrote:My guess too! Looks lige FSA/DA type of chainrings and torx screws!

Reminds me of that thread with title "You know you have ridden too much when..." :lol:

User avatar
Taz
Posts: 783
Joined: Thu Sep 15, 2005 10:19 am
Location: Greece

by Taz

The test is not worthless, but you have to look at the right places and shoot at the right angle. Unfortunatelly there is very little way of knowing which are the places/angles

Hosehead
Posts: 50
Joined: Sat Sep 16, 2006 6:02 pm

by Hosehead

KB wrote:NDT is normal on metals, usually carbon, stainless, and other duplex steels.

It is also normal on composite structures, altough the tests are often different.

ScienceIsCool
Posts: 649
Joined: Mon Jul 10, 2006 1:38 am
Location: Vancouver, BC
Contact:

by ScienceIsCool

In really thin composite structures (like a bike) I hear that the only reliable way to detect cracks or delamination is with a dye penetrant test. Apparently, it's exactly what it sounds like. The part is soaked in a tagged (UV marker, magnetic, or other) fluid, cleaned, and then illuminated to check for otherwise invisible cracks.

X-Rays will miss small or thin cracks completely, just like when doctors miss bone fractures. Poor contrast, diffraction, and resolution make it difficult.

John Swanson

Infin1ty
Posts: 183
Joined: Sun Mar 12, 2006 8:25 pm
Location: Israel

by Infin1ty

ScienceIsCool wrote:In really thin composite structures (like a bike) I hear that the only reliable way to detect cracks or delamination is with a dye penetrant test. Apparently, it's exactly what it sounds like. The part is soaked in a tagged (UV marker, magnetic, or other) fluid, cleaned, and then illuminated to check for otherwise invisible cracks.

X-Rays will miss small or thin cracks completely, just like when doctors miss bone fractures. Poor contrast, diffraction, and resolution make it difficult.

John Swanson

Do you have any reference which i can use it against the insurance company? something that will help me in court
I'm sick of them, they took their time for about a year, i'm going to take a lawsuit against them.

They always find "new things", for example, when the car hit me i crashed on my helmet really hard, there is a crack inside the helmet, but outside only minor scratches on the sticker which was removed, now they say because they don't see any big scratches i can use the helmet and it shows i didn't crash. (just to show you how "stupid" they act like).

ScienceIsCool
Posts: 649
Joined: Mon Jul 10, 2006 1:38 am
Location: Vancouver, BC
Contact:

by ScienceIsCool

Long link

It's tough, because a lot of the data has not been compiled into a single white paper on detecting damage in thin composites. Not that I know of, anyways. But there is a lot of data, like in the enormous link above. The authors found that the actual damaged area of a tube was 10 times larger than what was found via ultrasound.

John Swanson

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Post Reply